{"title":"Watco","description":"\u003cp data-start=\"430\" data-end=\"595\"\u003eWatco are market leaders in \u003cstrong data-start=\"458\" data-end=\"510\"\u003eindustrial floor repair and maintenance products\u003c\/strong\u003e, trusted by contractors, facilities managers and commercial operators across the UK.\u003c\/p\u003e\n\u003cp data-start=\"597\" data-end=\"835\"\u003eKnown for their tough, long-lasting systems, Watco specialise in \u003cstrong data-start=\"662\" data-end=\"740\"\u003econcrete floor repair mortars, levelling compounds and heavy-duty coatings\u003c\/strong\u003e designed for demanding environments such as warehouses, factories, workshops and loading bays.\u003c\/p\u003e\n\u003cp data-start=\"837\" data-end=\"1019\"\u003eFrom fast-curing repair products like \u003cstrong data-start=\"875\" data-end=\"894\"\u003eWatco Flowpatch\u003c\/strong\u003e to robust epoxy floor coatings, the range is engineered to minimise downtime while delivering professional, durable results.\u003c\/p\u003e\n\u003cp data-start=\"1021\" data-end=\"1191\"\u003e✔️ Heavy-duty industrial performance\u003cbr data-start=\"1057\" data-end=\"1060\"\u003e✔️ Fast-curing options available\u003cbr data-start=\"1092\" data-end=\"1095\"\u003e✔️ Suitable for forklift and vehicle traffic\u003cbr data-start=\"1139\" data-end=\"1142\"\u003e✔️ Ideal for commercial and industrial settings\u003c\/p\u003e\n\u003cp data-start=\"1193\" data-end=\"1314\"\u003eIf you're unsure which Watco product is right for your project, our team is happy to help you specify the correct system.\u003c\/p\u003e","products":[{"product_id":"watco-flowpatch","title":"Watco Flowpatch","description":"\u003cp data-start=\"476\" data-end=\"754\"\u003e\u003cstrong data-start=\"476\" data-end=\"495\"\u003eWatco Flowpatch\u003c\/strong\u003e is a heavy-duty, flowable floor repair mortar designed for fast and durable repairs to damaged concrete surfaces. Ideal for industrial and commercial environments, it levels and smooths worn, pitted or uneven concrete to create a strong, long-lasting finish.\u003c\/p\u003e\n\u003cp data-start=\"756\" data-end=\"1017\"\u003eIts self-smoothing formulation makes it easy to apply and perfect for repairing warehouse floors, factory units, loading bays and other high-traffic areas. Once cured, Flowpatch provides a tough surface capable of withstanding forklift and pallet truck traffic.\u003c\/p\u003e\n\u003cp data-start=\"1019\" data-end=\"1178\"\u003eWhether you’re preparing a surface for further coating or carrying out standalone repairs, Watco Flowpatch delivers professional results with minimal downtime.\u003c\/p\u003e\n\u003cp data-start=\"1019\" data-end=\"1178\"\u003e\u003ciframe width=\"755\" height=\"426\" src=\"https:\/\/www.youtube.com\/embed\/5tfaX3xF3bs\" title=\"How to Repair Holes In Concrete Floors with Flowpatch\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch3 data-start=\"1185\" data-end=\"1217\"\u003e\u003cstrong data-start=\"1191\" data-end=\"1215\"\u003eSurface Preparation\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul data-start=\"1219\" data-end=\"1638\"\u003e\n\u003cli data-start=\"1219\" data-end=\"1306\"\u003e\n\u003cp data-start=\"1221\" data-end=\"1306\"\u003eEnsure the surface is clean, dry and free from dust, grease, oil or loose material.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1307\" data-end=\"1405\"\u003e\n\u003cp data-start=\"1309\" data-end=\"1405\"\u003eRemove weak or friable concrete and mechanically prepare smooth surfaces to create a good key.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1406\" data-end=\"1494\"\u003e\n\u003cp data-start=\"1408\" data-end=\"1494\"\u003eAny contaminants such as oil or grease should be removed using a suitable degreaser.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1495\" data-end=\"1562\"\u003e\n\u003cp data-start=\"1497\" data-end=\"1562\"\u003ePrime the surface if required, especially on porous substrates.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1563\" data-end=\"1638\"\u003e\n\u003cp data-start=\"1565\" data-end=\"1638\"\u003eEnsure the substrate is sound and structurally stable before application.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-start=\"1645\" data-end=\"1672\"\u003e\u003cstrong data-start=\"1651\" data-end=\"1670\"\u003eTechnical Data\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cdiv class=\"TyagGW_tableContainer\"\u003e\n\u003cdiv class=\"group TyagGW_tableWrapper flex flex-col-reverse w-fit\" tabindex=\"-1\"\u003e\n\u003ctable data-start=\"1674\" data-end=\"2139\" class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead data-start=\"1674\" data-end=\"1696\"\u003e\n\u003ctr data-start=\"1674\" data-end=\"1696\"\u003e\n\u003cth data-start=\"1674\" data-end=\"1685\" data-col-size=\"sm\" class=\"\"\u003eProperty\u003c\/th\u003e\n\u003cth data-start=\"1685\" data-end=\"1696\" data-col-size=\"md\" class=\"\"\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody data-start=\"1722\" data-end=\"2139\"\u003e\n\u003ctr data-start=\"1722\" data-end=\"1766\"\u003e\n\u003ctd data-start=\"1722\" data-end=\"1731\" data-col-size=\"sm\"\u003eFinish\u003c\/td\u003e\n\u003ctd data-start=\"1731\" data-end=\"1766\" data-col-size=\"md\"\u003eSmooth \/ Flowable Repair Mortar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"1767\" data-end=\"1834\"\u003e\n\u003ctd data-start=\"1767\" data-end=\"1791\" data-col-size=\"sm\"\u003eApplication Thickness\u003c\/td\u003e\n\u003ctd data-start=\"1791\" data-end=\"1834\" data-col-size=\"md\"\u003eTypically 5–50mm (check TDS for limits)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"1835\" data-end=\"1885\"\u003e\n\u003ctd data-start=\"1835\" data-end=\"1847\" data-col-size=\"sm\"\u003eCure Time\u003c\/td\u003e\n\u003ctd data-start=\"1847\" data-end=\"1885\" data-col-size=\"md\"\u003eFast curing – walk on within hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"1886\" data-end=\"1920\"\u003e\n\u003ctd data-start=\"1886\" data-end=\"1901\" data-col-size=\"sm\"\u003eSuitable For\u003c\/td\u003e\n\u003ctd data-start=\"1901\" data-end=\"1920\" data-col-size=\"md\"\u003eConcrete floors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"1921\" data-end=\"1969\"\u003e\n\u003ctd data-start=\"1921\" data-end=\"1943\" data-col-size=\"sm\"\u003eInterior \/ Exterior\u003c\/td\u003e\n\u003ctd data-start=\"1943\" data-end=\"1969\" data-col-size=\"md\"\u003ePrimarily internal use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"1970\" data-end=\"2042\"\u003e\n\u003ctd data-start=\"1970\" data-end=\"1991\" data-col-size=\"sm\"\u003eTraffic Resistance\u003c\/td\u003e\n\u003ctd data-start=\"1991\" data-end=\"2042\" data-col-size=\"md\"\u003eSuitable for forklift and light vehicle traffic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"2043\" data-end=\"2081\"\u003e\n\u003ctd data-start=\"2043\" data-end=\"2054\" data-col-size=\"sm\"\u003eCoverage\u003c\/td\u003e\n\u003ctd data-start=\"2054\" data-end=\"2081\" data-col-size=\"md\"\u003eVaries by depth applied\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"2082\" data-end=\"2139\"\u003e\n\u003ctd data-start=\"2082\" data-end=\"2103\" data-col-size=\"sm\"\u003eApplication Method\u003c\/td\u003e\n\u003ctd data-start=\"2103\" data-end=\"2139\" data-col-size=\"md\"\u003ePour and trowel \/ smoothing tool\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp data-start=\"2141\" data-end=\"2239\"\u003e\u003cem data-start=\"2141\" data-end=\"2239\"\u003e(Always refer to the official Watco technical data sheet for precise coverage and curing times.)\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3 data-start=\"2246\" data-end=\"2277\"\u003e\u003cstrong data-start=\"2252\" data-end=\"2275\"\u003eDirections for Use\u003c\/strong\u003e\u003c\/h3\u003e\n\u003col data-start=\"2279\" data-end=\"2647\"\u003e\n\u003cli data-start=\"2279\" data-end=\"2340\"\u003e\n\u003cp data-start=\"2282\" data-end=\"2340\"\u003ePrepare the substrate thoroughly and ensure it is sound.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2341\" data-end=\"2426\"\u003e\n\u003cp data-start=\"2344\" data-end=\"2426\"\u003eMix the product as instructed until a smooth, lump-free consistency is achieved.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2427\" data-end=\"2472\"\u003e\n\u003cp data-start=\"2430\" data-end=\"2472\"\u003ePour directly onto the prepared surface.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2473\" data-end=\"2543\"\u003e\n\u003cp data-start=\"2476\" data-end=\"2543\"\u003eSpread using a trowel or smoothing tool to the desired thickness.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2544\" data-end=\"2598\"\u003e\n\u003cp data-start=\"2547\" data-end=\"2598\"\u003eAllow to cure fully before subjecting to traffic.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2599\" data-end=\"2647\"\u003e\n\u003cp data-start=\"2602\" data-end=\"2647\"\u003eDo not apply in very cold or damp conditions.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eData Sheets\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/flowpatch_TDS.pdf?v=1771584278\" title=\"Watco Flowpatch - TDS\" rel=\"noopener\" target=\"_blank\"\u003eWatco Flowpatch - TDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/Flowpatch__GB_EN__7_00__01_12_2024.pdf?v=1771584277\" title=\"Watco Flowpatch - MSDS\" rel=\"noopener\" target=\"_blank\"\u003eWatco Flowpatch - MSDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"Grey \/ 10kg","offer_id":53773502677332,"sku":"XFP10NC","price":64.49,"currency_code":"GBP","in_stock":true},{"title":"Grey \/ 25kg","offer_id":53773502710100,"sku":"XFP25NC","price":157.79,"currency_code":"GBP","in_stock":true},{"title":"Tile Red \/ 25kg","offer_id":53773502775636,"sku":"XFP25NCTRD","price":182.79,"currency_code":"GBP","in_stock":true},{"title":"Stone \/ 25kg","offer_id":53773502841172,"sku":"XFP25NCBUF","price":182.79,"currency_code":"GBP","in_stock":true},{"title":"Green \/ 25kg","offer_id":53773502906708,"sku":"XFP25NCGRN","price":182.79,"currency_code":"GBP","in_stock":true},{"title":"Blue \/ 25kg","offer_id":53773502972244,"sku":"XFP25NCBLU","price":182.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/Watco_Flowpatch_one.webp?v=1771589637"},{"product_id":"watco-flowpatch-repair-bundle-pack","title":"Watco Flowpatch Repair Bundle Pack","description":"\u003cdiv class=\"text-base my-auto mx-auto pb-10 [--thread-content-margin:--spacing(4)] @w-sm\/main:[--thread-content-margin:--spacing(6)] @w-lg\/main:[--thread-content-margin:--spacing(16)] px-(--thread-content-margin)\"\u003e\n\u003cdiv class=\"[--thread-content-max-width:40rem] @w-lg\/main:[--thread-content-max-width:48rem] mx-auto max-w-(--thread-content-max-width) flex-1 group\/turn-messages focus-visible:outline-hidden relative flex w-full min-w-0 flex-col agent-turn\" tabindex=\"-1\"\u003e\n\u003cdiv class=\"flex max-w-full flex-col grow\"\u003e\n\u003cdiv data-message-author-role=\"assistant\" data-message-id=\"a30a53ab-3aeb-41e2-a615-a2bdcc4a0b82\" dir=\"auto\" data-message-model-slug=\"gpt-5-2\" class=\"min-h-8 text-message relative flex w-full flex-col items-end gap-2 text-start break-words whitespace-normal [.text-message+\u0026amp;]:mt-1\"\u003e\n\u003cdiv class=\"flex w-full flex-col gap-1 empty:hidden first:pt-[1px]\"\u003e\n\u003cdiv class=\"markdown prose dark:prose-invert w-full wrap-break-word dark markdown-new-styling\"\u003e\n\u003cp data-start=\"487\" data-end=\"646\"\u003e\u003cstrong data-start=\"487\" data-end=\"525\"\u003eWatco Flowpatch Repair Bundle Pack\u003c\/strong\u003e provides everything you need to carry out strong, long-lasting repairs to damaged concrete floors in one convenient kit.\u003c\/p\u003e\n\u003cp data-start=\"648\" data-end=\"966\"\u003eDesigned for industrial and commercial environments, this bundle combines Watco’s heavy-duty \u003cstrong data-start=\"741\" data-end=\"768\"\u003eFlowpatch repair mortar\u003c\/strong\u003e with the appropriate \u003cstrong data-start=\"790\" data-end=\"800\"\u003eprimer\u003c\/strong\u003e, ensuring excellent adhesion and durability. It’s ideal for repairing worn, pitted or uneven concrete surfaces prior to coating or for standalone structural repairs.\u003c\/p\u003e\n\u003cp data-start=\"968\" data-end=\"1136\"\u003ePerfect for warehouses, factories, workshops and loading areas, the system creates a smooth, hard-wearing finish capable of handling forklift and light vehicle traffic.\u003c\/p\u003e\n\u003cp data-start=\"1138\" data-end=\"1295\"\u003eIf you’re looking for a reliable, professional repair solution with minimal downtime, this complete kit makes the process straightforward and cost-effective.\u003c\/p\u003e\n\u003ch4\u003e\u003cspan\u003eThe bundle includes\u003c\/span\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFlowpatch Grey 25kg \u003c\/li\u003e\n\u003cli\u003eMixing Blade - for thorough mixing of Watco Flowpatch\u003c\/li\u003e\n\u003cli\u003eSteel Float- for a smooth finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eFlowpatch® is an easy to mix, pourable material for quick repairs to holes in level concrete, inside or outside. It is very strong and hardens quickly: it will accept heavy traffic including forklifts only 2 hours after application.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis paddle mixer is a sturdy metal mixing blade to be use with\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.watco.co.uk\/products\/watco-flowtop\"\u003eFlowtop\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.watco.co.uk\/products\/watco-flowpatch\"\u003eFlowpatch®\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eto ensure an even mix is achieved. Can be washed and reused once application has finished.\u003c\/p\u003e\n\u003cp\u003eA durable 10” steel float with a wooden handle ideal for Flowpatch® application.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eJust add water, mix and pour\u003c\/li\u003e\n\u003cli\u003eCan be applied to damp (not wet) concrete\u003c\/li\u003e\n\u003cli\u003eSets at low temperatures (down to 5°C)\u003c\/li\u003e\n\u003cli\u003eFlowpatch® can be applied from feather edge to 100mm\u003c\/li\u003e\n\u003cli\u003eLight grey, slip resistant finish\u003c\/li\u003e\n\u003cli\u003eFibre reinforced\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe title=\"How to Repair Holes In Concrete Floors with Flowpatch\" src=\"https:\/\/www.youtube.com\/embed\/5tfaX3xF3bs\" height=\"426\" width=\"755\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch3 data-start=\"1138\" data-end=\"1295\"\u003eSurface Preparation\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"markdown prose dark:prose-invert w-full wrap-break-word dark markdown-new-styling\"\u003e\n\u003cul data-start=\"1336\" data-end=\"1713\"\u003e\n\u003cli data-start=\"1336\" data-end=\"1417\"\u003e\n\u003cp data-start=\"1338\" data-end=\"1417\"\u003eEnsure the surface is clean, dry and free from dust, grease and contaminants.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1418\" data-end=\"1514\"\u003e\n\u003cp data-start=\"1420\" data-end=\"1514\"\u003eRemove loose or weak concrete and mechanically prepare smooth surfaces to create a good key.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1515\" data-end=\"1562\"\u003e\n\u003cp data-start=\"1517\" data-end=\"1562\"\u003eDegrease oil-contaminated areas thoroughly.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1563\" data-end=\"1648\"\u003e\n\u003cp data-start=\"1565\" data-end=\"1648\"\u003eApply the supplied primer as directed to ensure strong adhesion to the substrate.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1649\" data-end=\"1713\"\u003e\n\u003cp data-start=\"1651\" data-end=\"1713\"\u003eAllow primer to become tacky before applying Flowpatch mortar\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003ch3 class=\"markdown prose dark:prose-invert w-full wrap-break-word dark markdown-new-styling\"\u003e\u003cstrong data-start=\"1726\" data-end=\"1745\"\u003eTechnical Data\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cdiv class=\"markdown prose dark:prose-invert w-full wrap-break-word dark markdown-new-styling\"\u003e\n\u003cdiv class=\"TyagGW_tableContainer\"\u003e\n\u003cdiv class=\"group TyagGW_tableWrapper flex flex-col-reverse w-fit\" tabindex=\"-1\"\u003e\n\u003ctable data-start=\"1749\" data-end=\"2170\" class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead data-start=\"1749\" data-end=\"1771\"\u003e\n\u003ctr data-start=\"1749\" data-end=\"1771\"\u003e\n\u003cth data-start=\"1749\" data-end=\"1760\" data-col-size=\"sm\" class=\"\"\u003eProperty\u003c\/th\u003e\n\u003cth data-start=\"1760\" data-end=\"1771\" data-col-size=\"sm\" class=\"\"\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody data-start=\"1797\" data-end=\"2170\"\u003e\n\u003ctr data-start=\"1797\" data-end=\"1846\"\u003e\n\u003ctd data-start=\"1797\" data-end=\"1811\" data-col-size=\"sm\"\u003eSystem Type\u003c\/td\u003e\n\u003ctd data-start=\"1811\" data-end=\"1846\" data-col-size=\"sm\"\u003ePrimer + Flowable Repair Mortar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"1847\" data-end=\"1882\"\u003e\n\u003ctd data-start=\"1847\" data-end=\"1856\" data-col-size=\"sm\"\u003eFinish\u003c\/td\u003e\n\u003ctd data-start=\"1856\" data-end=\"1882\" data-col-size=\"sm\"\u003eSmooth concrete repair\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"1883\" data-end=\"1916\"\u003e\n\u003ctd data-start=\"1883\" data-end=\"1904\" data-col-size=\"sm\"\u003eSuitable Substrate\u003c\/td\u003e\n\u003ctd data-start=\"1904\" data-end=\"1916\" data-col-size=\"sm\"\u003eConcrete\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"1917\" data-end=\"1973\"\u003e\n\u003ctd data-start=\"1917\" data-end=\"1941\" data-col-size=\"sm\"\u003eApplication Thickness\u003c\/td\u003e\n\u003ctd data-start=\"1941\" data-end=\"1973\" data-col-size=\"sm\"\u003eTypically 5–50mm (check TDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"1974\" data-end=\"2033\"\u003e\n\u003ctd data-start=\"1974\" data-end=\"1995\" data-col-size=\"sm\"\u003eTraffic Resistance\u003c\/td\u003e\n\u003ctd data-start=\"1995\" data-end=\"2033\" data-col-size=\"sm\"\u003eForklift and light vehicle traffic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"2034\" data-end=\"2084\"\u003e\n\u003ctd data-start=\"2034\" data-end=\"2046\" data-col-size=\"sm\"\u003eCure Time\u003c\/td\u003e\n\u003ctd data-start=\"2046\" data-end=\"2084\" data-col-size=\"sm\"\u003eFast curing – walk on within hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"2085\" data-end=\"2129\"\u003e\n\u003ctd data-start=\"2085\" data-end=\"2107\" data-col-size=\"sm\"\u003eInterior \/ Exterior\u003c\/td\u003e\n\u003ctd data-start=\"2107\" data-end=\"2129\" data-col-size=\"sm\"\u003ePrimarily internal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"2130\" data-end=\"2170\"\u003e\n\u003ctd data-start=\"2130\" data-end=\"2141\" data-col-size=\"sm\"\u003eCoverage\u003c\/td\u003e\n\u003ctd data-start=\"2141\" data-end=\"2170\" data-col-size=\"sm\"\u003eVaries depending on depth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp data-start=\"2172\" data-end=\"2257\"\u003e\u003cem data-start=\"2172\" data-end=\"2257\"\u003e(Always refer to the official Watco TDS for full specification and coverage rates.)\u003c\/em\u003e\u003c\/p\u003e\n\u003cstrong data-start=\"2270\" data-end=\"2293\"\u003e\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003ch3 class=\"markdown prose dark:prose-invert w-full wrap-break-word dark markdown-new-styling\"\u003e\u003cstrong data-start=\"2270\" data-end=\"2293\"\u003eDirections for use \u003c\/strong\u003e\u003c\/h3\u003e\n\u003cdiv class=\"markdown prose dark:prose-invert w-full wrap-break-word dark markdown-new-styling\"\u003e\n\u003col data-start=\"2297\" data-end=\"2664\"\u003e\n\u003cli data-start=\"2297\" data-end=\"2358\"\u003e\n\u003cp data-start=\"2300\" data-end=\"2358\"\u003ePrepare the substrate thoroughly and ensure it is sound.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2359\" data-end=\"2412\"\u003e\n\u003cp data-start=\"2362\" data-end=\"2412\"\u003eApply the supplied primer evenly to the surface.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2413\" data-end=\"2483\"\u003e\n\u003cp data-start=\"2416\" data-end=\"2483\"\u003eAllow primer to reach the correct tack stage as per instructions.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2484\" data-end=\"2534\"\u003e\n\u003cp data-start=\"2487\" data-end=\"2534\"\u003eMix Flowpatch mortar to a smooth consistency.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2535\" data-end=\"2611\"\u003e\n\u003cp data-start=\"2538\" data-end=\"2611\"\u003ePour and spread to required thickness using a trowel or smoothing tool.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2612\" data-end=\"2664\"\u003e\n\u003cp data-start=\"2615\" data-end=\"2664\"\u003eAllow to cure fully before subjecting to traffic.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eData sheets\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/flowpatch_TDS.pdf?v=1771584278\" title=\"Watco Flowpatch TDS\" rel=\"noopener\" target=\"_blank\"\u003eWatco Flowpatch Repair Bundle Pack - TDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/Flowpatch__GB_EN__7_00__01_12_2024.pdf?v=1771584277\" title=\"Watco Flowpatch Repair Bundle Pack - MSDS\" rel=\"noopener\" target=\"_blank\"\u003eWatco Flowpatch Repair Bundle Pack - MSDS\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Watco","offers":[{"title":"25kg","offer_id":53774047019348,"sku":"XFPRK","price":173.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/Watco_Floorpatch_Bundle.webp?v=1771595329"},{"product_id":"watco-firm-step-grp-edge","title":"Watco Firm-Step Heavy Duty GRP Edge Covers","description":"\u003cp data-start=\"445\" data-end=\"598\"\u003e\u003cstrong data-start=\"445\" data-end=\"472\"\u003eWatco FirmStep GRP Edge\u003c\/strong\u003e is a heavy-duty anti-slip stair nosing designed to improve safety on steps in industrial, commercial and public environments.\u003c\/p\u003e\n\u003cp data-start=\"600\" data-end=\"884\"\u003eManufactured from durable \u003cstrong data-start=\"626\" data-end=\"660\"\u003eglass reinforced plastic (GRP)\u003c\/strong\u003e with an aggressive anti-slip surface, FirmStep provides outstanding grip underfoot — even in wet or high-traffic conditions. It’s ideal for upgrading worn or slippery step edges without replacing the entire stair structure.\u003c\/p\u003e\n\u003cp data-start=\"886\" data-end=\"1102\"\u003eSuitable for internal and external use, it can be fitted to concrete, metal, timber or stone steps, making it a practical safety solution for warehouses, factories, schools, public buildings and outdoor access areas.\u003c\/p\u003e\n\u003cp data-start=\"1104\" data-end=\"1210\"\u003eAvailable in a range of colours, widths and grades, including coarse finishes for maximum slip resistance.\u003c\/p\u003e\n\u003cp data-start=\"1104\" data-end=\"1210\"\u003e\u003ciframe width=\"1059\" height=\"595\" src=\"https:\/\/www.youtube.com\/embed\/sI1gh0Eeb94\" title=\"How to make steps safe with slip resistant stair covers | Watco\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch3 data-start=\"1217\" data-end=\"1249\"\u003e\u003cstrong data-start=\"1223\" data-end=\"1247\"\u003eSurface Preparation\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul data-start=\"1251\" data-end=\"1508\"\u003e\n\u003cli data-start=\"1251\" data-end=\"1316\"\u003e\n\u003cp data-start=\"1253\" data-end=\"1316\"\u003eEnsure the step surface is clean, dry and structurally sound.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1317\" data-end=\"1384\"\u003e\n\u003cp data-start=\"1319\" data-end=\"1384\"\u003eRemove loose paint, dirt, grease or debris before installation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1385\" data-end=\"1439\"\u003e\n\u003cp data-start=\"1387\" data-end=\"1439\"\u003eFor best adhesion, lightly abrade smooth surfaces.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1440\" data-end=\"1508\"\u003e\n\u003cp data-start=\"1442\" data-end=\"1508\"\u003eMark and drill fixing holes where mechanical fixing is required.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1510\" data-end=\"1627\"\u003eFirmStep can be bonded using a suitable adhesive and\/or mechanically fixed depending on substrate and traffic levels.\u003c\/p\u003e\n\u003ch3 data-start=\"1634\" data-end=\"1661\"\u003e\u003cstrong data-start=\"1640\" data-end=\"1659\"\u003eTechnical Data\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cdiv class=\"TyagGW_tableContainer\"\u003e\n\u003cdiv class=\"group TyagGW_tableWrapper flex flex-col-reverse w-fit\" tabindex=\"-1\"\u003e\n\u003ctable data-start=\"1663\" data-end=\"2060\" class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead data-start=\"1663\" data-end=\"1685\"\u003e\n\u003ctr data-start=\"1663\" data-end=\"1685\"\u003e\n\u003cth data-start=\"1663\" data-end=\"1674\" data-col-size=\"sm\" class=\"\"\u003eProperty\u003c\/th\u003e\n\u003cth data-start=\"1674\" data-end=\"1685\" data-col-size=\"sm\" class=\"\"\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody data-start=\"1713\" data-end=\"2060\"\u003e\n\u003ctr data-start=\"1713\" data-end=\"1758\"\u003e\n\u003ctd data-start=\"1713\" data-end=\"1724\" data-col-size=\"sm\"\u003eMaterial\u003c\/td\u003e\n\u003ctd data-start=\"1724\" data-end=\"1758\" data-col-size=\"sm\"\u003eGlass Reinforced Plastic (GRP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"1759\" data-end=\"1796\"\u003e\n\u003ctd data-start=\"1759\" data-end=\"1768\" data-col-size=\"sm\"\u003eFinish\u003c\/td\u003e\n\u003ctd data-start=\"1768\" data-end=\"1796\" data-col-size=\"sm\"\u003eCoarse Anti-Slip Surface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"1797\" data-end=\"1846\"\u003e\n\u003ctd data-start=\"1797\" data-end=\"1812\" data-col-size=\"sm\"\u003eSuitable For\u003c\/td\u003e\n\u003ctd data-col-size=\"sm\" data-start=\"1812\" data-end=\"1846\"\u003eConcrete, metal, timber, stone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"1847\" data-end=\"1881\"\u003e\n\u003ctd data-start=\"1847\" data-end=\"1858\" data-col-size=\"sm\"\u003eLocation\u003c\/td\u003e\n\u003ctd data-col-size=\"sm\" data-start=\"1858\" data-end=\"1881\"\u003eInternal \u0026amp; External\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"1882\" data-end=\"1937\"\u003e\n\u003ctd data-start=\"1882\" data-end=\"1900\" data-col-size=\"sm\"\u003eSlip Resistance\u003c\/td\u003e\n\u003ctd data-start=\"1900\" data-end=\"1937\" data-col-size=\"sm\"\u003eHigh grip, even in wet conditions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"1938\" data-end=\"1997\"\u003e\n\u003ctd data-start=\"1938\" data-end=\"1958\" data-col-size=\"sm\"\u003eColours Available\u003c\/td\u003e\n\u003ctd data-start=\"1958\" data-end=\"1997\" data-col-size=\"sm\"\u003eIncluding Yellow (others available)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"1998\" data-end=\"2029\"\u003e\n\u003ctd data-start=\"1998\" data-end=\"2014\" data-col-size=\"sm\"\u003eWidth Options\u003c\/td\u003e\n\u003ctd data-col-size=\"sm\" data-start=\"2014\" data-end=\"2029\"\u003ee.g. 1500mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"2030\" data-end=\"2060\"\u003e\n\u003ctd data-start=\"2030\" data-end=\"2040\" data-col-size=\"sm\"\u003eProfile\u003c\/td\u003e\n\u003ctd data-start=\"2040\" data-end=\"2060\" data-col-size=\"sm\"\u003ee.g. 70mm x 30mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp data-start=\"2062\" data-end=\"2148\"\u003e\u003cem data-start=\"2062\" data-end=\"2148\"\u003e(Refer to Watco technical data for specific load ratings and installation guidance.)\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3 data-start=\"2155\" data-end=\"2186\"\u003e\u003cstrong data-start=\"2161\" data-end=\"2184\"\u003eDirections for Use\u003c\/strong\u003e\u003c\/h3\u003e\n\u003col data-start=\"2188\" data-end=\"2512\"\u003e\n\u003cli data-start=\"2188\" data-end=\"2241\"\u003e\n\u003cp data-start=\"2191\" data-end=\"2241\"\u003eMeasure and cut to required length if necessary.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2242\" data-end=\"2293\"\u003e\n\u003cp data-start=\"2245\" data-end=\"2293\"\u003ePrepare the substrate to ensure good adhesion.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2294\" data-end=\"2357\"\u003e\n\u003cp data-start=\"2297\" data-end=\"2357\"\u003eApply a suitable adhesive to the underside of the profile.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2358\" data-end=\"2398\"\u003e\n\u003cp data-start=\"2361\" data-end=\"2398\"\u003ePosition firmly onto the step edge.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2399\" data-end=\"2451\"\u003e\n\u003cp data-start=\"2402\" data-end=\"2451\"\u003eSecure using mechanical fixings where required.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2452\" data-end=\"2512\"\u003e\n\u003cp data-start=\"2455\" data-end=\"2512\"\u003eAllow adhesive to cure before subjecting to foot traffic.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eData Sheets\u003c\/h4\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/firm_step_range-TDS.pdf?v=1771602201\" title=\"Watco Firm-Step GRP Edge - TDS\" rel=\"noopener\" target=\"_blank\"\u003eWatco Firm-Step GRP Edge - TDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"55mm x 1000mm \/ Yellow \/ Internal","offer_id":53774849835348,"sku":"X55SI1Y01","price":25.89,"currency_code":"GBP","in_stock":true},{"title":"55mm x 1000mm \/ Yellow \/ External","offer_id":53774849868116,"sku":"X55SE1Y01","price":25.89,"currency_code":"GBP","in_stock":true},{"title":"55mm x 1000mm \/ Black \/ Internal","offer_id":53774849900884,"sku":"X55SI1B01","price":25.89,"currency_code":"GBP","in_stock":true},{"title":"55mm x 1000mm \/ Black \/ External","offer_id":53774849933652,"sku":"X55SE1B01","price":25.89,"currency_code":"GBP","in_stock":true},{"title":"55mm x 1000mm \/ White \/ Internal","offer_id":53774849966420,"sku":"X55SI1W01","price":25.89,"currency_code":"GBP","in_stock":true},{"title":"55mm x 1000mm \/ White \/ External","offer_id":53774849999188,"sku":"X55SE1W01","price":25.89,"currency_code":"GBP","in_stock":true},{"title":"55mm x 1500mm \/ Yellow \/ Internal","offer_id":53774850031956,"sku":"X55SI15Y01","price":37.69,"currency_code":"GBP","in_stock":true},{"title":"55mm x 1500mm \/ Yellow \/ External","offer_id":53774850064724,"sku":"X55SE15Y01","price":37.69,"currency_code":"GBP","in_stock":true},{"title":"55mm x 1500mm \/ Black \/ Internal","offer_id":53774850097492,"sku":"X55SI15B01","price":37.69,"currency_code":"GBP","in_stock":true},{"title":"55mm x 1500mm \/ Black \/ External","offer_id":53774850130260,"sku":"X55SE15B01","price":37.69,"currency_code":"GBP","in_stock":true},{"title":"55mm x 1500mm \/ White \/ Internal","offer_id":53774850163028,"sku":"X55SI15W01","price":37.69,"currency_code":"GBP","in_stock":true},{"title":"55mm x 1500mm \/ White \/ External","offer_id":53774850195796,"sku":"X55SE15W01","price":37.69,"currency_code":"GBP","in_stock":true},{"title":"55mm x 2000mm \/ Yellow \/ Internal","offer_id":53774850228564,"sku":"X55SI2Y01","price":51.59,"currency_code":"GBP","in_stock":true},{"title":"55mm x 2000mm \/ Yellow \/ External","offer_id":53774850261332,"sku":"X55SE2Y01","price":51.59,"currency_code":"GBP","in_stock":true},{"title":"55mm x 2000mm \/ Black \/ Internal","offer_id":53774850294100,"sku":"X55SI2B01","price":51.59,"currency_code":"GBP","in_stock":true},{"title":"55mm x 2000mm \/ Black \/ External","offer_id":53774850326868,"sku":"X55SE2B01","price":51.59,"currency_code":"GBP","in_stock":true},{"title":"55mm x 2000mm \/ White \/ Internal","offer_id":53774850359636,"sku":"X55SI2W01","price":51.59,"currency_code":"GBP","in_stock":true},{"title":"55mm x 2000mm \/ White \/ External","offer_id":53774850392404,"sku":"X55SE2W01","price":51.59,"currency_code":"GBP","in_stock":true},{"title":"55mm x 3000mm \/ Yellow \/ Internal","offer_id":53774850425172,"sku":"X55SI3Y01","price":73.49,"currency_code":"GBP","in_stock":true},{"title":"55mm x 3000mm \/ Yellow \/ External","offer_id":53774850457940,"sku":"X55SE3Y01","price":73.49,"currency_code":"GBP","in_stock":true},{"title":"55mm x 3000mm \/ Black \/ Internal","offer_id":53774850490708,"sku":"X55SI3B01","price":73.49,"currency_code":"GBP","in_stock":true},{"title":"55mm x 3000mm \/ Black \/ External","offer_id":53774850523476,"sku":"X55SE3B01","price":73.49,"currency_code":"GBP","in_stock":true},{"title":"55mm x 3000mm \/ White \/ Internal","offer_id":53774850556244,"sku":"X55SI3W01","price":73.49,"currency_code":"GBP","in_stock":true},{"title":"55mm x 3000mm \/ White \/ External","offer_id":53774850589012,"sku":"X55SE3W01","price":73.49,"currency_code":"GBP","in_stock":true},{"title":"70mm x 1000mm \/ Yellow \/ Internal","offer_id":53774850621780,"sku":"XSEI1Y01","price":25.39,"currency_code":"GBP","in_stock":true},{"title":"70mm x 1000mm \/ Yellow \/ External","offer_id":53774850654548,"sku":"XSEE1Y01","price":25.39,"currency_code":"GBP","in_stock":true},{"title":"70mm x 1000mm \/ Black \/ Internal","offer_id":53774850687316,"sku":"XSEI1B01","price":25.39,"currency_code":"GBP","in_stock":true},{"title":"70mm x 1000mm \/ Black \/ External","offer_id":53774850720084,"sku":"XSEE15B01","price":25.89,"currency_code":"GBP","in_stock":true},{"title":"70mm x 1000mm \/ White \/ External","offer_id":53774850785620,"sku":"XSEE1W01","price":37.69,"currency_code":"GBP","in_stock":true},{"title":"70mm x 1500mm \/ Yellow \/ Internal","offer_id":53774850818388,"sku":"XSEI15Y01","price":37.69,"currency_code":"GBP","in_stock":true},{"title":"70mm x 1500mm \/ Yellow \/ External","offer_id":53774850851156,"sku":"XSEE15Y01","price":37.69,"currency_code":"GBP","in_stock":true},{"title":"70mm x 1500mm \/ Black \/ Internal","offer_id":53774850883924,"sku":"XSEI15B01","price":37.69,"currency_code":"GBP","in_stock":true},{"title":"70mm x 1500mm \/ Black \/ External","offer_id":53774850916692,"sku":"XSEE15B01","price":37.69,"currency_code":"GBP","in_stock":true},{"title":"70mm x 1500mm \/ White \/ Internal","offer_id":53774850949460,"sku":"X55SI15W01","price":37.69,"currency_code":"GBP","in_stock":true},{"title":"70mm x 2000mm \/ Yellow \/ Internal","offer_id":53774851014996,"sku":"XSEI2Y01","price":51.59,"currency_code":"GBP","in_stock":true},{"title":"70mm x 2000mm \/ Yellow \/ External","offer_id":53774851047764,"sku":"XSEE2Y01","price":51.59,"currency_code":"GBP","in_stock":true},{"title":"70mm x 2000mm \/ Black \/ Internal","offer_id":53774851080532,"sku":"XSEI2B01","price":51.59,"currency_code":"GBP","in_stock":true},{"title":"70mm x 2000mm \/ Black \/ External","offer_id":53774851113300,"sku":"XSEE2B01","price":51.59,"currency_code":"GBP","in_stock":true},{"title":"70mm x 3000mm \/ Yellow \/ Internal","offer_id":53774851211604,"sku":"XSEI3Y01","price":71.79,"currency_code":"GBP","in_stock":true},{"title":"70mm x 3000mm \/ Yellow \/ External","offer_id":53774851244372,"sku":"XSEE3Y01","price":71.79,"currency_code":"GBP","in_stock":true},{"title":"70mm x 3000mm \/ Black \/ Internal","offer_id":53774851277140,"sku":"XSEI3B01","price":71.79,"currency_code":"GBP","in_stock":true},{"title":"70mm x 3000mm \/ Black \/ External","offer_id":53774851309908,"sku":"XSEE3B01","price":71.79,"currency_code":"GBP","in_stock":true},{"title":"70mm x 3000mm \/ White \/ External","offer_id":53774851375444,"sku":"XSEE3W01","price":71.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/GRP_Anti-Slip_Step_Covers.webp?v=1777561195"},{"product_id":"watco-concrex-carbon-fibre-epoxy-repair-mortar","title":"Watco Concrex Carbon Fibre - Epoxy Repair Mortar","description":"\u003cp data-start=\"443\" data-end=\"611\"\u003e\u003cstrong data-start=\"443\" data-end=\"474\"\u003eWatco Concrex® Carbon Fibre\u003c\/strong\u003e is an ultra-strong, heavy-duty repair mortar designed for \u003cstrong data-start=\"533\" data-end=\"610\"\u003elong-lasting concrete repairs in high traffic and industrial environments\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp data-start=\"613\" data-end=\"929\"\u003eReinforced with \u003cstrong data-start=\"629\" data-end=\"667\"\u003ecarbon fibre and ceramic additives\u003c\/strong\u003e, this epoxy-based system delivers exceptional strength, durability and resistance to impact, abrasion and chemicals. Unlike traditional cement-based repairs, Concrex Carbon Fibre creates a \u003cstrong data-start=\"857\" data-end=\"891\"\u003epermanent, granite-hard finish\u003c\/strong\u003e that won’t break down under pressure.\u003c\/p\u003e\n\u003cp data-start=\"931\" data-end=\"1107\"\u003eWith a rapid curing formulation, repairs can be ready for \u003cstrong data-start=\"989\" data-end=\"1029\"\u003elight traffic in as little as 1 hour\u003c\/strong\u003e, making it ideal for busy areas where downtime needs to be kept to a minimum.\u003c\/p\u003e\n\u003cp data-start=\"1109\" data-end=\"1255\"\u003ePerfect for repairing holes, damaged steps, ramps, joints and worn concrete, this versatile system is suitable for both internal and external use.\u003c\/p\u003e\n\u003cp data-start=\"1257\" data-end=\"1564\"\u003e✔️ Stronger than traditional cement repairs\u003cbr data-start=\"1300\" data-end=\"1303\"\u003e✔️ Reinforced with carbon fibre for maximum durability\u003cbr data-start=\"1357\" data-end=\"1360\"\u003e✔️ Ready for traffic in as little as 1 hour\u003cbr data-start=\"1403\" data-end=\"1406\"\u003e✔️ Long-lasting, impact and abrasion resistant\u003cbr data-start=\"1452\" data-end=\"1455\"\u003e✔️ Ideal for thin section and feather-edge repairs\u003cbr data-start=\"1505\" data-end=\"1508\"\u003e✔️ Suitable for industrial and heavy-duty environments\u003c\/p\u003e\n\u003cp data-start=\"1257\" data-end=\"1564\"\u003e\u003ciframe width=\"424\" height=\"238\" src=\"https:\/\/www.youtube.com\/embed\/ax35FSCcvtw\" title=\"Watco Concrex Carbon Fibre - Epoxy Repair Mortar\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp data-start=\"3101\" data-end=\"3125\"\u003e\u003cspan role=\"text\"\u003e\u003cstrong data-start=\"3107\" data-end=\"3123\"\u003eLimitations\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-start=\"3127\" data-end=\"3310\"\u003e\n\u003cli data-start=\"3127\" data-end=\"3163\"\u003eDo not apply to \u003cstrong data-start=\"3145\" data-end=\"3161\"\u003ewet surfaces\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"3164\" data-end=\"3215\"\u003eDo not apply thicker than \u003cstrong data-start=\"3192\" data-end=\"3213\"\u003e50mm in one layer\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"3216\" data-end=\"3264\"\u003eNot suitable for temperatures above \u003cstrong data-start=\"3254\" data-end=\"3262\"\u003e60°C\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"3265\" data-end=\"3310\"\u003eMinimum application temperature: \u003cstrong data-start=\"3300\" data-end=\"3308\"\u003e10°C\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-start=\"1571\" data-end=\"1603\"\u003e\u003cspan role=\"text\"\u003e\u003cstrong data-start=\"1577\" data-end=\"1601\"\u003eSurface Preparation\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul data-start=\"1605\" data-end=\"1988\"\u003e\n\u003cli data-start=\"1605\" data-end=\"1669\"\u003eSurfaces must be \u003cstrong data-start=\"1624\" data-end=\"1667\"\u003eclean, dry and free from loose material\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1670\" data-end=\"1736\"\u003eRemove grease, oil and contaminants using a suitable degreaser\u003c\/li\u003e\n\u003cli data-start=\"1737\" data-end=\"1790\"\u003eWire brushing or sweeping is generally sufficient\u003c\/li\u003e\n\u003cli data-start=\"1791\" data-end=\"1853\"\u003eDamp surfaces should be primed with a \u003cstrong data-start=\"1831\" data-end=\"1851\"\u003etack coat primer\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1854\" data-end=\"1988\"\u003eNo primer is usually required due to high resin content, unless on smooth or intricate areas\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-start=\"1995\" data-end=\"2022\"\u003e\u003cspan role=\"text\"\u003e\u003cstrong data-start=\"2001\" data-end=\"2020\"\u003eTechnical Data\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cdiv class=\"TyagGW_tableContainer\"\u003e\n\u003cdiv class=\"group TyagGW_tableWrapper flex flex-col-reverse w-fit\" tabindex=\"-1\"\u003e\n\u003ctable data-start=\"2024\" data-end=\"2516\" class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead data-start=\"2024\" data-end=\"2046\"\u003e\n\u003ctr data-start=\"2024\" data-end=\"2046\"\u003e\n\u003cth data-start=\"2024\" data-end=\"2035\" data-col-size=\"sm\" class=\"\"\u003eProperty\u003c\/th\u003e\n\u003cth data-start=\"2035\" data-end=\"2046\" data-col-size=\"sm\" class=\"\"\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody data-start=\"2069\" data-end=\"2516\"\u003e\n\u003ctr data-start=\"2069\" data-end=\"2107\"\u003e\n\u003ctd data-start=\"2069\" data-end=\"2084\" data-col-size=\"sm\"\u003eProduct Type\u003c\/td\u003e\n\u003ctd data-start=\"2084\" data-end=\"2107\" data-col-size=\"sm\"\u003eEpoxy repair mortar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"2108\" data-end=\"2129\"\u003e\n\u003ctd data-start=\"2108\" data-end=\"2117\" data-col-size=\"sm\"\u003eColour\u003c\/td\u003e\n\u003ctd data-start=\"2117\" data-end=\"2129\" data-col-size=\"sm\"\u003eMid grey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"2130\" data-end=\"2157\"\u003e\n\u003ctd data-start=\"2130\" data-end=\"2143\" data-col-size=\"sm\"\u003ePack Sizes\u003c\/td\u003e\n\u003ctd data-start=\"2143\" data-end=\"2157\" data-col-size=\"sm\"\u003e10kg, 25kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"2158\" data-end=\"2199\"\u003e\n\u003ctd data-start=\"2158\" data-end=\"2169\" data-col-size=\"sm\"\u003eCoverage\u003c\/td\u003e\n\u003ctd data-start=\"2169\" data-end=\"2199\" data-col-size=\"sm\"\u003e10kg = approx. 1.2m² @ 5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"2200\" data-end=\"2238\"\u003e\n\u003ctd data-start=\"2200\" data-end=\"2224\" data-col-size=\"sm\"\u003eApplication Thickness\u003c\/td\u003e\n\u003ctd data-start=\"2224\" data-end=\"2238\" data-col-size=\"sm\"\u003e5mm – 50mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"2239\" data-end=\"2271\"\u003e\n\u003ctd data-start=\"2239\" data-end=\"2254\" data-col-size=\"sm\"\u003eWorking Time\u003c\/td\u003e\n\u003ctd data-start=\"2254\" data-end=\"2271\" data-col-size=\"sm\"\u003e15–30 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"2272\" data-end=\"2313\"\u003e\n\u003ctd data-start=\"2272\" data-end=\"2287\" data-col-size=\"sm\"\u003eInitial Cure\u003c\/td\u003e\n\u003ctd data-start=\"2287\" data-end=\"2313\" data-col-size=\"sm\"\u003e1 hour (light traffic)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"2314\" data-end=\"2361\"\u003e\n\u003ctd data-start=\"2314\" data-end=\"2326\" data-col-size=\"sm\"\u003eFull Cure\u003c\/td\u003e\n\u003ctd data-start=\"2326\" data-end=\"2361\" data-col-size=\"sm\"\u003eApprox. 4 hours (heavy traffic)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"2362\" data-end=\"2401\"\u003e\n\u003ctd data-start=\"2362\" data-end=\"2382\" data-col-size=\"sm\"\u003eApplication Tools\u003c\/td\u003e\n\u003ctd data-start=\"2382\" data-end=\"2401\" data-col-size=\"sm\"\u003eTrowel or float\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"2402\" data-end=\"2451\"\u003e\n\u003ctd data-start=\"2402\" data-end=\"2417\" data-col-size=\"sm\"\u003eSuitable For\u003c\/td\u003e\n\u003ctd data-start=\"2417\" data-end=\"2451\" data-col-size=\"sm\"\u003eConcrete, sand \u0026amp; cement, metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"2452\" data-end=\"2480\"\u003e\n\u003ctd data-start=\"2452\" data-end=\"2472\" data-col-size=\"sm\"\u003eInterior\/Exterior\u003c\/td\u003e\n\u003ctd data-start=\"2472\" data-end=\"2480\" data-col-size=\"sm\"\u003eBoth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"2481\" data-end=\"2516\"\u003e\n\u003ctd data-start=\"2481\" data-end=\"2503\" data-col-size=\"sm\"\u003eChemical Resistance\u003c\/td\u003e\n\u003ctd data-start=\"2503\" data-end=\"2516\" data-col-size=\"sm\"\u003eExcellent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 data-start=\"2523\" data-end=\"2554\"\u003e\n\u003cspan role=\"text\"\u003e\u003cstrong data-start=\"2529\" data-end=\"2552\"\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003ch3 data-start=\"2523\" data-end=\"2554\"\u003e\u003cspan role=\"text\"\u003e\u003cstrong data-start=\"2529\" data-end=\"2552\"\u003eDirections for Use\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003col data-start=\"2556\" data-end=\"2973\"\u003e\n\u003cli data-start=\"2556\" data-end=\"2616\"\u003eEmpty the pre-blended sand\/resin onto a mixing surface.\u003c\/li\u003e\n\u003cli data-start=\"2617\" data-end=\"2688\"\u003eAdd the supplied curing agent and mix thoroughly until consistent.\u003c\/li\u003e\n\u003cli data-start=\"2689\" data-end=\"2736\"\u003eApply immediately using a trowel or float.\u003c\/li\u003e\n\u003cli data-start=\"2737\" data-end=\"2778\"\u003eCompact firmly into the repair area.\u003c\/li\u003e\n\u003cli data-start=\"2779\" data-end=\"2858\"\u003eSmooth and finish using a trowel (wipe with white spirit for best finish).\u003c\/li\u003e\n\u003cli data-start=\"2859\" data-end=\"2903\"\u003eUse within \u003cstrong data-start=\"2873\" data-end=\"2900\"\u003e15–30 minutes of mixing\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli data-start=\"2904\" data-end=\"2973\"\u003eAllow to cure before trafficking (approx. 1 hour for light use).\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp data-start=\"2975\" data-end=\"3094\"\u003eFor deeper repairs (\u0026gt;50mm), apply in layers or use a suitable deep fill product\u003c\/p\u003e\n\u003ch3 data-start=\"3101\" data-end=\"3125\"\u003e\u003cspan role=\"text\"\u003e\u003cstrong data-start=\"3107\" data-end=\"3123\"\u003eLimitations\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul data-start=\"3127\" data-end=\"3310\"\u003e\n\u003cli data-start=\"3127\" data-end=\"3163\"\u003eDo not apply to \u003cstrong data-start=\"3145\" data-end=\"3161\"\u003ewet surfaces\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"3164\" data-end=\"3215\"\u003eDo not apply thicker than \u003cstrong data-start=\"3192\" data-end=\"3213\"\u003e50mm in one layer\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"3216\" data-end=\"3264\"\u003eNot suitable for temperatures above \u003cstrong data-start=\"3254\" data-end=\"3262\"\u003e60°C\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"3265\" data-end=\"3310\"\u003eMinimum application temperature: \u003cstrong data-start=\"3300\" data-end=\"3308\"\u003e10°C\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong data-start=\"3300\" data-end=\"3308\"\u003eData Sheets\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/concrex_carbon_fibre-TDS.pdf?v=1777630922\" target=\"_blank\" title=\"Watco Concrex Carbon Fibre - TDS\" rel=\"noopener\"\u003eWatco Concrex Carbon Fibre - TDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/concrex_carbon_fibre_resin_aggregate_blend_gb.pdf?v=1777630923\" target=\"_blank\" title=\"Watco Concrex Carbon Fibre Resin - MSDS\" rel=\"noopener\"\u003eWatco Concrex Carbon Fibre Resin - MSDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/Concrex_Carbon_Fibre___Curing_Agent_gb.pdf?v=1777630925\" title=\"Watco Concrex Carbon Fibre Curing Agrent - MSDS\"\u003eWatco Concrex Carbon Fibre Curing Agrent - MSDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"10kg","offer_id":55682407825748,"sku":"CXCF10","price":120.25,"currency_code":"GBP","in_stock":true},{"title":"25kg","offer_id":55682407858516,"sku":"CXCF25","price":242.05,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/Watco_Concrex_Carbon_Fibre.webp?v=1777629486"},{"product_id":"watco-bitu-mend-instant-pothole-repair-for-asphalt-concrete","title":"Watco Bitu-Mend – Instant Pothole Repair for Asphalt \u0026 Concrete","description":"\u003cp data-start=\"478\" data-end=\"650\"\u003e\u003cstrong data-start=\"478\" data-end=\"498\"\u003eWatco Bitu-Mend®\u003c\/strong\u003e is a fast, no-fuss solution for repairing potholes in \u003cstrong data-start=\"553\" data-end=\"594\"\u003easphalt, tarmac and concrete surfaces\u003c\/strong\u003e - without the need for specialist tools or contractors.\u003c\/p\u003e\n\u003cp data-start=\"652\" data-end=\"915\"\u003eDesigned for \u003cstrong data-start=\"665\" data-end=\"713\"\u003eroads, car parks, pathways and loading areas\u003c\/strong\u003e, this high-performance bitumen repair compound is supplied ready to use straight from the tub. Simply apply, compact and the surface can be \u003cstrong data-start=\"854\" data-end=\"880\"\u003etrafficked immediately\u003c\/strong\u003e, reducing downtime and disruption.\u003c\/p\u003e\n\u003cp data-start=\"917\" data-end=\"1100\"\u003eUnlike cheaper alternatives that crumble or fail under pressure, Bitu-Mend compacts into a \u003cstrong data-start=\"1008\" data-end=\"1039\"\u003edense, hard-wearing surface\u003c\/strong\u003e capable of withstanding both vehicle and pedestrian traffic.\u003c\/p\u003e\n\u003cp data-start=\"1102\" data-end=\"1237\"\u003eIdeal for quick maintenance jobs or permanent repairs, it’s the go-to solution when you need something that works first time and lasts.\u003c\/p\u003e\n\u003cp data-start=\"1239\" data-end=\"1530\"\u003e✔️ Instant pothole repair – no mixing required\u003cbr data-start=\"1285\" data-end=\"1288\"\u003e✔️ Ready for traffic immediately after application\u003cbr data-start=\"1338\" data-end=\"1341\"\u003e✔️ Strong, compact finish resists wear and crumbling\u003cbr data-start=\"1393\" data-end=\"1396\"\u003e✔️ Suitable for asphalt, tarmac and concrete\u003cbr data-start=\"1440\" data-end=\"1443\"\u003e✔️ Easy application with minimal equipment\u003cbr data-start=\"1485\" data-end=\"1488\"\u003e✔️ \u003cstrong\u003eIncludes primer for improved adhesion\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4 data-start=\"3305\" data-end=\"3350\"\u003e\u003cspan role=\"text\"\u003e\u003cstrong data-start=\"3311\" data-end=\"3350\"\u003eWhere to Use\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h4\u003e\n\u003cul data-start=\"3367\" data-end=\"3533\"\u003e\n\u003cli data-start=\"3367\" data-end=\"3394\"\u003eCar park pothole repair\u003c\/li\u003e\n\u003cli data-start=\"3395\" data-end=\"3424\"\u003eRoad and driveway repairs\u003c\/li\u003e\n\u003cli data-start=\"3425\" data-end=\"3462\"\u003eIndustrial yards and loading bays\u003c\/li\u003e\n\u003cli data-start=\"3463\" data-end=\"3498\"\u003eSchool playgrounds and pathways\u003c\/li\u003e\n\u003cli data-start=\"3499\" data-end=\"3533\"\u003eTarmac and asphalt maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe width=\"1430\" height=\"804\" src=\"https:\/\/www.youtube.com\/embed\/HS-fKKq4_3w\" title=\"How to Repair Potholes in External Asphalt and Concrete with Watco Bitu-Mend\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch3 data-start=\"1537\" data-end=\"1569\"\u003e\u003cspan role=\"text\"\u003e\u003cstrong data-start=\"1543\" data-end=\"1567\"\u003eSurface Preparation\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul data-start=\"1571\" data-end=\"1896\"\u003e\n\u003cli data-start=\"1571\" data-end=\"1627\"\u003eRemove all \u003cstrong data-start=\"1584\" data-end=\"1625\"\u003eloose debris, dust and standing water\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1628\" data-end=\"1688\"\u003eEnsure the area is \u003cstrong data-start=\"1649\" data-end=\"1686\"\u003eclean and free from oil or grease\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1689\" data-end=\"1742\"\u003eWire brushing or sweeping is typically sufficient\u003c\/li\u003e\n\u003cli data-start=\"1743\" data-end=\"1794\"\u003eUse a suitable degreaser for contaminated areas\u003c\/li\u003e\n\u003cli data-start=\"1795\" data-end=\"1896\"\u003eFor damp surfaces, apply a \u003cstrong data-start=\"1824\" data-end=\"1844\"\u003etack coat primer\u003c\/strong\u003e if required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1898\" data-end=\"1957\"\u003eGood preparation ensures a stronger, longer-lasting repair.\u003c\/p\u003e\n\u003ch3 data-start=\"1964\" data-end=\"1991\"\u003e\u003cspan role=\"text\"\u003e\u003cstrong data-start=\"1970\" data-end=\"1989\"\u003eTechnical Data\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cdiv class=\"TyagGW_tableContainer\"\u003e\n\u003cdiv class=\"group TyagGW_tableWrapper flex flex-col-reverse w-fit\" tabindex=\"-1\"\u003e\n\u003ctable data-start=\"1993\" data-end=\"2482\" class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead data-start=\"1993\" data-end=\"2015\"\u003e\n\u003ctr data-start=\"1993\" data-end=\"2015\"\u003e\n\u003cth data-start=\"1993\" data-end=\"2004\" data-col-size=\"sm\" class=\"\"\u003eProperty\u003c\/th\u003e\n\u003cth data-start=\"2004\" data-end=\"2015\" data-col-size=\"sm\" class=\"\"\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody data-start=\"2038\" data-end=\"2482\"\u003e\n\u003ctr data-start=\"2038\" data-end=\"2094\"\u003e\n\u003ctd data-start=\"2038\" data-end=\"2053\" data-col-size=\"sm\"\u003eProduct Type\u003c\/td\u003e\n\u003ctd data-start=\"2053\" data-end=\"2094\" data-col-size=\"sm\"\u003eBitumen-based pothole repair compound\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"2095\" data-end=\"2113\"\u003e\n\u003ctd data-start=\"2095\" data-end=\"2104\" data-col-size=\"sm\"\u003eColour\u003c\/td\u003e\n\u003ctd data-start=\"2104\" data-end=\"2113\" data-col-size=\"sm\"\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"2114\" data-end=\"2134\"\u003e\n\u003ctd data-start=\"2114\" data-end=\"2126\" data-col-size=\"sm\"\u003ePack Size\u003c\/td\u003e\n\u003ctd data-start=\"2126\" data-end=\"2134\" data-col-size=\"sm\"\u003e25kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"2135\" data-end=\"2180\"\u003e\n\u003ctd data-start=\"2135\" data-end=\"2146\" data-col-size=\"sm\"\u003eCoverage\u003c\/td\u003e\n\u003ctd data-start=\"2146\" data-end=\"2180\" data-col-size=\"sm\"\u003eApprox. 0.5m² @ 25mm thickness\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"2181\" data-end=\"2216\"\u003e\n\u003ctd data-start=\"2181\" data-end=\"2201\" data-col-size=\"sm\"\u003eApplication Depth\u003c\/td\u003e\n\u003ctd data-start=\"2201\" data-end=\"2216\" data-col-size=\"sm\"\u003e10mm – 75mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"2217\" data-end=\"2264\"\u003e\n\u003ctd data-start=\"2217\" data-end=\"2231\" data-col-size=\"sm\"\u003eComposition\u003c\/td\u003e\n\u003ctd data-start=\"2231\" data-end=\"2264\" data-col-size=\"sm\"\u003eBitumen binder with aggregate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"2265\" data-end=\"2302\"\u003e\n\u003ctd data-start=\"2265\" data-end=\"2278\" data-col-size=\"sm\"\u003eComponents\u003c\/td\u003e\n\u003ctd data-start=\"2278\" data-end=\"2302\" data-col-size=\"sm\"\u003eSupplied with primer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"2303\" data-end=\"2347\"\u003e\n\u003ctd data-start=\"2303\" data-end=\"2318\" data-col-size=\"sm\"\u003eSuitable For\u003c\/td\u003e\n\u003ctd data-start=\"2318\" data-end=\"2347\" data-col-size=\"sm\"\u003eAsphalt, tarmac, concrete\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"2348\" data-end=\"2386\"\u003e\n\u003ctd data-start=\"2348\" data-end=\"2368\" data-col-size=\"sm\"\u003eApplication Tools\u003c\/td\u003e\n\u003ctd data-start=\"2368\" data-end=\"2386\" data-col-size=\"sm\"\u003eShovel, tamper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"2387\" data-end=\"2415\"\u003e\n\u003ctd data-start=\"2387\" data-end=\"2402\" data-col-size=\"sm\"\u003eTraffic Time\u003c\/td\u003e\n\u003ctd data-start=\"2402\" data-end=\"2415\" data-col-size=\"sm\"\u003eImmediate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"2416\" data-end=\"2444\"\u003e\n\u003ctd data-start=\"2416\" data-end=\"2436\" data-col-size=\"sm\"\u003eInterior\/Exterior\u003c\/td\u003e\n\u003ctd data-start=\"2436\" data-end=\"2444\" data-col-size=\"sm\"\u003eBoth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"2445\" data-end=\"2482\"\u003e\n\u003ctd data-start=\"2445\" data-end=\"2458\" data-col-size=\"sm\"\u003eShelf Life\u003c\/td\u003e\n\u003ctd data-start=\"2458\" data-end=\"2482\" data-col-size=\"sm\"\u003e24 months (unopened)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2 data-start=\"2489\" data-end=\"2520\"\u003e\n\u003cspan role=\"text\"\u003e\u003cstrong data-start=\"2495\" data-end=\"2518\"\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003ch3 data-start=\"2489\" data-end=\"2520\"\u003e\u003cspan role=\"text\"\u003e\u003cstrong data-start=\"2495\" data-end=\"2518\"\u003eDirections for Use\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003col data-start=\"2522\" data-end=\"2906\"\u003e\n\u003cli data-start=\"2522\" data-end=\"2578\"\u003eClear the pothole of all loose material and debris.\u003c\/li\u003e\n\u003cli data-start=\"2579\" data-end=\"2656\"\u003eApply the supplied \u003cstrong data-start=\"2601\" data-end=\"2611\"\u003eprimer\u003c\/strong\u003e to the prepared surface and spread evenly.\u003c\/li\u003e\n\u003cli data-start=\"2657\" data-end=\"2730\"\u003ePour or shovel Bitu-Mend into the repair area, slightly overfilling.\u003c\/li\u003e\n\u003cli data-start=\"2731\" data-end=\"2790\"\u003eCompact firmly using a tamper or the back of a shovel.\u003c\/li\u003e\n\u003cli data-start=\"2791\" data-end=\"2835\"\u003eLevel off to match surrounding surface.\u003c\/li\u003e\n\u003cli data-start=\"2836\" data-end=\"2906\"\u003eThe repair can be \u003cstrong data-start=\"2857\" data-end=\"2884\"\u003edriven over immediately\u003c\/strong\u003e after installation.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp data-start=\"2908\" data-end=\"3045\"\u003eThe material is applied soft and flexible, gradually hardening over time to form a durable repair\u003c\/p\u003e\n\u003ch3 data-start=\"2908\" data-end=\"3045\"\u003eData Sheets\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/uk_tds_bitu_mend_01_23.pdf?v=1777634514\" title=\"Watco Bitu-Mend – TDS\" rel=\"noopener\" target=\"_blank\"\u003eWatco Bitu-Mend – TDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/bitu_mend_MSDS.pdf?v=1777634515\" title=\"Watco Bitu-Mend – MSDS\" rel=\"noopener\" target=\"_blank\"\u003eWatco Bitu-Mend – MSDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"25kg + Primer","offer_id":55682825453908,"sku":"BITU25","price":71.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/Watco_Bitu-Mend.webp?v=1777636179"},{"product_id":"watco-4-hour-epoxy-primer","title":"Watco 4 Hour Epoxy Primer","description":"\u003cp\u003e\u003cstrong\u003eWatco 4 Hour Epoxy Primer\u003c\/strong\u003e prepares porous concrete floors for an epoxy coating. Its penetrating, two-part formulation reduces suction, binds friable surfaces and helps prevent air bubbles in the finish. Supplied with resin and curing agent, it allows priming and coating within the same working day.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFast-curing epoxy primer for internal floors.\u003c\/li\u003e\n\u003cli\u003eVirtually solvent free, high-solids formulation.\u003c\/li\u003e\n\u003cli\u003eStrengthens weak surface material before painting.\u003c\/li\u003e\n\u003cli\u003eClear finish; may darken some substrates slightly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePack size\u003c\/th\u003e\n\u003ctd\u003e5L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuitable substrates\u003c\/th\u003e\n\u003ctd\u003eBare porous concrete, sand and cement screeds, bricks and blockwork\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum temperature\u003c\/th\u003e\n\u003ctd\u003eAir: 15°C; floor: 10°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePot life\u003c\/th\u003e\n\u003ctd\u003eUp to 20 minutes at 20°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConcrete moisture\u003c\/th\u003e\n\u003ctd\u003eBelow 75% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCoverage\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSmooth concrete: approximately 20m² per 5L (4m²\/L).\u003c\/li\u003e\n\u003cli\u003eAcid-etched concrete: approximately 15m² per 5L.\u003c\/li\u003e\n\u003cli\u003eShot-blasted or open-textured concrete: approximately 12.5m² per 5L.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePorosity affects consumption. The calculator uses the smooth-concrete rate; allow more material for absorbent surfaces.\u003c\/p\u003e\n\u003ch3\u003eDirections for Use\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eRemove loose material, contamination and laitance. Clean and degrease as required, rinse and let the floor dry thoroughly. Allow new concrete to dry for approximately eight weeks.\u003c\/li\u003e\n\u003cli\u003eStir both components, combine the complete pack and mix to a uniform consistency. Immediately transfer to a tray or scuttle: mixed primer left in the tin can become dangerously hot.\u003c\/li\u003e\n\u003cli\u003eWork one coat into the surface with a medium-pile roller; use a brush at edges. Provide good ventilation.\u003c\/li\u003e\n\u003cli\u003eOvercoat when touch dry, generally after 4–8 hours, and within 48 hours. Lightly abrade if the interval is exceeded.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eLimitations\u003c\/h3\u003e\u003cp\u003eFor indoor, porous substrates only. Apply to a dry surface, following the technical sheet. Store at 15–25°C for at least eight hours before use and protect from frost. Unopened shelf life: 24 months. Read both safety sheets before handling.\u003c\/p\u003e\n\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat surfaces can I prime?\u003c\/strong\u003e\u003cbr\u003eUse on bare, porous concrete, sand and cement screeds, bricks and blockwork indoors. It is unsuitable for non-porous surfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much will a 5L pack cover?\u003c\/strong\u003e\u003cbr\u003eAllow approximately 20m² on smooth concrete, 15m² on acid-etched concrete or 12.5m² on shot-blasted\/open-textured concrete. Actual coverage depends on porosity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen can I apply the floor coating?\u003c\/strong\u003e\u003cbr\u003eThe product is designed for same-day priming and coating. Follow the technical sheet: overcoat when touch dry, generally 4–8 hours, and within 48 hours. Lightly abrade if this window is exceeded.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I apply it to damp concrete?\u003c\/strong\u003e\u003cbr\u003eFollow the technical sheet and apply to a dry surface. Concrete moisture must be below 75% RH. The primer relies on penetration into the substrate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long can I use the mixed primer?\u003c\/strong\u003e\u003cbr\u003eUse immediately after mixing and transfer into a paint tray or scuttle. Pot life is up to 20 minutes at 20°C. Do not leave mixed material in the mixing tin, where it can heat rapidly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat temperatures are needed?\u003c\/strong\u003e\u003cbr\u003eThe technical sheet specifies a minimum air temperature of 15°C and floor temperature of 10°C. Provide good ventilation.\u003c\/p\u003e\n\u003ch3\u003eData Sheets\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-4-hour-epoxy-primer-technical-data-sheet.pdf?v=1793708387\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-4-hour-epoxy-primer-sds-curing-agent-gb.pdf?v=1793708387\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Curing Agent (GB)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-4-hour-epoxy-primer-sds-resin-gb.pdf?v=1793708387\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Resin (GB)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-4-hour-epoxy-primer-sds-curing-agent-gbni.pdf?v=1793708387\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Curing Agent (GBNI)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-4-hour-epoxy-primer-sds-resin-gbni.pdf?v=1793708387\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Resin (GBNI)\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"5L","offer_id":58106520469844,"sku":"4EPS5","price":128.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-4-hour-epoxy-primer-5l.jpg?v=1793708354"},{"product_id":"watco-concrex-deep-fill","title":"Watco Concrex Deep Fill","description":"\u003cp\u003e\u003cstrong\u003eWatco Concrex Deep Fill\u003c\/strong\u003e is a heavy-duty \u003cstrong\u003eepoxy concrete repair mortar\u003c\/strong\u003e for deep holes, damaged floor edges and eroded concrete in busy working areas. The two-part formulation combines epoxy resin with sand and granite aggregate, providing an economical way to rebuild deeper sections of concrete before returning the area to use.\u003c\/p\u003e\n\u003cp\u003eDesigned for repairs between \u003cstrong\u003e15mm and 100mm deep in a single layer\u003c\/strong\u003e, Concrex Deep Fill is suitable for internal and external maintenance. Use it to fill holes in concrete floors, make up uneven floor levels, form ramps and repair damaged sections around steps or floor joints. It is particularly useful where a shallow repair compound would need several applications to build up the required depth.\u003c\/p\u003e\n\u003cp\u003eThe granite-reinforced mortar can be left exposed as a coarse-textured wearing surface. Where a smoother finish is required, leave the repair 5mm below the surrounding floor and finish with \u003ca href=\"\/products\/watco-concrex-carbon-fibre-epoxy-repair-mortar\"\u003eWatco Concrex Carbon Fibre\u003c\/a\u003e. This makes Deep Fill a practical base layer for larger, deeper repairs while reserving the finishing mortar for the surface.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeep concrete floor repairs:\u003c\/strong\u003e fill substantial holes and rebuild worn or uneven areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy traffic applications:\u003c\/strong\u003e an epoxy mortar designed for demanding repair work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndoor and outdoor use:\u003c\/strong\u003e suitable for concrete, sand and cement, and prepared metal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible finishing options:\u003c\/strong\u003e use as a wearing surface or beneath a smoother Concrex layer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\u003cp\u003eRemove loose and crumbling material so that the repair can bond to a sound surface. Sweep or wire-brush the area and remove oil and grease with a suitable degreaser. Start with clean, dry concrete; prime smooth or damp areas with \u003ca href=\"\/products\/watco-tack-coat\"\u003eWatco Tack Coat\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize \/ Colour\u003c\/th\u003e\n\u003ctd\u003e25kg \/ Grey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eComposition\u003c\/th\u003e\n\u003ctd\u003eSand, granite and epoxy resin with separate curing agent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuitable surfaces\u003c\/th\u003e\n\u003ctd\u003eConcrete, sand and cement, metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication depth\u003c\/th\u003e\n\u003ctd\u003e15–100mm per layer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApproximately 0.5m² per pack at 30mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking time\u003c\/th\u003e\n\u003ctd\u003e30–60 minutes, temperature dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLight traffic \/ overlaying\u003c\/th\u003e\n\u003ctd\u003e5–6 hours at 15–20°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum application temperature\u003c\/th\u003e\n\u003ctd\u003e10°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eDirections for Use\u003c\/h3\u003e\u003cp\u003eShake the curing agent. Tip the pre-blended aggregate\/resin onto a board or tray; mix thoroughly with the curing agent until evenly grey. Do not mix in the bucket. Compact into the repair with a trowel and finish with a float. Wipe the tool with white spirit to reduce drag.\u003c\/p\u003e\n\u003ch3\u003eLimitations\u003c\/h3\u003e\u003cp\u003eAvoid wet surfaces and temperatures above 60°C in service. Do not exceed 100mm per layer. Store frost-free at 10–30°C; unopened shelf life is 12 months. Read the safety sheets before use.\u003c\/p\u003e\n\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow deep can I apply Concrex Deep Fill?\u003c\/strong\u003e\u003cbr\u003eApply 15–100mm in one layer. For deeper repairs, build up layers with five hours between applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat area does a pack repair?\u003c\/strong\u003e\u003cbr\u003eA 25kg pack covers approximately 0.5m² at 30mm depth. Coverage reduces as repair depth increases.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need Tack Coat?\u003c\/strong\u003e\u003cbr\u003eUse Tack Coat on smooth or damp substrates. Ordinary repairs to rough, dry concrete do not usually need primer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it give a smooth finish?\u003c\/strong\u003e\u003cbr\u003eDeep Fill leaves a coarse wearing surface. For a smoother finish, stop 5mm below floor level and overlay with Concrex Carbon Fibre.\u003c\/p\u003e\n\u003ch3\u003eData Sheets\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-concrex-deep-fill-tds.pdf?v=1793717073\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-concrex-deep-fill-sds-curing-agent-gb.pdf?v=1793717074\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Curing Agent (GB)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-concrex-deep-fill-sds-resin-gb.pdf?v=1793717073\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Resin (GB)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-concrex-deep-fill-sds-curing-agent-gbni.pdf?v=1793717073\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Curing Agent (GBNI)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-concrex-deep-fill-sds-resin-gbni.pdf?v=1793717073\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Resin (GBNI)\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"25kg","offer_id":58108201599316,"sku":"CXDF25","price":261.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-concrex-deep-fill-1.jpg?v=1793717039"},{"product_id":"watco-tack-coat","title":"Watco Tack Coat","description":"\u003cp\u003e\u003cstrong\u003eWatco Tack Coat\u003c\/strong\u003e is a \u003cstrong\u003etwo-part epoxy adhesive primer\u003c\/strong\u003e for use with the Watco Concrex concrete repair range. Its 100% solids epoxy formulation creates a bonding layer between the prepared substrate and repair mortar, helping achieve adhesion on shallow repairs, intricate edges and surfaces where additional bonding is needed.\u003c\/p\u003e\n\u003cp\u003eUse this \u003cstrong\u003econcrete repair primer\u003c\/strong\u003e before screeding with Concrex or applying Concrex Vertical. It is suitable for work on floors, steps, ramps and walls, with internal and external applications on concrete, metal and masonry. For repairs using \u003ca href=\"\/products\/watco-concrex-deep-fill\"\u003eWatco Concrex Deep Fill\u003c\/a\u003e, Tack Coat is recommended on smooth or damp substrates where the mortar needs an adhesive bonding coat.\u003c\/p\u003e\n\u003cp\u003eTack Coat is applied sparingly with a brush or roller, making it straightforward to work into edges and smaller repair areas. The important step is to place the repair mortar \u003cstrong\u003ewhile the primer is still tacky\u003c\/strong\u003e: allow it to develop its tack, then overlay before it sets to a hard film. This is a bonding primer for the repair system, rather than a finished floor coating.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEpoxy bonding primer:\u003c\/strong\u003e supports adhesion for Concrex mortar and screeding work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow and detailed repairs:\u003c\/strong\u003e useful around edges and intricate areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo coverage options:\u003c\/strong\u003e choose the pack for approximately 1m² or 6m² of prepared surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrush or roller application:\u003c\/strong\u003e apply one thin coat and overlay at the tacky stage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\u003cp\u003eGood surface preparation is essential for an effective bond between the substrate, primer and repair mortar. Remove dust, loose material and poorly bonded paint; roughen sound coatings to provide a key. Wire-brush or grind rust from metal, degrease and allow it to dry. Prime prepared metal promptly. Remove ice from the substrate.\u003c\/p\u003e\n\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFormulation\u003c\/th\u003e\n\u003ctd\u003e100% solids epoxy; resin and curing agent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack coverage\u003c\/th\u003e\n\u003ctd\u003e0.34L: approximately 1m²; 2L: approximately 6m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuitable surfaces\u003c\/th\u003e\n\u003ctd\u003eConcrete, metal and masonry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ Tools\u003c\/th\u003e\n\u003ctd\u003eOne thin coat \/ brush or roller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePot life\u003c\/th\u003e\n\u003ctd\u003eMaximum 20 minutes at 20°C in a shallow tray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReady to overlay\u003c\/th\u003e\n\u003ctd\u003eApproximately 60 minutes at 15–20°C; three hours at 5°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e24 months, unopened\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eDirections for Use\u003c\/h3\u003e\u003cp\u003eEmpty the smaller tin into the larger and mix thoroughly with a wide blade. Decant the larger pack into a shallow tray and use immediately. Mixed material left in the tin can heat rapidly. Apply sparingly, then place Concrex mortar while the primer remains tacky.\u003c\/p\u003e\n\u003ch3\u003eLimitations\u003c\/h3\u003e\u003cp\u003eDo not allow the bonding coat to harden before overlaying. Protect stored packs from frost and condition at 15–20°C for eight hours before use. Read both safety sheets.\u003c\/p\u003e\n\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhich pack should I choose?\u003c\/strong\u003e\u003cbr\u003eThe 0.34L pack treats approximately 1m²; the 2L pack treats approximately 6m². Coverage varies with the surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should I apply the repair mortar?\u003c\/strong\u003e\u003cbr\u003eApply while Tack Coat is tacky, before it hardens: typically after about 60 minutes at 15–20°C, or three hours at 5°C.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it go over paint?\u003c\/strong\u003e\u003cbr\u003eYes, provided the paint is sound. Remove loose paint and roughen firmly bonded coatings first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat if the primer has hardened?\u003c\/strong\u003e\u003cbr\u003eBrush on a fresh coat, preferably within 24 hours, then apply the mortar while tacky. Follow the technical sheet.\u003c\/p\u003e\n\u003ch3\u003eData Sheets\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-tack-coat-tds.pdf?v=1793717073\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-tack-coat-sds-curing-agent-gb.pdf?v=1793717073\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Curing Agent (GB)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-tack-coat-sds-resin-gb.pdf?v=1793717073\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Resin (GB)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-tack-coat-sds-curing-agent-gbni.pdf?v=1793717074\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Curing Agent (GBNI)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-tack-coat-sds-resin-gbni.pdf?v=1793717073\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Resin (GBNI)\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"0.34L (1m²)","offer_id":58108202844500,"sku":"TACKCDC1","price":31.0,"currency_code":"GBP","in_stock":true},{"title":"2L (6m²)","offer_id":58108202877268,"sku":"TACKCDC6","price":88.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-tack-coat-1.jpg?v=1793717053"},{"product_id":"watco-flowpatch-deep-fill","title":"Watco Flowpatch Deep Fill","description":"\u003cp\u003e\u003cstrong\u003eWatco Flowpatch Deep Fill\u003c\/strong\u003e is a fibre-reinforced, \u003cstrong\u003epourable concrete repair compound\u003c\/strong\u003e for deep holes in level floors. Add water, mix and pour to rebuild a contained repair without having to work a stiff mortar into every corner. Its fast-setting cement-based formulation is suited to maintenance where a damaged floor needs to be returned to service promptly.\u003c\/p\u003e\n\u003cp\u003eUse this deep hole repair filler indoors or outdoors at depths from \u003cstrong\u003e10mm to 200mm\u003c\/strong\u003e. It is designed for heavily trafficked concrete floors and can accept forklift traffic in approximately two hours at normal ambient temperatures. That makes it a useful option when planning local floor repairs around access and working schedules.\u003c\/p\u003e\n\u003cp\u003eFlowpatch Deep Fill can be applied to damp concrete once standing water and contamination have been removed. No primer is required. The mixed material flows into the repair and levels with minimal trowelling, leaving a grey finish. The short working time makes preparation especially important: have the hole ready, measure the water and mix beside the repair.\u003c\/p\u003e\n\u003cp\u003eChoose the repair compound to suit the floor shape. For ramps, steps or exposed edges, a trowel-applied \u003ca href=\"\/products\/watco-concrex-carbon-fibre-epoxy-repair-mortar\"\u003eWatco Concrex mortar\u003c\/a\u003e is more appropriate. For shallower patching, see \u003ca href=\"\/products\/watco-flowpatch\"\u003eWatco Flowpatch\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\u003cp\u003eRemove oil, dirt and loose concrete. Wire-brush where possible and cut edges to depth in heavy-wear areas, rather than leaving a thin feather edge. The surface may be damp but must not be wet.\u003c\/p\u003e\n\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize \/ Colour\u003c\/th\u003e\n\u003ctd\u003e25kg \/ Grey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eComposition\u003c\/th\u003e\n\u003ctd\u003eFibre-reinforced cement and polymer powder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication depth\u003c\/th\u003e\n\u003ctd\u003e10–200mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApproximately 0.25m² at 50mm per pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking time\u003c\/th\u003e\n\u003ctd\u003e5–10 minutes at 20°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTraffic\u003c\/th\u003e\n\u003ctd\u003eFoot traffic: 30–60 minutes; forklifts: approximately 2 hours at ambient temperatures\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication temperature\u003c\/th\u003e\n\u003ctd\u003e5°C and above recommended; cold conditions extend curing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e12 months, unopened\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eDirections for Use\u003c\/h3\u003e\u003cp\u003eMeasure 200ml of water per kilogram of powder. Put water in the mixing container, add powder gradually and stir to a smooth, pourable slurry. Pour immediately and finish with minimal trowelling. Mix only what can be placed within the working time. Wash tools before the material sets.\u003c\/p\u003e\n\u003ch3\u003eLimitations\u003c\/h3\u003e\u003cp\u003eDo not add excess water or re-stir material that has started to harden. Avoid slopes, uncontained edges and wet substrates. Store dry and protect from freezing. Read the safety sheets before handling.\u003c\/p\u003e\n\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow deep can Flowpatch Deep Fill be applied?\u003c\/strong\u003e\u003cbr\u003eUse it for repairs 10–200mm deep on level concrete. Its pourable consistency needs a contained repair area.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a pack cover?\u003c\/strong\u003e\u003cbr\u003eA 25kg pack covers approximately 0.25m² at 50mm depth, equivalent to 0.5m² at 25mm. Allow more material for deeper holes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen can forklifts use the repair?\u003c\/strong\u003e\u003cbr\u003eApproximately two hours at normal ambient temperatures. Cold conditions slow curing; allow around 24 hours at 5°C.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it repair steps or ramps?\u003c\/strong\u003e\u003cbr\u003eUse a trowel-applied Concrex mortar for slopes, steps and exposed edges. Flowpatch Deep Fill is intended for level, contained holes.\u003c\/p\u003e\u003ch3\u003eData Sheets\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-flowpatch-deep-fill-tds.pdf?v=1793799028\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-flowpatch-deep-fill-sds-gb.pdf?v=1793799028\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet (GB)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-flowpatch-deep-fill-sds-gbni.pdf?v=1793799028\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet (GBNI)\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"25kg","offer_id":58131924713812,"sku":"XFPDF25NC","price":132.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-flow-product-1.jpg?v=1793798984"},{"product_id":"watco-concrex-deep-fill-rapid","title":"Watco Concrex Deep Fill Rapid","description":"\u003cp\u003e\u003cstrong\u003eWatco Concrex Deep Fill Rapid\u003c\/strong\u003e is a fast-curing \u003cstrong\u003eepoxy concrete repair mortar\u003c\/strong\u003e for deeper holes, damaged floor areas and uneven concrete. It combines the depth capability of the Deep Fill range with a quicker return to light traffic, helping reduce the time a repair area has to stay out of use.\u003c\/p\u003e\n\u003cp\u003eThe two-part mortar is applied at \u003cstrong\u003e15mm to 100mm in one layer\u003c\/strong\u003e. Use it for local repairs to concrete floors, building up floor levels, forming ramps and rebuilding eroded areas. Its trowel-applied consistency allows the mortar to be compacted and shaped where a pourable filler would not stay in place.\u003c\/p\u003e\n\u003cp\u003eAt 15–20°C, allow approximately \u003cstrong\u003ethree hours before light traffic or overlaying\u003c\/strong\u003e. This is the Rapid grade: select it when the repair schedule needs a faster turnaround than \u003ca href=\"\/products\/watco-concrex-deep-fill\"\u003estandard Concrex Deep Fill\u003c\/a\u003e. Both internal and external repairs are supported, with the surface and temperature prepared in accordance with the technical sheet.\u003c\/p\u003e\n\u003cp\u003eThe aggregate and resin are supplied pre-blended with a separate curing agent. Thorough mixing and firm compaction are important for a consistent repair. For a smoother finished surface, the Deep Fill range can be used beneath a finishing layer of \u003ca href=\"\/products\/watco-concrex-carbon-fibre-epoxy-repair-mortar\"\u003eConcrex Carbon Fibre\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\u003cp\u003eRemove loose material, dirt, grease and oil. Start with a sound, clean, dry surface. \u003ca href=\"\/products\/watco-tack-coat\"\u003eWatco Tack Coat\u003c\/a\u003e is recommended on smooth or damp substrates; normal patch repairs in rough, dry concrete do not usually need primer.\u003c\/p\u003e\n\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize \/ Colour\u003c\/th\u003e\n\u003ctd\u003e25kg \/ Grey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eComposition\u003c\/th\u003e\n\u003ctd\u003eTwo-part epoxy resin mortar with aggregate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuitable surfaces\u003c\/th\u003e\n\u003ctd\u003eConcrete, sand and cement, prepared metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRepair depth\u003c\/th\u003e\n\u003ctd\u003e15–100mm per layer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApproximately 0.5m² per pack at 30mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking time\u003c\/th\u003e\n\u003ctd\u003e30–60 minutes, temperature dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLight traffic \/ Overlaying\u003c\/th\u003e\n\u003ctd\u003eApproximately 3 hours at 15–20°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum application temperature\u003c\/th\u003e\n\u003ctd\u003e10°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e12 months, unopened\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eDirections for Use\u003c\/h3\u003e\u003cp\u003eShake the curing agent and tip the aggregate\/resin onto a board or tray. Add the curing agent and mix thoroughly until evenly grey. Do not mix in the plastic bucket. Trowel firmly into the repair, compact and finish with a float. Wiping the tool with white spirit helps reduce drag.\u003c\/p\u003e\n\u003ch3\u003eLimitations\u003c\/h3\u003e\u003cp\u003eDo not apply to wet surfaces or exceed 100mm in one layer. Avoid service temperatures above 60°C. Store at 10–30°C and protect from freezing. Read the technical and safety sheets before work.\u003c\/p\u003e\n\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow does Rapid differ from standard Deep Fill?\u003c\/strong\u003e\u003cbr\u003eRapid is ready for light traffic or overlaying after approximately three hours at 15–20°C, compared with five to six hours for standard Deep Fill.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat repair depth is suitable?\u003c\/strong\u003e\u003cbr\u003eApply 15–100mm per layer. It is a deep repair mortar rather than a thin finishing screed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a primer necessary?\u003c\/strong\u003e\u003cbr\u003eOrdinary repairs to rough, dry concrete usually need none. Use Watco Tack Coat on smooth or damp surfaces and follow the technical sheet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat coverage should I allow?\u003c\/strong\u003e\u003cbr\u003eApproximately 0.5m² per 25kg at 30mm. Actual consumption depends on the repair's depth and shape.\u003c\/p\u003e\u003ch3\u003eData Sheets\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-concrex-deep-fill-tds.pdf?v=1793717073\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-concrex-deep-fill-rapid-sds-curing-agent-gb.pdf?v=1793799028\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Curing Agent (GB)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-concrex-deep-fill-rapid-sds-resin-gb.pdf?v=1793799028\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Resin (GB)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-concrex-deep-fill-rapid-sds-curing-agent-gbni.pdf?v=1793799029\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Curing Agent (GBNI)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-concrex-deep-fill-rapid-sds-resin-gbni.pdf?v=1793799029\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Resin (GBNI)\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"25kg","offer_id":58131927859540,"sku":"CXDFR25","price":267.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-rapid-product-3.jpg?v=1793798995"},{"product_id":"watco-tack-coat-sub-zero","title":"Watco Tack Coat Sub Zero","description":"\u003cp\u003e\u003cstrong\u003eWatco Tack Coat Sub Zero\u003c\/strong\u003e is a two-part \u003cstrong\u003epolyaspartic adhesive primer\u003c\/strong\u003e for low-temperature concrete repairs. Designed for use with Concrex Sub Zero, it provides a bonding coat for essential maintenance when cold conditions make a standard repair system unsuitable.\u003c\/p\u003e\n\u003cp\u003eUse this cold-weather bonding primer for prepared floors, walls, ramps and steps, indoors or outdoors. It is suited to repair work in cold environments, including chiller rooms, and can be applied to a dry floor above \u003cstrong\u003e−20°C\u003c\/strong\u003e. Its low-temperature application range gives maintenance teams a way to plan repairs through winter and in refrigerated areas.\u003c\/p\u003e\n\u003cp\u003eUnlike the original Tack Coat, the Sub Zero version uses a polyaspartic resin formulation. Select it as part of the appropriate cold-weather repair system and follow the instructions for that version. \u003cstrong\u003eConcrex Sub Zero can be placed directly onto the wet primer\u003c\/strong\u003e, so there is no need to wait for the initial tack to develop before applying that mortar.\u003c\/p\u003e\n\u003cp\u003eThe primer must remain wet or tacky while the repair is completed. It is supplied as resin and curing agent for mixing immediately before use, then applied sparingly with a brush. At very low temperatures it becomes thicker, which can reduce the area covered. Allow for the actual surface texture and site conditions when planning the quantity needed.\u003c\/p\u003e\n\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\u003cp\u003eRemove contamination, loose material and ice. Degrease and allow the substrate to dry. Where working over an existing coating, remove poorly bonded paint and roughen sound paint to provide a key. Suitable substrates include concrete, render, stone, sand and cement.\u003c\/p\u003e\n\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e750ml\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eComposition\u003c\/th\u003e\n\u003ctd\u003eTwo-part polyaspartic resin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior and exterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApproximately 3m² per pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoats \/ Tools\u003c\/th\u003e\n\u003ctd\u003eOne thin coat \/ brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication range\u003c\/th\u003e\n\u003ctd\u003eDry floor above −20°C; application up to 30°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking life\u003c\/th\u003e\n\u003ctd\u003e20–25 minutes at 15°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTacky window\u003c\/th\u003e\n\u003ctd\u003eAt least 3 hours between −20°C and 10°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e12 months, unopened\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eDirections for Use\u003c\/h3\u003e\u003cp\u003eCondition and mix between 10–25°C. Stir each tin, combine the full contents and scrape the sides to include all material. Mix to an even consistency, one pack at a time. Apply sparingly. Place Concrex Sub Zero directly on the wet primer and complete the repair before the bonding coat hardens.\u003c\/p\u003e\n\u003ch3\u003eLimitations\u003c\/h3\u003e\u003cp\u003eUse on a dry, ice-free surface. Do not allow the primer to form a hard film before overlaying. Protect stored packs from frost. Read the Sub Zero sections of the technical sheet and both safety sheets before use.\u003c\/p\u003e\n\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow cold can the application surface be?\u003c\/strong\u003e\u003cbr\u003eThe technical sheet specifies a dry floor above −20°C and application up to 30°C. Remove ice and prepare the substrate first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMust I wait before adding Concrex Sub Zero?\u003c\/strong\u003e\u003cbr\u003eNo. Concrex Sub Zero can be applied directly to the wet primer. Complete the repair before the primer hardens.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much area will a pack prime?\u003c\/strong\u003e\u003cbr\u003eApproximately 3m² per 750ml pack. The primer thickens below 0°C, which may reduce coverage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does it remain tacky?\u003c\/strong\u003e\u003cbr\u003eAt least three hours between −20°C and 10°C, according to the technical sheet. Plan the repair around the actual site conditions.\u003c\/p\u003e\u003ch3\u003eData Sheets\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-tack-coat-tds.pdf?v=1793717073\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-tack-coat-sub-zero-sds-curing-agent-gb.pdf?v=1793799029\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Curing Agent (GB)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-tack-coat-sub-zero-sds-resin-gb.pdf?v=1793799029\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Resin (GB)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-tack-coat-sub-zero-sds-curing-agent-gbni.pdf?v=1793799029\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Curing Agent (GBNI)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-tack-coat-sub-zero-sds-resin-gbni.pdf?v=1793799029\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Resin (GBNI)\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"750ml","offer_id":58131929563476,"sku":"TACKSZ750","price":39.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-subzero-product-4.png?v=1793799001"},{"product_id":"watco-concrex-cold-set-deep-fill","title":"Watco Concrex Cold Set Deep Fill","description":"\u003cp\u003e\u003cstrong\u003eWatco Concrex Cold Set Deep Fill\u003c\/strong\u003e is a heavy-duty \u003cstrong\u003eepoxy concrete repair mortar\u003c\/strong\u003e for deeper holes when temperatures are too low for a standard repair grade. Its cold-setting formulation allows essential floor maintenance in conditions down to 0°C, helping you plan repairs through winter and in colder working areas.\u003c\/p\u003e\u003cp\u003eThe larger aggregate and lower resin content make this a practical base material for deep repairs. Apply from 15mm to 100mm in one layer to rebuild damaged concrete, make up uneven areas or repair sections around floor joints and steps. The mortar is trowelled firmly into position, so you can compact it against the prepared edges rather than relying on a flowing filler.\u003c\/p\u003e\u003cp\u003eCold Set Deep Fill is suitable for internal and external repairs to concrete, sand and cement, and prepared metal. Its grey finish has a coarser texture than standard Concrex Cold Set. For a smoother surface, the technical sheet recommends using the deep-fill grade as a base and leaving space for a 5mm finishing layer of Concrex Cold Set.\u003c\/p\u003e\u003cp\u003eChoose this version for cold conditions between 0°C and 10°C. For warmer applications, compare \u003ca href=\"\/products\/watco-concrex-deep-fill\"\u003eConcrex Deep Fill\u003c\/a\u003e; for a faster return to use in suitable temperatures, see \u003ca href=\"\/products\/watco-concrex-deep-fill-rapid\"\u003eConcrex Deep Fill Rapid\u003c\/a\u003e. Select the grade around the temperature of the repair area and the time available before traffic returns.\u003c\/p\u003e\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\u003cp\u003eRemove loose concrete, oil and grease. Start with a clean, dry and sound surface. Where the surface is damp or additional adhesion is needed, follow the technical sheet and use Tack Coat Sub Zero.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize \/ Colour\u003c\/th\u003e\n\u003ctd\u003e25kg \/ Grey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eComposition\u003c\/th\u003e\n\u003ctd\u003eEpoxy resin mortar with larger aggregate and separate curing agent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication depth\u003c\/th\u003e\n\u003ctd\u003e15–100mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApproximately 0.5m² per pack at 30mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking time\u003c\/th\u003e\n\u003ctd\u003eUse within 30 minutes; temperature dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTraffic\u003c\/th\u003e\n\u003ctd\u003eAt 0°C: light traffic 24 hours; heavy traffic 48 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e12 months, unopened\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eDirections for Use\u003c\/h3\u003e\u003cp\u003eShake the curing agent and place the pre-blended aggregate\/resin on a board or mixing tray. Do not mix inside the plastic bucket. Add the curing agent and mix thoroughly to an even grey consistency. Trowel firmly into the prepared repair and finish with a float. Wipe the tool with white spirit to reduce drag.\u003c\/p\u003e\u003ch3\u003eLimitations\u003c\/h3\u003e\u003cp\u003eDo not apply below 0°C or to wet surfaces. Do not feather-edge this deep-fill grade or exceed 100mm in one layer. Avoid service temperatures above 60°C. Store frost-free at 10–30°C. Read the technical and safety sheets before use.\u003c\/p\u003e\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I use it in cold weather?\u003c\/strong\u003e\u003cbr\u003eYes. The Cold Set grade cures down to 0°C. Allow approximately 24 hours for light traffic and 48 hours for heavy traffic at 0°C.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow deep can I fill in one layer?\u003c\/strong\u003e\u003cbr\u003eApply 15–100mm in one layer. Deep Fill Cold Set must not be feather-edged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much will a pack cover?\u003c\/strong\u003e\u003cbr\u003eApproximately 0.5m² per 25kg at 30mm depth. Actual consumption depends on the depth and shape of the repair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it need a primer?\u003c\/strong\u003e\u003cbr\u003eRough, dry patch repairs usually need none. The technical sheet recommends Tack Coat Sub Zero where priming is needed, including damp surfaces.\u003c\/p\u003e\u003ch3\u003eData Sheets\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-cold-repair-1.pdf?v=1793966847\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-cold-repair-2.pdf?v=1793966847\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Curing Agent (GB)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-cold-repair-3.pdf?v=1793966847\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Resin (GB)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-cold-repair-4.pdf?v=1793966847\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Curing Agent (GBNI)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-cold-repair-5.pdf?v=1793966847\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Resin (GBNI)\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"25kg","offer_id":58181201920340,"sku":"CXCSDF25","price":267.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-cold-repair-1.jpg?v=1793966790"},{"product_id":"watco-bitu-mend-deep-fill","title":"Watco Bitu-Mend Deep Fill","description":"\u003cp\u003e\u003cstrong\u003eWatco Bitu-Mend Deep Fill\u003c\/strong\u003e is an \u003cstrong\u003eepoxy pothole repair mortar\u003c\/strong\u003e for deep damage in asphalt, tarmac and concrete. It fills from 15mm to 200mm in one application, making it useful where a hole needs substantial rebuilding without repeatedly applying shallow repair layers.\u003c\/p\u003e\u003cp\u003eThe system combines graded granite aggregate, epoxy resin and a separate curing agent. Once mixed, it forms a loose-textured repair compound that is worked into the hole and compacted to remove air pockets. The cured repair has a hard, black, granular finish that blends with asphalt surfaces and provides slip resistance.\u003c\/p\u003e\u003cp\u003eUse it for deeper holes in busy car parks, loading bays and other traffic areas, indoors or outdoors. The depth capability makes this grade a useful choice when the base of a pothole sits well below the surrounding surface. Measure the full void before ordering: the same pack covers a smaller area as the repair gets deeper.\u003c\/p\u003e\u003cp\u003eThis is a resin-based repair system, so allow time for it to cure before reopening the area. Plan access around the stated traffic times and the actual temperature on site. For thinner repairs in areas used by forklifts and lorries, compare \u003ca href=\"\/products\/watco-bitu-mend-advanced\"\u003eBitu-Mend Advanced\u003c\/a\u003e. On smooth substrates, pair Deep Fill with \u003ca href=\"\/products\/watco-tack-coat\"\u003eWatco Tack Coat\u003c\/a\u003e to provide the specified bond.\u003c\/p\u003e\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\u003cp\u003eRemove loose material, oil and contamination from the void. The substrate must be sound and preferably dry; slight damp is acceptable. A primer is not normally needed for rough holes, but apply Tack Coat to smooth substrates.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize \/ Colour\u003c\/th\u003e\n\u003ctd\u003e25kg \/ Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eComposition\u003c\/th\u003e\n\u003ctd\u003eEpoxy resin, curing agent and graded granite aggregate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication depth\u003c\/th\u003e\n\u003ctd\u003e15–200mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApproximately 0.5m² per pack at 30mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking time\u003c\/th\u003e\n\u003ctd\u003eApproximately 30 minutes at 10–20°C; shorter in warmer conditions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTraffic\u003c\/th\u003e\n\u003ctd\u003eAt 10–20°C: foot traffic 8–12 hours; heavy traffic 12–24 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e12 months, unopened\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eDirections for Use\u003c\/h3\u003e\u003cp\u003eMix the curing agent into the resin thoroughly using a wide-bladed tool. Immediately combine the mixed liquids with the granite aggregate, coating every particle. Place the compound into the void, work it into gaps and lightly tamp with wood to remove air pockets. Finish with a trowel, wiping it with white spirit to reduce drag.\u003c\/p\u003e\u003ch3\u003eLimitations\u003c\/h3\u003e\u003cp\u003eKeep the repair within the stated thickness range. Allow the required curing time before traffic returns; lower temperatures extend it. Store above 10°C and protect from frost. Remove food products from the work area during application and cure. Read the technical and safety sheets before use.\u003c\/p\u003e\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat depth can I repair?\u003c\/strong\u003e\u003cbr\u003eApply between 15mm and 200mm in one application. This grade is intended for deep holes rather than thin surface repairs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much material should I order?\u003c\/strong\u003e\u003cbr\u003eA 25kg pack has an approximate volume of 15 litres and covers about 0.5m² at 30mm. Deeper holes use more material.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen can vehicles use the repair?\u003c\/strong\u003e\u003cbr\u003eAllow 12–24 hours for heavy traffic at 10–20°C. Foot traffic is possible after 8–12 hours. Lower temperatures extend curing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs primer required?\u003c\/strong\u003e\u003cbr\u003eNot normally for rough holes and cracks. Use Watco Tack Coat over smooth substrates, following its instructions.\u003c\/p\u003e\u003ch3\u003eData Sheets\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-deep-repair-6.pdf?v=1793966848\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-deep-repair-7.pdf?v=1793966847\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Aggregate (GB)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-deep-repair-8.pdf?v=1793966847\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Curing Agent (GB)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-deep-repair-9.pdf?v=1793966847\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Resin (GB)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-deep-repair-10.pdf?v=1793966847\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Aggregate (GBNI)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-deep-repair-11.pdf?v=1793966847\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Curing Agent (GBNI)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-deep-repair-12.pdf?v=1793966848\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Resin (GBNI)\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"25kg","offer_id":58181202444628,"sku":"BITUDF25","price":130.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-deep-repair-1.jpg?v=1793966801"},{"product_id":"watco-bitu-mend-advanced","title":"Watco Bitu-Mend Advanced","description":"\u003cp\u003e\u003cstrong\u003eWatco Bitu-Mend Advanced\u003c\/strong\u003e is a \u003cstrong\u003eheavy-duty asphalt repair mortar\u003c\/strong\u003e for potholes, damaged work areas and worn surfaces exposed to forklift, lorry and HGV traffic. Its epoxy resin and granite aggregate formulation is designed for demanding repairs where a conventional bitumen-based patch may not offer the required durability.\u003c\/p\u003e\u003cp\u003eApply at depths from 10mm to 100mm to repair holes, splits and damaged asphalt in car parks, loading bays and gangways. It can also be used on concrete. The trowel-applied mixture can be worked around edges and into crevices, then compacted to create a firm repair with a hard, black, slip-resistant finish.\u003c\/p\u003e\u003cp\u003eThe range of applications includes bedding and fixing roller shutter door guide rails, repairing trip hazards and resurfacing worn local areas. Prepare each repair to a sound base and use \u003ca href=\"\/products\/watco-tack-coat\"\u003eWatco Tack Coat primer\u003c\/a\u003e, as required by the technical sheet. Correct priming, thorough mixing and compaction are important parts of the repair system.\u003c\/p\u003e\u003cp\u003eChoose Advanced for heavy-use repairs within its stated depth range. If the hole is deeper than 100mm, \u003ca href=\"\/products\/watco-bitu-mend-deep-fill\"\u003eBitu-Mend Deep Fill\u003c\/a\u003e offers application up to 200mm. Both products need a curing period before traffic returns, so plan the work around the operating temperature and the access needs of the area.\u003c\/p\u003e\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\u003cp\u003eRemove loose material, oil and contamination from the void. The substrate must be sound and preferably dry; slight damp is acceptable. Prime prepared surfaces with Watco Tack Coat before applying the repair mortar.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize \/ Colour\u003c\/th\u003e\n\u003ctd\u003e25kg \/ Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eComposition\u003c\/th\u003e\n\u003ctd\u003eEpoxy resin, curing agent and graded granite aggregate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication depth\u003c\/th\u003e\n\u003ctd\u003e10–100mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApproximately 1m² per pack at 15mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking time\u003c\/th\u003e\n\u003ctd\u003eApproximately 30 minutes at 10–20°C; shorter in warmer conditions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTraffic\u003c\/th\u003e\n\u003ctd\u003eAt 10–20°C: foot traffic 8–12 hours; heavy traffic 12–24 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e12 months, unopened\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eDirections for Use\u003c\/h3\u003e\u003cp\u003eMix the curing agent into the resin thoroughly using a wide-bladed tool. Immediately combine the mixed liquids with the granite aggregate, coating every particle. Place the compound into the void, work it into gaps and lightly tamp with wood to remove air pockets. Finish with a trowel.\u003c\/p\u003e\u003ch3\u003eLimitations\u003c\/h3\u003e\u003cp\u003eKeep the repair within the stated thickness range. Allow the required curing time before traffic returns; lower temperatures extend it. Store above 10°C and protect from frost. Remove food products from the work area during application and cure. Read the technical and safety sheets before use.\u003c\/p\u003e\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes Bitu-Mend Advanced need primer?\u003c\/strong\u003e\u003cbr\u003eYes. Prime prepared surfaces with Watco Tack Coat as specified in the technical sheet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it take forklift and lorry traffic?\u003c\/strong\u003e\u003cbr\u003eIt is designed for heavy-use areas including loading bays and car parks. Allow the full heavy-traffic cure time before reopening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thickness should I apply?\u003c\/strong\u003e\u003cbr\u003eApply 10–100mm. For deeper holes, choose Bitu-Mend Deep Fill instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the coverage and cure time?\u003c\/strong\u003e\u003cbr\u003eAllow approximately 1m² per 25kg at 15mm. Heavy traffic can return after 12–24 hours at 10–20°C; cold conditions slow curing.\u003c\/p\u003e\u003ch3\u003eData Sheets\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-advanced-repair-13.pdf?v=1793966847\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-advanced-repair-14.pdf?v=1793966847\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Aggregate (GB)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-advanced-repair-15.pdf?v=1793966847\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Curing Agent (GB)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-advanced-repair-16.pdf?v=1793966847\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Resin (GB)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-advanced-repair-17.pdf?v=1793966847\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Aggregate (GBNI)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-advanced-repair-18.pdf?v=1793966847\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Curing Agent (GBNI)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-advanced-repair-19.pdf?v=1793966847\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Resin (GBNI)\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"25kg","offer_id":58181202739540,"sku":"BITUHD25","price":143.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-advanced-repair-1.jpg?v=1793966816"},{"product_id":"watco-concrex-sub-zero","title":"Watco Concrex Sub Zero","description":"\u003cp\u003eWatco Concrex Sub Zero is a polyaspartic concrete repair mortar for damaged floors in freezers, cold stores and unheated industrial areas. It cures at temperatures down to -20°C, making it a practical choice for repairs where ordinary mortars would struggle to harden.\u003c\/p\u003e\u003cp\u003eUse it to fill holes, restore worn concrete and repair damaged edges on concrete, metal and sand and cement screeds. The resin, curing agent and blended aggregate form a trowel-applied mortar that can be finished flush with the surrounding surface. Its mid-grey finish suits a wide range of working floors, from chilled storage areas to exposed maintenance spaces.\u003c\/p\u003e\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\u003cp\u003eRemove loose material, dirt, grease and contamination. Wire brush and sweep the repair until the substrate is clean, dry and sound. Pay attention to the sides and base of holes so the mortar can bond to a firm surface.\u003c\/p\u003e\u003cp\u003eA primer is not normally required for rough holes. Use \u003ca href=\"\/products\/watco-tack-coat-sub-zero\"\u003eWatco Tack Coat Sub Zero\u003c\/a\u003e for smooth surfaces, thin screeds, intricate repairs and areas subject to high impact, such as step nosings. Follow the primer's instructions before applying the mortar.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePack size: 10kg; colour: mid-grey.\u003c\/li\u003e\n\u003cli\u003eComposition: three-component polyaspartic resin repair mortar.\u003c\/li\u003e\n\u003cli\u003eCoverage: approximately 1.2m² per pack at 5mm thick.\u003c\/li\u003e\n\u003cli\u003eNormal application depth: 5–50mm.\u003c\/li\u003e\n\u003cli\u003eMinimum application temperature: -20°C.\u003c\/li\u003e\n\u003cli\u003eWorking life: approximately 30–60 minutes, depending on temperature.\u003c\/li\u003e\n\u003cli\u003eTypical cure: 48 hours at -20°C, 16 hours at 0°C and 5 hours at 15°C.\u003c\/li\u003e\n\u003cli\u003eShelf life: 12 months in unopened containers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDirections for Use\u003c\/h3\u003e\u003cp\u003eMix the two liquid components thoroughly, then combine with the aggregate on a suitable mixing board. Work the materials together until the colour and consistency are uniform, with no unmixed pockets.\u003c\/p\u003e\u003cp\u003ePress the mortar firmly into the prepared repair, compacting against the edges. Finish with a steel float or trowel. Wiping the blade with white spirit helps reduce drag. For repairs deeper than 50mm, build up in layers and allow each layer to cure before continuing.\u003c\/p\u003e\u003ch3\u003eLimitations\u003c\/h3\u003e\u003cp\u003eFeather edges only where the main body of the repair is at least 5mm thick. Coverage depends on repair depth and surface profile; deeper holes require proportionately more material. Allow for slower curing at lower temperatures before returning the area to service. Store between 10°C and 30°C and protect from freezing.\u003c\/p\u003e\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan Concrex Sub Zero cure in a freezer?\u003c\/strong\u003e\u003cbr\u003eYes. This grade is designed to cure at temperatures down to -20°C. Typical curing time at -20°C is 48 hours; allow suitable time before putting the repair back into service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it need a primer?\u003c\/strong\u003e\u003cbr\u003eRough holes do not normally need priming. Tack Coat Sub Zero is recommended on smooth surfaces, for thin screeds and for intricate or high-impact repairs such as step nosings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much area will one pack repair?\u003c\/strong\u003e\u003cbr\u003eA 10kg pack covers approximately 1.2m² at 5mm thick. Coverage decreases as the repair depth increases.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I fill a hole deeper than 50mm?\u003c\/strong\u003e\u003cbr\u003eBuild repairs deeper than 50mm in layers, allowing each layer to cure. The normal application depth is 5–50mm.\u003c\/p\u003e\u003ch3\u003eData Sheets\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-zero-datasheet-1.pdf?v=1793979879\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-zero-datasheet-2.pdf?v=1793979879\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Aggregate (GB)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-zero-datasheet-3.pdf?v=1793979879\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Curing Agent (GB)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-zero-datasheet-4.pdf?v=1793979879\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Resin (GB)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-zero-datasheet-5.pdf?v=1793979879\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Aggregate (GBNI)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-zero-datasheet-6.pdf?v=1793979880\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Curing Agent (GBNI)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-zero-datasheet-7.pdf?v=1793979880\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Resin (GBNI)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Watco","offers":[{"title":"10kg","offer_id":58185021030740,"sku":"CXSUB10","price":156.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-zero-repair-1.png?v=1793979727"},{"product_id":"watco-concrex-vertical-cold-cure","title":"Watco Concrex Vertical Cold Cure","description":"\u003cp\u003eWatco Concrex Vertical Cold Cure is a lightweight epoxy repair mortar for damaged concrete and masonry faces in cool conditions. Its non-slump consistency helps the material stay in place on vertical surfaces, making it suitable for repairing pillars, sills, lintels, beams, render and stonework.\u003c\/p\u003e\u003cp\u003eThis cold-curing grade hardens at temperatures down to 0°C, allowing surface repairs in cold rooms and unheated areas. At around one third of the density of ordinary mortar, it is easier to work into vertical defects. Use it to restore frost-spalled concrete, fill damaged faces and rebuild surface profiles where a conventional floor repair mortar would be difficult to apply.\u003c\/p\u003e\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\u003cp\u003eThe substrate must be clean, dry and sound. Concrete and render should be at least four weeks old. Remove loose material, existing coatings, grease and contamination, and make sure stonework is clean and dry.\u003c\/p\u003e\u003cp\u003eWhere reinforcement is exposed, remove loose rust and treat with a suitable rust converter and primer, allowing the treatment to cure. \u003cstrong\u003ePrime all vertical applications with \u003ca href=\"\/products\/watco-tack-coat-sub-zero\"\u003eWatco Tack Coat Sub Zero\u003c\/a\u003e.\u003c\/strong\u003e Follow its preparation, application and overcoating instructions.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePack size: 10kg; colour: grey.\u003c\/li\u003e\n\u003cli\u003eComposition: two-component lightweight epoxy resin mortar.\u003c\/li\u003e\n\u003cli\u003eCoverage: approximately 2.4m² per pack at 5mm thick.\u003c\/li\u003e\n\u003cli\u003eApplication depth: 5–50mm; build deeper repairs in layers.\u003c\/li\u003e\n\u003cli\u003eMinimum application temperature: 0°C.\u003c\/li\u003e\n\u003cli\u003eTypical curing time: 24 hours at 0°C.\u003c\/li\u003e\n\u003cli\u003eWorking life: up to 30 minutes.\u003c\/li\u003e\n\u003cli\u003eShelf life: 12 months in unopened containers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDirections for Use\u003c\/h3\u003e\u003cp\u003eCondition the material at 15–25°C for at least eight hours before use. Mix the resin and aggregate with the curing agent on a mixing board rather than in the bucket. Work thoroughly until the colour is consistent throughout. Wear suitable protective gloves and follow the safety data sheets.\u003c\/p\u003e\u003cp\u003ePress the mixed mortar firmly onto the tacky primer, compacting it into the defect. Shape and smooth with a steel float, wiping the blade with white spirit to reduce dragging. Work within the available pot life and allow the repair to cure before loading or further finishing.\u003c\/p\u003e\u003ch3\u003eLimitations\u003c\/h3\u003e\u003cp\u003eThis is a surface facing and filling material, not a structural repair or bonding system. It is less impact-resistant than standard Concrex. Thin sections below 5mm may not be impervious; only feather edges where the bulk of the repair is at least 5mm thick. Do not steam clean or expose to temperatures above 60°C. Trial a small area if appearance is critical, and protect stored material from freezing.\u003c\/p\u003e\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I use this mortar on a vertical wall?\u003c\/strong\u003e\u003cbr\u003eYes. Its lightweight, non-slump consistency is intended for vertical surface repairs, including concrete walls, pillars, sills, lintels and damaged render.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a primer required?\u003c\/strong\u003e\u003cbr\u003eYes. Watco specifies Tack Coat Sub Zero for all vertical applications. Apply the mortar to the tacky primer in accordance with the primer's instructions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill it cure in an unheated building?\u003c\/strong\u003e\u003cbr\u003eIt cures at temperatures down to 0°C. Typical curing time is 24 hours at 0°C; condition the material at 15–25°C for eight hours before application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it suitable for structural concrete repairs?\u003c\/strong\u003e\u003cbr\u003eNo. It is intended for surface facing and filling, rather than structural repairs or bonding. Assess the condition of the substrate before starting work.\u003c\/p\u003e\u003ch3\u003eData Sheets\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-vertical-datasheet-8.pdf?v=1793979879\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-vertical-datasheet-9.pdf?v=1793979879\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Curing Agent (GB)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-vertical-datasheet-10.pdf?v=1793979880\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Resin (GB)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-vertical-datasheet-11.pdf?v=1793979879\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Curing Agent (GBNI)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-vertical-datasheet-12.pdf?v=1793979880\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Resin (GBNI)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Watco","offers":[{"title":"10kg","offer_id":58185022472532,"sku":"CXVCC10","price":145.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-vertical-repair-1.jpg?v=1793979736"},{"product_id":"watco-bitu-mend-pour-and-restore","title":"Watco Bitu-Mend Pour \u0026 Restore","description":"\u003cp\u003eWatco Bitu-Mend Pour \u0026amp; Restore is a pourable epoxy repair compound for shallow damage in asphalt and tarmac. It restores pitted, worn, cracked and dished areas, helping create a more even surface in car parks, yards and pavements.\u003c\/p\u003e\u003cp\u003eThe mixed material flows into shallow defects and can be spread with a trowel to follow the surrounding surface. A granite finishing aggregate is scattered over the wet repair to produce a black, slip-resistant finish. This makes it useful for resurfacing local areas of deteriorated asphalt where a deep pothole filler would be difficult to spread in a thin section.\u003c\/p\u003e\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\u003cp\u003eRemove loose stones, dirt, oil and other contamination from the repair. Brush out the area thoroughly and leave a sound base. The surface should preferably be dry, although slight dampness is acceptable. Avoid leaving loose debris that could interfere with adhesion or the finished profile.\u003c\/p\u003e\u003cp\u003eCheck the depth across the whole area before mixing. Pour \u0026amp; Restore is designed for shallow resurfacing between 6.5mm and 20mm thick. Plan the work so the mixed compound can be placed and finished within its short working life.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePack size: 15kg; finished colour: black.\u003c\/li\u003e\n\u003cli\u003eType: pourable epoxy asphalt repair compound with finishing aggregate.\u003c\/li\u003e\n\u003cli\u003eCoverage: approximately 1m² per pack at 10mm thick.\u003c\/li\u003e\n\u003cli\u003eApplication depth: 6.5–20mm.\u003c\/li\u003e\n\u003cli\u003eWorking life: approximately 15 minutes at 20°C, shorter in warmer conditions.\u003c\/li\u003e\n\u003cli\u003eTouch dry: approximately 1 hour at 20–25°C.\u003c\/li\u003e\n\u003cli\u003eReady for traffic: approximately 16 hours at 20–25°C.\u003c\/li\u003e\n\u003cli\u003eShelf life: 24 months in unopened containers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDirections for Use\u003c\/h3\u003e\u003cp\u003eAdd the curing agent and, where appropriate, the accelerator to the resin and aggregate in the outer bucket. Mix thoroughly with a wide-bladed tool, ensuring the sides and base are incorporated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo not add the accelerator if the temperature is above 23°C, or if you need a longer working life for several small repairs.\u003c\/strong\u003e Follow the technical data sheet for the mixing sequence. Pour into the prepared area and spread with a trowel. Before the compound cures, scatter the supplied finishing aggregate over the surface to complete the repair.\u003c\/p\u003e\u003ch3\u003eLimitations\u003c\/h3\u003e\u003cp\u003eUse for shallow resurfacing rather than deep potholes. For deeper defects, consider \u003ca href=\"\/products\/watco-bitu-mend-deep-fill\"\u003eWatco Bitu-Mend Deep Fill\u003c\/a\u003e or \u003ca href=\"\/products\/watco-bitu-mend-advanced\"\u003eWatco Bitu-Mend Advanced\u003c\/a\u003e, checking their individual depth requirements. Coverage varies with depth and surface condition. Keep traffic off until sufficiently cured; cooler conditions extend curing times. Store above 10°C and protect from freezing.\u003c\/p\u003e\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat type of asphalt damage can it repair?\u003c\/strong\u003e\u003cbr\u003eIt is designed for shallow, worn, pitted, cracked or dished asphalt and tarmac, including local repairs in car parks, yards and pavements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow thick should I apply it?\u003c\/strong\u003e\u003cbr\u003eApply between 6.5mm and 20mm thick. One 15kg pack covers approximately 1m² at 10mm depth.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should I leave out the accelerator?\u003c\/strong\u003e\u003cbr\u003eDo not add it when the temperature is above 23°C, or when a longer working life is needed for several small repairs. Follow the technical data sheet's mixing instructions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen can traffic use the repaired area?\u003c\/strong\u003e\u003cbr\u003eAt 20–25°C, the typical traffic-ready time is 16 hours. Lower temperatures extend curing time; keep traffic off until the material has cured sufficiently.\u003c\/p\u003e\u003ch3\u003eData Sheets\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-pour-datasheet-13.pdf?v=1793979880\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-pour-datasheet-14.pdf?v=1793979879\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Accelerator (GB)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-pour-datasheet-15.pdf?v=1793979880\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Curing Agent (GB)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-pour-datasheet-16.pdf?v=1793979879\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Resin (GB)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-pour-datasheet-17.pdf?v=1793979880\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Scatter Aggregate (GB)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-pour-datasheet-18.pdf?v=1793979879\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Accelerator (GBNI)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-pour-datasheet-19.pdf?v=1793979880\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Curing Agent (GBNI)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-pour-datasheet-20.pdf?v=1793979879\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Resin (GBNI)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-pour-datasheet-21.PDF?v=1793979879\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Scatter Aggregate (GBNI)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Watco","offers":[{"title":"15kg","offer_id":58185022964052,"sku":"BITUPR15","price":140.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-pour-repair-1.jpg?v=1793979762"},{"product_id":"watco-concrex-flex","title":"Watco Concrex Flex","description":"\u003cp\u003eWatco Concrex Flex is an epoxy concrete repair mortar for floors exposed to vibration, movement and repeated impact. Its modified resin blend gives a degree of flexibility, helping repairs resist cracking where a rigid mortar may struggle. Use it around ramps, guide rail surrounds and damaged floor joint edges in busy working areas.\u003c\/p\u003e\u003cp\u003eThe mid-grey mortar is suitable for internal and external repairs to concrete, sand and cement, and metal. It provides a hard-wearing, non-dusting finish that can be left exposed or painted once cured. This is a useful option when choosing a floor repair compound for an area where movement matters as much as surface strength.\u003c\/p\u003e\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\u003cp\u003eRemove loose material, dust, oil and grease, leaving a clean, sound and dry surface. Wire brushing and sweeping are usually sufficient for loose debris; use a suitable degreaser where needed.\u003c\/p\u003e\u003cp\u003eRough patch repairs do not normally need priming. \u003ca href=\"\/products\/watco-tack-coat\"\u003eWatco Tack Coat\u003c\/a\u003e is recommended for thin screeds over smooth surfaces, non-porous or metal substrates, and intricate or high-impact details. Damp surfaces must be primed with Tack Coat; do not apply the mortar to a wet substrate.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePack size: 10kg; colour: mid-grey.\u003c\/li\u003e\n\u003cli\u003eComposition: finely graded sand pre-blended with epoxy resin, with separate curing agent.\u003c\/li\u003e\n\u003cli\u003eCoverage: approximately 1.2m² per pack at 5mm thick.\u003c\/li\u003e\n\u003cli\u003eHole filling: normally 5–50mm thick.\u003c\/li\u003e\n\u003cli\u003eScreeding: maximum 15mm thick.\u003c\/li\u003e\n\u003cli\u003eWorking life: approximately 30 minutes.\u003c\/li\u003e\n\u003cli\u003eTypical curing time: 3–6 hours, depending on temperature.\u003c\/li\u003e\n\u003cli\u003eShelf life: 12 months unopened; store at 10–30°C and protect from freezing.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDirections for Use\u003c\/h3\u003e\u003cp\u003eTip the resin and sand blend onto a mixing board or into a suitable tray. Shake the curing agent, add it to the blend and work thoroughly with a trowel until the mortar has an even colour and consistency. Wear suitable protective gloves and follow the pack instructions.\u003c\/p\u003e\u003cp\u003eCompact firmly into the repair and finish with a steel float. Wipe the blade with a cloth dampened with white spirit to reduce drag. Feather the perimeter only where most of the repair remains at least 5mm thick. For deeper repairs, apply separate layers, allowing 6–8 hours between them.\u003c\/p\u003e\u003ch3\u003eLimitations\u003c\/h3\u003e\u003cp\u003eLow temperatures extend curing; at 10°C and below, hardening can become very slow or stop. Plan application in warmer conditions. The 50mm depth applies to holes, not broad screeds. Coverage reduces as depth increases. Remove food products from the area during application and curing, and consult the data sheets before use.\u003c\/p\u003e\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhere should I use Concrex Flex?\u003c\/strong\u003e\u003cbr\u003eUse it for floor repairs exposed to movement, vibration or impact, including ramps, guide rail surrounds and damaged floor joint edges.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it need a primer?\u003c\/strong\u003e\u003cbr\u003eRough patch repairs usually need none. Use Tack Coat on damp, smooth, non-porous or metal surfaces, for thin screeds and for intricate or high-impact repairs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow deep can I apply it?\u003c\/strong\u003e\u003cbr\u003eApply 5–50mm for hole filling, with a maximum of 15mm for screeding. Deeper repairs need separate layers; feather only the perimeter where the main repair is at least 5mm thick.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much will one pack cover?\u003c\/strong\u003e\u003cbr\u003eA 10kg pack covers approximately 1.2m² at 5mm thick. Actual consumption depends on depth and the shape of the damage.\u003c\/p\u003e\u003ch3\u003eData Sheets\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-batch7-flex-datasheet-5.pdf?v=1793982426\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-batch7-flex-datasheet-1.pdf?v=1793982426\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet - Curing Agent (GB)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-batch7-flex-datasheet-2.pdf?v=1793982426\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet - Resin (GB)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-batch7-flex-datasheet-3.pdf?v=1793982426\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet - Curing Agent (GBNI)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-batch7-flex-datasheet-4.pdf?v=1793982425\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet - Resin (GBNI)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Watco","offers":[{"title":"10kg","offer_id":58185371418964,"sku":"CXFLEX10","price":130.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-batch7-flex-1.jpg?v=1793982444"},{"product_id":"watco-concrex-vertical","title":"Watco Concrex Vertical","description":"\u003cp\u003eWatco Concrex Vertical is a lightweight epoxy repair mortar for damaged concrete and masonry faces. Its non-slump consistency helps it stay in place while you rebuild worn or broken surface profiles on pillars, sills, lintels, beams, render and stonework.\u003c\/p\u003e\u003cp\u003eAt around one third of the density of ordinary mortar, it is easier to handle on vertical surfaces. Use it for frost-spalled concrete and surface damage around exposed reinforcement, after the steel and substrate have been prepared correctly. The grey finish can be smoothed with a steel float to blend the repair into the surrounding face.\u003c\/p\u003e\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\u003cp\u003eConcrete and render must be dry, sound and at least four weeks old. Strip away previous coatings, contamination and loose material. Wire brush powdering concrete, and remove algae and contamination from stone.\u003c\/p\u003e\u003cp\u003eClean exposed rusty reinforcement, treat it with a suitable rust converter and primer, and allow that treatment to cure. \u003cstrong\u003e\u003ca href=\"\/products\/watco-tack-coat\"\u003eWatco Tack Coat\u003c\/a\u003e is required for all vertical applications.\u003c\/strong\u003e Follow the primer instructions and apply the mortar while the primer is tacky.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePack size: 10kg; colour: grey.\u003c\/li\u003e\n\u003cli\u003eType: epoxy resin repair mortar with lightweight fillers.\u003c\/li\u003e\n\u003cli\u003eCoverage: approximately 2.4m² per pack at 5mm thick.\u003c\/li\u003e\n\u003cli\u003eFinish: smooth and impervious at suitable thickness.\u003c\/li\u003e\n\u003cli\u003eTypical cure: 3–6 hours at 15–30°C.\u003c\/li\u003e\n\u003cli\u003eWorking life: 30–60 minutes at 15–30°C, shorter in warmer conditions.\u003c\/li\u003e\n\u003cli\u003eTools: steel float or trowel.\u003c\/li\u003e\n\u003cli\u003eShelf life: 12 months unopened; protect from freezing.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDirections for Use\u003c\/h3\u003e\u003cp\u003eKeep the material at 15–25°C for at least eight hours before use. Follow the pack's mixing sequence: tip the aggregate onto a mixing board, combine the liquid components thoroughly and work them into the aggregate. Mix until the colour is consistent, wearing suitable protective gloves.\u003c\/p\u003e\u003cp\u003ePress firmly onto the tacky primer and shape the repair with a trowel. Smooth with a steel float, occasionally wiping the blade with a cloth lightly dampened with white spirit. Protect from rain during curing. Clean tools before the mortar hardens.\u003c\/p\u003e\u003ch3\u003eLimitations\u003c\/h3\u003e\u003cp\u003eConcrex Vertical is for surface facing and filling, not structural repair or bonding. It has less impact resistance than standard Concrex and may not be impervious below 5mm thick. Do not steam clean or expose to temperatures above 60°C.\u003c\/p\u003e\u003cp\u003eAt 10°C and below, curing slows and can stop; use \u003ca href=\"\/products\/watco-concrex-vertical-cold-cure\"\u003eConcrex Vertical Cold Cure\u003c\/a\u003e for low-temperature work. Check the repair profile and depth against the technical sheet before application.\u003c\/p\u003e\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes Concrex Vertical need priming?\u003c\/strong\u003e\u003cbr\u003eYes. Use Watco Tack Coat for all vertical applications and apply the mortar while the primer is tacky, following the primer's instructions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I repair a concrete pillar with it?\u003c\/strong\u003e\u003cbr\u003eYes, for surface facing and filling on a sound, correctly prepared pillar. It is not suitable for structural concrete repairs or bonding.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does one pack cover?\u003c\/strong\u003e\u003cbr\u003eA 10kg pack covers approximately 2.4m² at 5mm thick. Deeper repairs use more material.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use the original grade in cold weather?\u003c\/strong\u003e\u003cbr\u003eCuring slows and can halt at 10°C and below. Choose Concrex Vertical Cold Cure for low-temperature applications.\u003c\/p\u003e\u003ch3\u003eData Sheets\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-vertical-datasheet-8.pdf?v=1793979879\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-batch7-vertical-datasheet-6.pdf?v=1793982426\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet - Curing Agent (GB)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-batch7-vertical-datasheet-7.pdf?v=1793982426\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet - Resin (GB)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-batch7-vertical-datasheet-8.pdf?v=1793982426\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet - Curing Agent (GBNI)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-batch7-vertical-datasheet-9.pdf?v=1793982426\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet - Resin (GBNI)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Watco","offers":[{"title":"10kg","offer_id":58185371681108,"sku":"CXV10","price":130.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-batch7-vertical-1.jpg?v=1793982458"},{"product_id":"watco-concrex-fine-filler","title":"Watco Concrex Fine Filler","description":"\u003cp\u003eWatco Concrex Fine Filler is a two-part epoxy paste for small concrete repairs before painting. Use it to fill chips, scratches, bolt holes and surface blemishes that can become more noticeable under a new floor coating, particularly a gloss finish.\u003c\/p\u003e\u003cp\u003eThe components mix into a grey repair paste that presses easily into minor defects and can be feather-edged for a smooth transition. It suits floors and vertical surfaces, indoors or outside, and needs no primer. Mix small quantities as you work through scattered damage, rather than opening a large batch for a handful of shallow repairs.\u003c\/p\u003e\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\u003cp\u003eRemove dust, grease, oil and contamination. The surface must be sound rather than loose or friable. Clean exposed steel reinforcement back to bright metal. Slight surface dampness is acceptable, but do not apply to wet surfaces.\u003c\/p\u003e\u003cp\u003eIdentify chips and scratches before coating and work the filler into each defect. For damage deeper than 5mm, use \u003ca href=\"\/products\/watco-concrex-carbon-fibre-epoxy-repair-mortar\"\u003eWatco Concrex Carbon Fibre\u003c\/a\u003e or build the repair in layers as described in the technical sheet.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePack size: 1.5kg twin pack, producing approximately 1 litre of mixed filler.\u003c\/li\u003e\n\u003cli\u003eType: two-part epoxy resin paste.\u003c\/li\u003e\n\u003cli\u003eMixing ratio: 1:1 by weight or volume.\u003c\/li\u003e\n\u003cli\u003eApplication thickness: up to 5mm; can be feather-edged.\u003c\/li\u003e\n\u003cli\u003eWorking life: 10–15 minutes at 20°C; 20–30 minutes at 10°C.\u003c\/li\u003e\n\u003cli\u003eAt 20°C: overpaint after approximately 1 hour, foot traffic after 3 hours and heavy traffic after 16 hours.\u003c\/li\u003e\n\u003cli\u003eFull hardness: approximately 4 days at 20°C.\u003c\/li\u003e\n\u003cli\u003eSupplied with gloves, spreader and two spatulas.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDirections for Use\u003c\/h3\u003e\u003cp\u003eTake equal portions of the off-white resin and black curing agent using the supplied spatulas. Mix on a suitable board until the paste is an even grey, with no streaks. Wear the gloves supplied and prepare only what you can apply within the working life.\u003c\/p\u003e\u003cp\u003ePress into the damage with the plastic spreader and smooth flush. Wiping the scraper with a cloth dampened with white spirit makes finishing easier. Clean spills and tools before the filler cures. Once hardened, the repair can be painted with a suitable Watco coating or left as a wearing surface.\u003c\/p\u003e\u003ch3\u003eLimitations\u003c\/h3\u003e\u003cp\u003eCure times increase in cooler conditions: at 10°C, allow approximately 2 hours before overpainting, 6 hours before foot traffic and 24 hours before heavy traffic. Full hardness takes around seven days at this temperature. Plan the coating and reopening schedule accordingly.\u003c\/p\u003e\u003cp\u003eStore unopened packs at 10–30°C, protect from freezing and use within the 12-month shelf life. Remove food products during application and curing. Yield is given as mixed volume because coverage depends on the number, size and depth of the defects.\u003c\/p\u003e\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs a primer needed?\u003c\/strong\u003e\u003cbr\u003eNo primer is required. Apply to a clean, sound substrate; slight dampness is acceptable, but the surface must not be wet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I mix only part of the pack?\u003c\/strong\u003e\u003cbr\u003eYes. Mix equal portions of resin and curing agent by weight or volume until uniformly grey. Prepare small amounts that can be applied within the working life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much filler does one pack make?\u003c\/strong\u003e\u003cbr\u003eThe 1.5kg twin pack produces approximately 1 litre of mixed filler. Area coverage depends on the depth and shape of the defects.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow soon can I paint the repair?\u003c\/strong\u003e\u003cbr\u003eAllow approximately 1 hour at 20°C or 2 hours at 10°C before overpainting. These are initial-set times; heavy traffic and full hardness require longer.\u003c\/p\u003e\u003ch3\u003eData Sheets\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-batch7-fine-filler-datasheet-14.pdf?v=1793982426\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-batch7-fine-filler-datasheet-10.pdf?v=1793982426\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet - Curing Agent (GB)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-batch7-fine-filler-datasheet-11.pdf?v=1793982426\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet - Resin (GB)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-batch7-fine-filler-datasheet-12.pdf?v=1793982426\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet - Curing Agent (GBNI)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-batch7-fine-filler-datasheet-13.pdf?v=1793982426\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet - Resin (GBNI)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Watco","offers":[{"title":"1.5kg","offer_id":58185372172628,"sku":"CXFF","price":60.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-batch7-fine-filler-1.jpg?v=1793982462"},{"product_id":"watco-concrex-acid-strength","title":"Watco Concrex Acid Strength","description":"\u003cp\u003eWatco Concrex Acid Strength is a two-part epoxy repair mortar for acid-damaged concrete floors, ramps and steps. It is intended for working areas where strong chemicals are handled or stored, and where a patch needs to cope with both traffic and chemical exposure.\u003c\/p\u003e\u003cp\u003eThe mortar is trowelled into local damage and can be feathered around the perimeter. Once cured, it leaves a hard, non-dusting repair. Watco’s resistance table covers a range of acids, including sulphuric acid at 95% concentration. Check the table for the chemical, concentration and exposure period before specifying the repair.\u003c\/p\u003e\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\u003cp\u003eRemove loose concrete, dust, grease and other contamination. Brush or sweep the sides and base of the defect until you reach a sound surface. Rough, dry patch repairs usually need no primer. Use \u003ca href=\"\/products\/watco-tack-coat\"\u003eWatco Tack Coat\u003c\/a\u003e for thin screeds and smooth, non-porous or metal surfaces. Watco also specifies Tack Coat where the substrate is damp.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCoverage is approximately 1.2m² per 10kg at 5mm thick.\u003c\/li\u003e\n\u003cli\u003eNormal repair depth is 5–50mm. Feather the edge where most of the repair is at least 5mm thick.\u003c\/li\u003e\n\u003cli\u003eMinimum application temperature is 10°C.\u003c\/li\u003e\n\u003cli\u003eWorking life is about 60 minutes at 15°C.\u003c\/li\u003e\n\u003cli\u003eAllow 6 hours for light traffic at 20°C or 8 hours at 15°C. Allow at least 16 hours for heavy traffic at 15–20°C.\u003c\/li\u003e\n\u003cli\u003eAllow 7 days to reach full chemical resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDirections for Use\u003c\/h3\u003e\u003cp\u003eRead the pack instructions and safety sheets before mixing. Tip the resin and aggregate blend onto a clean mixing board or tray. Add the curing agent and work it through the aggregate until the mortar has an even colour and texture. For part packs, follow Watco’s proportions and use whole curing agent containers.\u003c\/p\u003e\u003cp\u003eCompact the mortar into the defect with a steel trowel and finish it flush with the adjacent surface. For a repair deeper than 50mm, apply in layers and allow 6–8 hours between layers. Clean tools before the mortar sets.\u003c\/p\u003e\u003ch3\u003eLimitations\u003c\/h3\u003e\u003cp\u003eRemove food products during application and cure. Keep the finished repair below the manufacturer’s 60°C maximum and avoid steam cleaning. The traffic times and chemical resistance times are separate. Schedule chemical exposure around the seven-day cure.\u003c\/p\u003e\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWill it resist sulphuric acid?\u003c\/strong\u003e\u003cbr\u003eWatco rates resistance to 95% sulphuric acid as excellent in its published tests up to 28 days. Check the technical sheet for your exposure conditions and allow seven days for full chemical resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen can the floor reopen?\u003c\/strong\u003e\u003cbr\u003eAllow 6 hours for light traffic at 20°C or 8 hours at 15°C. At 15–20°C, allow at least 16 hours before heavy traffic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need a primer?\u003c\/strong\u003e\u003cbr\u003eRough, dry patches usually need none. Use Tack Coat for smooth, non-porous, metal or damp surfaces and thin screeds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much will a pack cover?\u003c\/strong\u003e\u003cbr\u003eAbout 1.2m² per 10kg at 5mm. Deeper holes require more material.\u003c\/p\u003e\u003ch3\u003eData Sheets\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-concrex-acid-sheet-5.pdf?v=1794326352\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-concrex-acid-sheet-1.pdf?v=1794326352\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Curing Agent (GB)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-concrex-acid-sheet-2.pdf?v=1794326352\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Resin (GB)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-concrex-acid-sheet-3.pdf?v=1794326351\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Curing Agent (GBNI)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-concrex-acid-sheet-4.pdf?v=1794326351\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Resin (GBNI)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Watco","offers":[{"title":"10kg","offer_id":58249778102612,"sku":"CXAS10","price":156.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-concrex-acid-1.jpg?v=1794326359"},{"product_id":"watco-concrex-coving-mortar","title":"Watco Concrex Coving Mortar","description":"\u003cp\u003eWatco Concrex Coving Mortar is a dark grey epoxy mortar for forming a rounded skirting where the floor meets the wall. The curved profile replaces the sharp internal corner where dirt can collect, giving cleaning tools a continuous surface to follow.\u003c\/p\u003e\u003cp\u003eUse it to form coved skirting in laboratories, cleanrooms, hospitals, food halls and bund areas. Its lightweight, fine-textured mix can be shaped with a coving trowel and feathered along the top and floor edges. The cured mortar is non-dusting and can be left exposed or painted with a compatible coating.\u003c\/p\u003e\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\u003cp\u003ePrepare a strip at least 100mm high on the wall and 100mm wide on the adjoining floor. Remove dust, loose material, oil and grease. The prepared surfaces should be sound and dry.\u003c\/p\u003e\u003cp\u003eApply \u003ca href=\"\/products\/watco-tack-coat\"\u003eWatco Tack Coat\u003c\/a\u003e along the run, taking the primer at least 80mm up the base of the wall. Follow the primer’s instructions and apply the mortar while the Tack Coat is still tacky.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTwo-part epoxy mortar, dark grey.\u003c\/li\u003e\n\u003cli\u003eApproximate yield is 5 linear metres per 5kg at a 50mm × 50mm cove profile.\u003c\/li\u003e\n\u003cli\u003eTypical curing times are 120 minutes at 10°C, 80 minutes at 15°C and 60 minutes at 25°C.\u003c\/li\u003e\n\u003cli\u003eSuitable for interior and exterior use on concrete, sand and cement, and metal.\u003c\/li\u003e\n\u003cli\u003eStore between 10°C and 30°C for about eight hours before use. Protect from freezing.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDirections for Use\u003c\/h3\u003e\u003cp\u003eMix the full pack on a mixing board or tray. Add the curing agent to the resin and aggregate blend and mix until the colour is even. Wear the protective equipment specified in the safety sheets. Set out the run and have the coving trowel ready before mixing.\u003c\/p\u003e\u003cp\u003ePress the mortar firmly onto the tacky primer, then draw the coving trowel along the junction to form the radius. Feather the upper and lower edges to leave a neat transition. Where the run crosses an expansion joint, follow Watco’s instructions for cutting through the cured mortar along the joint.\u003c\/p\u003e\u003ch3\u003eLimitations\u003c\/h3\u003e\u003cp\u003eAllow at least 12 hours at 15°C or above before applying a suitable water-based or solvent-free epoxy coating. Wait at least seven days before applying solvent-based paint. Avoid steam cleaning and temperatures above 60°C. Remove food products during application and cure.\u003c\/p\u003e\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow much skirting will one pack make?\u003c\/strong\u003e\u003cbr\u003eA 5kg pack makes approximately 5 metres of skirting at a 50mm × 50mm profile. Larger coves will use more mortar.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Tack Coat required?\u003c\/strong\u003e\u003cbr\u003eYes. Apply Watco Tack Coat to the prepared junction and shape the mortar while the primer is still tacky.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the cove be painted?\u003c\/strong\u003e\u003cbr\u003eYes. Allow at least 12 hours at 15°C or above for a compatible water-based or solvent-free epoxy coating, or seven days for solvent-based paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat tool forms the curve?\u003c\/strong\u003e\u003cbr\u003eUse a coving trowel to shape the radius and feather the edges into the adjacent wall and floor.\u003c\/p\u003e\u003ch3\u003eData Sheets\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-concrex-cove-sheet-5.pdf?v=1794326352\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-concrex-cove-sheet-1.pdf?v=1794326352\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Curing Agent (GB)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-concrex-cove-sheet-2.pdf?v=1794326351\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Resin (GB)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-concrex-cove-sheet-3.pdf?v=1794326352\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Curing Agent (GBNI)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-concrex-cove-sheet-4.pdf?v=1794326351\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Resin (GBNI)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Watco","offers":[{"title":"5kg","offer_id":58249778135380,"sku":"CXCM5","price":101.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-concrex-cove-1.jpg?v=1794326369"},{"product_id":"watco-concrex-cold-set","title":"Watco Concrex Cold Set","description":"\u003cp\u003eWatco Concrex Cold Set is an epoxy concrete repair mortar that cures at temperatures down to 0°C. It is suited to winter maintenance, cold rooms and unheated work areas where the floor needs patching before conditions warm up.\u003c\/p\u003e\u003cp\u003eUse it to rebuild damaged steps, fill holes and restore worn joint edges or eroded areas of concrete. The grey mortar is suitable for internal and external repairs. It can be compacted and trowelled flush, with a feathered edge where the main body of the patch is deep enough.\u003c\/p\u003e\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\u003cp\u003eRemove dust, grease, oil and loose material so the mortar can bond to a sound surface. Rough, dry concrete patches usually need no primer. Use \u003ca href=\"\/products\/watco-tack-coat-sub-zero\"\u003eWatco Tack Coat Sub Zero\u003c\/a\u003e for damp surfaces, thin screeds over smooth concrete and intricate or high-impact details such as step nosings. Keep standing water out of the repair.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMinimum application temperature is 0°C.\u003c\/li\u003e\n\u003cli\u003eNormal application depth is 5–50mm.\u003c\/li\u003e\n\u003cli\u003eAt 5mm thick, a 10kg pack covers approximately 1.2m² and a 25kg pack covers approximately 3m².\u003c\/li\u003e\n\u003cli\u003eAt 0°C, allow approximately 24 hours for light traffic and 48 hours for heavy traffic.\u003c\/li\u003e\n\u003cli\u003eAt 10°C, allow approximately 6 hours for light traffic and 8 hours for heavy traffic.\u003c\/li\u003e\n\u003cli\u003eStore unopened between 10°C and 30°C and protect from freezing.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDirections for Use\u003c\/h3\u003e\u003cp\u003eRead the pack instructions and safety sheets before mixing. Tip the pre-blended resin and aggregate onto a mixing board or tray, add the supplied curing agent in the stated proportions, and work the mix thoroughly until the colour and texture are even. Organise tools and the prepared area before mixing so you can place the mortar within its working life.\u003c\/p\u003e\u003cp\u003ePress firmly into the damaged area and finish with a steel trowel or float. Keep most of the repair at least 5mm thick when feathering the edges. Protect the repair from traffic until the cure time for the site temperature has elapsed.\u003c\/p\u003e\u003ch3\u003eLimitations\u003c\/h3\u003e\u003cp\u003eMeasure the depth as well as the surface area when estimating material. For deeper holes, check \u003ca href=\"\/products\/watco-concrex-cold-set-deep-fill\"\u003eWatco Concrex Cold Set Deep Fill\u003c\/a\u003e for its separate depth range. For temperatures below freezing, check the application range of \u003ca href=\"\/products\/watco-concrex-sub-zero\"\u003eWatco Concrex Sub Zero\u003c\/a\u003e. Keep the cured mortar within the manufacturer’s 60°C service temperature limit.\u003c\/p\u003e\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I use it in a cold room?\u003c\/strong\u003e\u003cbr\u003eYes. Concrex Cold Set cures down to 0°C. At that temperature, allow around 24 hours for light traffic and 48 hours for heavy traffic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich primer should I use?\u003c\/strong\u003e\u003cbr\u003eUse Tack Coat Sub Zero on damp surfaces, for shallow screeds over smooth surfaces and around intricate or high-impact details. Rough, dry patches usually need none.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow deep can I patch?\u003c\/strong\u003e\u003cbr\u003eThe normal range is 5–50mm. Feather around the perimeter only where most of the repair remains at least 5mm thick.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much will each size cover?\u003c\/strong\u003e\u003cbr\u003eAt 5mm, allow approximately 1.2m² for the 10kg pack or 3m² for the 25kg pack.\u003c\/p\u003e\u003ch3\u003eData Sheets\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-concrex-cold-sheet-5.pdf?v=1794326351\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-concrex-cold-sheet-1.pdf?v=1794326352\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Curing Agent (GB)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-concrex-cold-sheet-2.pdf?v=1794326353\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Resin (GB)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-concrex-cold-sheet-3.pdf?v=1794326352\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Curing Agent (GBNI)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-concrex-cold-sheet-4.pdf?v=1794326351\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Resin (GBNI)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Watco","offers":[{"title":"10kg","offer_id":58249778168148,"sku":"CXCS10","price":130.3,"currency_code":"GBP","in_stock":true},{"title":"25kg","offer_id":58249778200916,"sku":"CXCS25","price":261.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-concrex-cold-1.jpg?v=1794326381"},{"product_id":"watco-fine-crack-filler","title":"Watco Fine Crack Filler","description":"\u003cp\u003eWatco Fine Crack Filler is a pourable epoxy resin for narrow cracks in concrete floors. It fills the line of the crack before coating, helping you prepare a more even surface for floor paint. The two-part, 100% solids formula cures without shrinking and can be painted once it has hardened.\u003c\/p\u003e\u003cp\u003eUse it for fine cracks up to 3mm wide and small holes below 50mm in diameter and 25mm deep. The liquid can be drawn level with a scraper, making it practical for local repairs around a floor before repainting. It suits indoor and outdoor concrete, with a grey finish that can be left exposed or coated.\u003c\/p\u003e\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\u003cp\u003eRake loose material out of the crack and remove dust, grease and contamination. The crack must be clean and dry so the resin can bond to its sides. Chasing out the crack is not normally necessary. Check the width, depth and condition of the damage before opening the pack.\u003c\/p\u003e\u003cp\u003eNo primer is required. Check the floor temperature as well as the air temperature, especially in unheated buildings. For work below the original grade's 15°C minimum, see \u003ca href=\"\/products\/watco-fine-crack-filler-cold-cure\"\u003eFine Crack Filler Cold Cure\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePack size is 500ml, comprising resin and curing agent.\u003c\/li\u003e\n\u003cli\u003eComposition is a two-part, 100% solids epoxy resin.\u003c\/li\u003e\n\u003cli\u003eDesigned for cracks up to 3mm wide.\u003c\/li\u003e\n\u003cli\u003eApproximate yield is 25 linear metres of a crack 2mm wide and 5mm deep per pack.\u003c\/li\u003e\n\u003cli\u003eMinimum application temperature is 15°C.\u003c\/li\u003e\n\u003cli\u003eTypical cure is 3–4 hours at 20°C. Allow 4 hours before coating at that temperature.\u003c\/li\u003e\n\u003cli\u003eWorking life is up to 20 minutes. Shelf life is 12 months unopened.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDirections for Use\u003c\/h3\u003e\u003cp\u003eAdd the curing agent to the resin and stir thoroughly with a flat mixing blade or suitable slow-speed paddle. Scrape the sides and base of the tin as you mix, bringing all the material together until it is uniform. Have the prepared crack and application tools ready before combining the components.\u003c\/p\u003e\u003cp\u003ePour carefully along the crack, then draw a straight edge or plastic or rubber scraper over the repair. Remove excess from the surrounding concrete while it is workable. Allow the resin to harden before applying the floor coating.\u003c\/p\u003e\u003ch3\u003eLimitations\u003c\/h3\u003e\u003cp\u003eThis filler is intended for surface filling. Continuing structural movement can cause a crack to reappear. Where one side of a crack has subsided, filling alone will leave a difference in level. Assess that profile separately when planning the repair.\u003c\/p\u003e\u003cp\u003eStore at 15–25°C for at least eight hours before use. Remove food products from the area during application and curing. Actual yield varies along a crack as its width and depth change.\u003c\/p\u003e\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes it need a primer?\u003c\/strong\u003e\u003cbr\u003eNo primer is required. Clean and dry the crack thoroughly before applying the mixed resin.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat crack width can I fill?\u003c\/strong\u003e\u003cbr\u003eUse it for narrow concrete cracks up to 3mm wide. It also fills small holes below 50mm diameter and 25mm deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much crack will one pack fill?\u003c\/strong\u003e\u003cbr\u003eApproximately 25 linear metres at 2mm wide and 5mm deep. Varying dimensions along the crack affect the amount required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen can I paint the repair?\u003c\/strong\u003e\u003cbr\u003eAllow four hours at 20°C before coating. Cooler conditions extend curing, and the original grade has a minimum application temperature of 15°C.\u003c\/p\u003e\u003ch3\u003eData Sheets\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-11nov-repair-sheet-5.pdf?v=1794394683\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-11nov-repair-sheet-1.pdf?v=1794394683\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Curing Agent (GB)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-11nov-repair-sheet-2.pdf?v=1794394683\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Resin (GB)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-11nov-repair-sheet-3.pdf?v=1794394682\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Curing Agent (GBNI)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-11nov-repair-sheet-4.pdf?v=1794394683\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Resin (GBNI)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Watco","offers":[{"title":"500ml","offer_id":58277142102356,"sku":"FCF","price":40.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-11nov-repair-1.jpg?v=1794394701"},{"product_id":"watco-fine-crack-filler-cold-cure","title":"Watco Fine Crack Filler Cold Cure","description":"\u003cp\u003eWatco Fine Crack Filler Cold Cure is a liquid epoxy filler for narrow concrete floor cracks in cold conditions. It can be applied at temperatures down to 0°C, helping you carry out local floor preparation in winter, cold rooms and unheated work areas.\u003c\/p\u003e\u003cp\u003eThe pourable two-part resin fills cracks up to 3mm wide and can be levelled with a scraper before it sets. Its non-shrink formula leaves a hard grey repair that can be coated after curing. Use it to prepare the line of a fine crack before painting, with the application temperature and cure period matched to the conditions on site.\u003c\/p\u003e\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\u003cp\u003eRake out the crack, remove dust and loose material, and make sure it is dry and free of contamination. Chasing out is not normally required. Check the full length for changes in width and depth so you can estimate how much material is needed.\u003c\/p\u003e\u003cp\u003eNo primer is required. Keep the pack at 15–25°C for at least eight hours before use, as directed by Watco. Prepare the area and gather the scraper and mixing tool before combining the resin and curing agent.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePack size is 500ml, comprising resin and curing agent.\u003c\/li\u003e\n\u003cli\u003eTwo-part, 100% solids epoxy resin with a grey appearance.\u003c\/li\u003e\n\u003cli\u003eSuitable for interior and exterior concrete.\u003c\/li\u003e\n\u003cli\u003eDesigned for narrow cracks up to 3mm wide.\u003c\/li\u003e\n\u003cli\u003eApproximate yield is 25 linear metres at 2mm wide and 5mm deep per pack.\u003c\/li\u003e\n\u003cli\u003eMinimum application temperature is 0°C.\u003c\/li\u003e\n\u003cli\u003eThe technical sheet specifies approximately 4 hours curing at 0–5°C.\u003c\/li\u003e\n\u003cli\u003eWorking life is up to 20 minutes. Shelf life is 12 months unopened.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDirections for Use\u003c\/h3\u003e\u003cp\u003eEmpty the curing agent into the resin tin and mix thoroughly with a flat blade or suitable slow-speed paddle. Work around the sides and bottom to incorporate material that could otherwise remain unmixed. Follow the pack instructions and safety data sheets for handling and mixing.\u003c\/p\u003e\u003cp\u003ePour a controlled amount along the crack and level it with a straight edge or plastic or rubber scraper. Wipe away surplus before it hardens. Allow the repair to cure before coating or overlaying it, checking the surface before the next stage of the work.\u003c\/p\u003e\u003ch3\u003eLimitations\u003c\/h3\u003e\u003cp\u003eUse this grade for surface crack filling. A moving crack can reopen, and a difference in level between the two sides needs separate attention. For wider or broken-out areas, assess the depth and consider a suitable \u003ca href=\"\/products\/watco-concrex-cold-set\"\u003eConcrex Cold Set repair mortar\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eCoverage depends on the actual dimensions of the crack. Remove food products from the working area during application and cure. Keep the manufacturer’s technical and safety sheets available when planning the repair.\u003c\/p\u003e\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I apply it at 0°C?\u003c\/strong\u003e\u003cbr\u003eYes. Cold Cure is designed for application down to 0°C. Condition the unopened material at 15–25°C for at least eight hours before use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does it take to cure in the cold?\u003c\/strong\u003e\u003cbr\u003eThe technical sheet gives approximately four hours at 0–5°C. Allow the repair to harden before applying a coating or overlay.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need primer or sanding?\u003c\/strong\u003e\u003cbr\u003eNo primer is required. Level the liquid with a scraper during application to achieve the intended flush repair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat coverage should I allow?\u003c\/strong\u003e\u003cbr\u003eApproximately 25 linear metres per 500ml pack for a crack 2mm wide and 5mm deep. Wider or deeper sections consume more resin.\u003c\/p\u003e\u003ch3\u003eData Sheets\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-11nov-repair-sheet-5.pdf?v=1794394683\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-11nov-repair-sheet-6.pdf?v=1794394683\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Curing Agent (GB)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-11nov-repair-sheet-7.pdf?v=1794394683\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Resin (GB)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-11nov-repair-sheet-8.pdf?v=1794394683\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Curing Agent (GBNI)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-11nov-repair-sheet-9.pdf?v=1794394684\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Resin (GBNI)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Watco","offers":[{"title":"500ml","offer_id":58277143085396,"sku":"FCFCC","price":43.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-11nov-repair-5.jpg?v=1794394715"},{"product_id":"watco-concrex-asphalt-repair","title":"Watco Concrex Asphalt Repair","description":"\u003cp\u003eWatco Concrex Asphalt Repair is an epoxy resin and granite aggregate repair system for damaged asphalt and concrete. It forms a hard black repair for areas carrying forklifts, heavy trolleys and other demanding traffic, including loading bays, car parks, gangways and working areas.\u003c\/p\u003e\u003cp\u003eThe coarse texture blends with an asphalt surface, while the trowel-applied mix can be compacted into potholes and damaged edges. Use it for local repairs and for bedding details such as guide rails and roller shutter door fittings where the manufacturer’s application requirements can be met.\u003c\/p\u003e\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\u003cp\u003eRemove loose material, dirt, oil and grease, leaving a sound base and firm edges. The void should be clean and preferably dry, although slight dampness is acceptable. Check the depth over the whole repair and plan the quantity before mixing.\u003c\/p\u003e\u003cp\u003eRough holes and cracks normally require no primer. Watco’s technical sheet recommends \u003ca href=\"\/products\/watco-tack-coat\"\u003eTack Coat\u003c\/a\u003e when applying over a smooth substrate. Follow the primer instructions if this applies to your repair.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePack size is 25kg, containing resin, curing agent and granite aggregate.\u003c\/li\u003e\n\u003cli\u003eFinish is black, granular and slip resistant.\u003c\/li\u003e\n\u003cli\u003eThe product page specifies a 15–100mm repair depth.\u003c\/li\u003e\n\u003cli\u003eCoverage is approximately 1m² at 15mm, or 0.5m² at 30mm, per pack.\u003c\/li\u003e\n\u003cli\u003eWorking life is approximately 30 minutes at 10–20°C and shorter in warmer conditions.\u003c\/li\u003e\n\u003cli\u003eAllow 8–12 hours for foot traffic and 12–24 hours for heavy traffic at 10–20°C.\u003c\/li\u003e\n\u003cli\u003eMinimum application temperature is 10°C. Shelf life is 12 months unopened.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDirections for Use\u003c\/h3\u003e\u003cp\u003eMix the curing agent into the resin thoroughly with a wide-bladed tool, then immediately combine the liquid with the granite aggregate. Turn the mixture with a trowel until all the aggregate is coated and the loose-textured black compound is consistent.\u003c\/p\u003e\u003cp\u003ePlace the mixed material into the void and work it firmly into gaps and crevices. Lightly tamp with a piece of wood to compact it and remove air pockets. Finish with a trowel, wiping the blade with white spirit as directed by Watco to help produce a smooth surface.\u003c\/p\u003e\u003ch3\u003eLimitations\u003c\/h3\u003e\u003cp\u003eKeep the area closed to traffic for the cure period appropriate to its temperature. Lower temperatures extend curing, so allow enough time before returning a busy route to use. Measure depth carefully because a deeper hole substantially reduces area coverage.\u003c\/p\u003e\u003cp\u003eStore above 10°C and protect from freezing. Remove food products during application and cure. Use the component safety data sheets when planning handling and mixing, and follow the current pack instructions.\u003c\/p\u003e\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan it take forklift traffic?\u003c\/strong\u003e\u003cbr\u003eYes. It is intended for heavy traffic, including forklifts and heavy trolleys. At 10–20°C, allow 12–24 hours before heavy traffic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much area does one pack repair?\u003c\/strong\u003e\u003cbr\u003eA 25kg pack covers approximately 1m² at 15mm thick or 0.5m² at 30mm. Actual coverage depends on the profile of the hole.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it need a primer?\u003c\/strong\u003e\u003cbr\u003eRough holes and cracks normally need none. The technical sheet recommends Tack Coat over smooth substrates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it be used on concrete as well as asphalt?\u003c\/strong\u003e\u003cbr\u003eYes. The product is specified for repairs to asphalt and concrete, for interior and exterior use.\u003c\/p\u003e\u003ch3\u003eData Sheets\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-11nov-repair-sheet-16.pdf?v=1794394683\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-11nov-repair-sheet-10.pdf?v=1794394683\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Aggregate (GB)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-11nov-repair-sheet-11.pdf?v=1794394683\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Curing Agent (GB)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-11nov-repair-sheet-12.pdf?v=1794394683\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Resin (GB)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-11nov-repair-sheet-13.pdf?v=1794394683\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Aggregate (GBNI)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-11nov-repair-sheet-14.pdf?v=1794394683\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Curing Agent (GBNI)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-11nov-repair-sheet-15.pdf?v=1794394683\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Resin (GBNI)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Watco","offers":[{"title":"25kg","offer_id":58277143347540,"sku":"CXARG","price":261.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-11nov-repair-6.jpg?v=1794394721"},{"product_id":"watco-asphalt-easy-fill","title":"Watco Asphalt Easy Fill","description":"\u003cp\u003eWatco Asphalt Easy Fill is a flexible black sealant for cracks in asphalt and tarmac. Its rubberised bitumen formulation seals the opening and helps protect the surface against water ingress and erosion. The cartridge fits a standard skeleton gun, making it convenient for small repairs along a crack or joint.\u003c\/p\u003e\u003cp\u003eIt can also be used on concrete, metal, stone and brick, with compatibility checked where needed. The sealant moves with the substrate and is suitable for indoor and outdoor applications. Use it where a flexible seal is needed around local surface damage and the joint dimensions fall within Watco’s guidance.\u003c\/p\u003e\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\u003cp\u003eClean the sides of the crack or joint and remove dust, loose debris, grease and contamination that could affect adhesion. Allow the surface to dry. Check the width and depth along the run before estimating the number of cartridges, since a changing profile uses a different amount of sealant.\u003c\/p\u003e\u003cp\u003ePrepare the whole area before opening the cartridge. The nozzle allows controlled placement along the gap, while a standard cartridge gun provides steady pressure as you work.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePack size is 310ml. The single-pack sealant is black.\u003c\/li\u003e\n\u003cli\u003eComposition is rubberised bitumen emulsion.\u003c\/li\u003e\n\u003cli\u003eMovement capability is approximately ±5%, as stated in the technical sheet.\u003c\/li\u003e\n\u003cli\u003eAllow approximately 24 hours to dry in dry conditions.\u003c\/li\u003e\n\u003cli\u003eGuide coverage is about 3m at a 10mm-wide × 10mm-deep section.\u003c\/li\u003e\n\u003cli\u003eThe technical sheet gives 5.3m at 10mm wide × 6mm deep, or 1m at 25mm wide × 12mm deep.\u003c\/li\u003e\n\u003cli\u003eShelf life is 24 months in an unopened cartridge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDirections for Use\u003c\/h3\u003e\u003cp\u003eCut the cartridge tip without damaging its thread. Trim the nozzle at 45 degrees and screw it securely onto the cartridge. Fit it into the skeleton gun and apply along the prepared crack or joint, controlling the flow so the gap is filled consistently.\u003c\/p\u003e\u003cp\u003eFollow the pack instructions for finishing and allow the sealant to dry before returning the repaired area to use. Keep food away during application and curing, and refer to the safety sheet for handling advice.\u003c\/p\u003e\u003ch3\u003eLimitations\u003c\/h3\u003e\u003cp\u003eAsphalt Easy Fill is unsuitable for EPDM rubber roofs. Check compatibility with other materials if uncertain. Store in shaded, dry conditions between 5°C and 25°C and protect from freezing.\u003c\/p\u003e\u003cp\u003eCoverage figures are guides to a consistent joint section. Make allowance for variations in depth and application waste when ordering. For larger broken-out asphalt defects, check the repair depths of \u003ca href=\"\/products\/watco-concrex-asphalt-repair\"\u003eConcrex Asphalt Repair\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat gun do I need?\u003c\/strong\u003e\u003cbr\u003eThe 310ml cartridge fits a standard skeleton or cartridge gun.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much will one cartridge cover?\u003c\/strong\u003e\u003cbr\u003eAllow about 3m at 10mm wide and 10mm deep. Smaller sections cover more length, and wider or deeper gaps consume more sealant.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it remain flexible?\u003c\/strong\u003e\u003cbr\u003eYes. It is a flexible rubberised bitumen sealant, with approximately ±5% movement capability stated in the technical sheet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long should it dry?\u003c\/strong\u003e\u003cbr\u003eAllow approximately 24 hours in dry conditions. Follow the pack instructions and check the repair before returning it to use.\u003c\/p\u003e\u003ch3\u003eData Sheets\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-joints-11nov-sheet-3.pdf?v=1794395437\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-joints-11nov-sheet-1.pdf?v=1794395437\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet (GB)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-joints-11nov-sheet-2.pdf?v=1794395437\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet (GBNI)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Watco","offers":[{"title":"310ml","offer_id":58277876171092,"sku":"AEFILL310","price":14.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-joints-easy-1.jpg?v=1794395460"},{"product_id":"watco-flexible-joint-repair","title":"Watco Flexible Joint Repair","description":"\u003cp\u003eWatco Flexible Joint Repair is a flexible polyurea mortar for damaged expansion joints in concrete floors. It fills the joint and adjoining broken concrete edges in one operation, helping restore a usable surface where repeated traffic has worn the joint shoulders away.\u003c\/p\u003e\u003cp\u003eThe grey satin repair combines flexibility with a tough surface for busy floor areas carrying forklifts and trolleys. It is trowelled into the prepared joint and can be used indoors or outside. Choose the repair width and depth carefully so the material fills the damaged profile within the limits in the technical sheet.\u003c\/p\u003e\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\u003cp\u003eRake loose material out of the joint. Remove oil, grease and contamination and leave the sides clean and dry. Mask the surrounding floor if neat edges are required.\u003c\/p\u003e\u003cp\u003eDeeper voids can be packed with suitable back-up rod or equivalent packing material. Aim to leave approximately 25mm for the repair. Where filling a joint and adjacent edge damage together, keep the overall repair width to a maximum of 100mm and retain at least 5mm depth.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePack size is 2.5L, comprising resin, curing agent and aggregate.\u003c\/li\u003e\n\u003cli\u003eComposition is a flexible polyurea mortar. Finish is grey satin.\u003c\/li\u003e\n\u003cli\u003eApplication temperature range is 10–30°C.\u003c\/li\u003e\n\u003cli\u003eWorking life is approximately one hour at 20°C.\u003c\/li\u003e\n\u003cli\u003eAt 20°C, allow eight hours for foot traffic and 24 hours for forklifts.\u003c\/li\u003e\n\u003cli\u003eGuide coverage is 12.5m at 20mm wide × 10mm deep, 2m at 50mm × 25mm, or 1m at 100mm × 25mm.\u003c\/li\u003e\n\u003cli\u003eStore between 10°C and 30°C.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDirections for Use\u003c\/h3\u003e\u003cp\u003eCombine the smaller tin with the larger tin and mix thoroughly with a wide-bladed tool. Scrape the sides and base so the liquid components are fully incorporated. Transfer the mixed liquid into the outer bucket and gradually add the aggregate while continuing to mix.\u003c\/p\u003e\u003cp\u003eUse the mixed mortar immediately. Trowel firmly into the joint and shape the surface level with the surrounding floor. Wiping the blade with a cloth dampened with white spirit helps the finishing process. If masking tape is used, Watco advises leaving it for about an hour before removal.\u003c\/p\u003e\u003ch3\u003eLimitations\u003c\/h3\u003e\u003cp\u003eThe minimum repair depth is 5mm. Using back-up material to control a deep joint helps make material consumption more predictable. Use the published joint dimensions when estimating yield and include the full width of damaged edges.\u003c\/p\u003e\u003cp\u003eLower temperatures extend the curing time. Keep forklift traffic off for the stated 24-hour period at 20°C and allow longer in colder conditions. Remove food products during application and curing, and follow the component safety sheets when handling and mixing.\u003c\/p\u003e\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan it repair the broken edges as well as the joint?\u003c\/strong\u003e\u003cbr\u003eYes. It fills the joint and adjacent joint edge damage together. Keep the overall repair width to 100mm maximum and the depth to at least 5mm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen can forklifts cross the repair?\u003c\/strong\u003e\u003cbr\u003eAt 20°C, allow 24 hours for forklifts. Foot traffic can resume after approximately eight hours. Lower temperatures extend these times.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much will one pack fill?\u003c\/strong\u003e\u003cbr\u003eA 2.5L pack covers approximately 12.5m at 20mm wide and 10mm deep, or 1m at 100mm wide and 25mm deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I control the depth of a deep joint?\u003c\/strong\u003e\u003cbr\u003eUse suitable back-up rod or similar packing, aiming to leave about 25mm for the repair while observing the minimum 5mm depth.\u003c\/p\u003e\u003ch3\u003eData Sheets\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-joints-11nov-sheet-10.pdf?v=1794395437\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-joints-11nov-sheet-4.pdf?v=1794395437\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Curing Agent (GB)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-joints-11nov-sheet-5.pdf?v=1794395437\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Resin (GB)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-joints-11nov-sheet-6.pdf?v=1794395437\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Aggregate (GB)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-joints-11nov-sheet-7.pdf?v=1794395437\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Resin (GBNI)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-joints-11nov-sheet-8.pdf?v=1794395437\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Curing Agent (GBNI)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-joints-11nov-sheet-9.pdf?v=1794395437\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Aggregate (GBNI)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Watco","offers":[{"title":"2.5L","offer_id":58277877940564,"sku":"FJR5","price":116.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-joints-flexjoint-1.jpg?v=1794395471"},{"product_id":"watco-floor-joint-sealant","title":"Watco Floor Joint Sealant","description":"\u003cp\u003eWatco Floor Joint Sealant is a pourable, two-part polyurea for sealing expansion joints, construction day joints and cracks in concrete floors. It provides a flexible joint with good compression and recovery, helping protect slab edges in regularly trafficked areas.\u003c\/p\u003e\u003cp\u003eUse it for joints up to 25mm wide in factory and warehouse floors, garages, car parks and forecourts. The mid-grey sealant suits indoor and outdoor work. Its wear and chemical resistance make it suitable for working floors where a correctly formed joint needs to accommodate movement.\u003c\/p\u003e\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\u003cp\u003eRemove loose material and contamination and leave the joint sides clean and dry. Repair spalled concrete edges first with a suitable \u003ca href=\"\/products\/watco-concrex-carbon-fibre-epoxy-repair-mortar\"\u003eConcrex repair mortar\u003c\/a\u003e. Use back-up rod to reduce deeper joints to the required depth, and mask the adjoining floor if needed.\u003c\/p\u003e\u003cp\u003eJoint proportions matter. For widths of 5–10mm, depth should equal width. For widths of 10–20mm, use a 10mm depth. Above 20mm wide, make the depth half the width, within the maximum 25mm joint width.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePack size is 2.5L. Colour is mid-grey.\u003c\/li\u003e\n\u003cli\u003eComposition is a two-part flexible polyurea sealant.\u003c\/li\u003e\n\u003cli\u003eNo primer is required for the specified clean concrete application.\u003c\/li\u003e\n\u003cli\u003eMinimum application temperature is 10°C.\u003c\/li\u003e\n\u003cli\u003eWorking life is approximately one hour at 20°C.\u003c\/li\u003e\n\u003cli\u003eSealed joints can accept traffic after approximately 8–12 hours. Full cure takes seven days.\u003c\/li\u003e\n\u003cli\u003ePublished guide coverage is approximately 12m at 15mm wide and 10mm deep.\u003c\/li\u003e\n\u003cli\u003eMovement accommodation is stated as +15% when sealed at the midpoint of joint movement.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDirections for Use\u003c\/h3\u003e\u003cp\u003eAdd the smaller tin to the larger tin and mix thoroughly for approximately three minutes with a wide-bladed tool or suitable slow-speed paddle. Scrape the sides and bottom, then transfer the mix into a clean pouring container. Mix again for one minute to incorporate all the components.\u003c\/p\u003e\u003cp\u003ePour evenly into the prepared joint, keeping the surface just below the surrounding floor. If necessary, use a flat blade to release trapped air. Remove masking tape before the sealant sets, drawing it across the joint so surplus falls into the joint rather than onto the floor.\u003c\/p\u003e\u003ch3\u003eLimitations\u003c\/h3\u003e\u003cp\u003eKeep the pack at 15–25°C for at least eight hours before use and protect from freezing. Allow the stated cure period before opening the area to traffic and distinguish this from the seven-day full cure.\u003c\/p\u003e\u003cp\u003eWatco advises checking compatibility before using on plastics or bituminous surfaces. Follow the technical sheet for the joint profile and application conditions, and remove food products from the area during application and cure.\u003c\/p\u003e\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat joint widths can it seal?\u003c\/strong\u003e\u003cbr\u003eUse it in concrete floor joints up to 25mm wide. Choose the depth according to the width guidance in the technical sheet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need a primer?\u003c\/strong\u003e\u003cbr\u003eNo primer is required on the specified clean, dry concrete substrate. Repair loose or spalled joint edges before sealing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen can the floor return to use?\u003c\/strong\u003e\u003cbr\u003eSealed joints can accept traffic after approximately 8–12 hours. Full cure takes seven days. Follow the technical sheet for site conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I pour straight from the mixing tin?\u003c\/strong\u003e\u003cbr\u003eWatco recommends transferring the mixed components into a clean pouring container and mixing again for one minute before filling the joint.\u003c\/p\u003e\u003ch3\u003eData Sheets\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-joints-11nov-sheet-15.pdf?v=1794395437\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-joints-11nov-sheet-11.pdf?v=1794395437\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Curing Agent (GB)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-joints-11nov-sheet-12.pdf?v=1794395437\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Resin (GB)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-joints-11nov-sheet-13.pdf?v=1794395437\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Curing Agent (GBNI)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-joints-11nov-sheet-14.pdf?v=1794395437\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Resin (GBNI)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Watco","offers":[{"title":"2.5L","offer_id":58277879644500,"sku":"FJSX1","price":93.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-joints-jointseal-1.jpg?v=1794395491"},{"product_id":"watco-flowpatch-asphalt-repair","title":"Watco Flowpatch Asphalt Repair","description":"\u003cp\u003eWatco Flowpatch Asphalt Repair is a pourable repair mortar for holes, dished areas and worn patches in asphalt and tarmac. Its fibre-reinforced polymer and cement blend mixes with water to form a slurry that flows into the prepared repair. It is suitable for car parks, loading areas, drives, paths and internal asphalt floors.\u003c\/p\u003e\u003cp\u003eApply it from 5mm to 100mm deep in one layer. The dark grey repair can accept heavy traffic after curing, making it a practical choice for maintenance in working areas. The flowable consistency is best suited to reasonably level surfaces where the material can settle into the damage.\u003c\/p\u003e\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\u003cp\u003eAsphalt and tarmac should be at least six months old. Brush out loose material, remove grease and oil, and leave a sound base. Damp surfaces are acceptable, but the area should not be saturated.\u003c\/p\u003e\u003cp\u003eCheck the depth across the repair and position the mixing container nearby. Have clean water, measuring containers and tools ready before mixing. The short working life means preparation and material placement need to follow closely together.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePack size is 25kg. The finished repair is dark grey.\u003c\/li\u003e\n\u003cli\u003eCoverage is approximately 0.5m² at 25mm thick.\u003c\/li\u003e\n\u003cli\u003eApplication depth is 5–100mm in one layer.\u003c\/li\u003e\n\u003cli\u003eMinimum application temperature is 5°C.\u003c\/li\u003e\n\u003cli\u003eMix one part water with three parts powder by volume.\u003c\/li\u003e\n\u003cli\u003eWorking life is approximately 5–10 minutes at 20°C.\u003c\/li\u003e\n\u003cli\u003eAbove 15°C, allow 30–60 minutes for foot traffic and 2–3 hours for cars, lorries and forklifts.\u003c\/li\u003e\n\u003cli\u003eAt 5°C, the technical sheet advises allowing 24 hours.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDirections for Use\u003c\/h3\u003e\u003cp\u003eMeasure the water into a suitable container, then gradually add the powder while stirring. Mix until the colour is even and the consistency is smooth and pourable. Prepare only as much as can be placed within a few minutes.\u003c\/p\u003e\u003cp\u003ePour into the prepared damage and use a trowel if necessary to distribute the mix. Full strength is achieved at 5mm, with feathering limited to the repair perimeter. For damage deeper than 100mm, build in layers no thicker than 100mm and allow 12 hours between layers. Wash tools with water before the mortar dries.\u003c\/p\u003e\u003ch3\u003eLimitations\u003c\/h3\u003e\u003cp\u003eKeep traffic off until the repair has cured for the conditions on site. Lower temperatures extend curing, so account for both temperature and the repair profile when scheduling reopening.\u003c\/p\u003e\u003cp\u003eStore unopened material in dry, frost-free conditions and use within its 12-month shelf life. Actual coverage varies with depth and the shape of the damage. Read the technical sheet and safety information before mixing.\u003c\/p\u003e\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I apply it to damp asphalt?\u003c\/strong\u003e\u003cbr\u003eYes, provided the surface is damp rather than saturated and is sound, clean and free from contamination.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow deep can I fill in one layer?\u003c\/strong\u003e\u003cbr\u003eApply from 5mm to 100mm. For deeper holes, use layers no thicker than 100mm and allow 12 hours between layers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen can vehicles use the repair?\u003c\/strong\u003e\u003cbr\u003eAbove 15°C, allow approximately 2–3 hours for cars, lorries and forklifts. At 5°C, allow 24 hours as a guide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much water should I add?\u003c\/strong\u003e\u003cbr\u003eMix one part water with three parts powder by volume, following the pack instructions. Add the powder gradually and use the mixed material immediately.\u003c\/p\u003e\u003ch3\u003eData Sheets\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-flow-11nov-sheet-3.pdf?v=1794395922\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-flow-11nov-sheet-1.pdf?v=1794395921\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet (GB)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-flow-11nov-sheet-2.pdf?v=1794395921\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet (GBNI)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Watco","offers":[{"title":"25kg","offer_id":58278213648724,"sku":"XFPAR25NC","price":162.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-next-flow-1.jpg?v=1794395911"},{"product_id":"watco-flowtop","title":"Watco Flowtop","description":"\u003cp\u003eWatco Flowtop is a fibre-reinforced topping for resurfacing rough, worn or damaged interior concrete. It pours and spreads over the prepared floor to create a smooth, non-dusting working surface for warehouses, production areas, workshops and showrooms.\u003c\/p\u003e\u003cp\u003eNormally laid at 3mm, the resurfacer can be increased to 15mm over more uneven areas. It can be left as an industrial finish or painted with a compatible coating after curing. Mid Grey, Tile Red, Stone, Blue and Green options allow you to choose a finish to suit the area.\u003c\/p\u003e\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\u003cp\u003eRemove loose surface material and heavy oil or grease contamination. Remove poorly bonded paint or sealer, and check the technical guidance where coatings remain. Flowtop is intended for rough or damaged concrete, rather than very smooth or powerfloated floors.\u003c\/p\u003e\u003cp\u003eTwo primers are included. Dampen bare concrete with clean water and leave for 20–30 minutes. Brush on Primer 1 and allow at least 15–20 minutes to soak in. Apply Primer 2 as a thin, even film, avoiding puddles. Place Flowtop while Primer 2 is wet.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePack size is 25kg, including powder, resin and two primers.\u003c\/li\u003e\n\u003cli\u003eComposition is fibre-reinforced cement-based powder mixed with resin at use.\u003c\/li\u003e\n\u003cli\u003eCoverage is approximately 3.7m² at 3mm, 2.3m² at 5mm or 1.1m² at 10mm.\u003c\/li\u003e\n\u003cli\u003eNormal application depth is 3–15mm.\u003c\/li\u003e\n\u003cli\u003eUse within the product page’s 10–30°C application range.\u003c\/li\u003e\n\u003cli\u003eAt 15–20°C and normal depths, allow about six hours for light traffic and 24–36 hours for full use.\u003c\/li\u003e\n\u003cli\u003eShelf life is 12 months unopened.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDirections for Use\u003c\/h3\u003e\u003cp\u003eMix the complete powder and resin pack with a slow-speed drill and mixing blade until the colour is even and the consistency is creamy, normally taking 3–5 minutes. For coloured grades, follow the pack instructions for adding the pigment and water.\u003c\/p\u003e\u003cp\u003ePour over the wet second primer and spread to the chosen thickness with a rectangular trowel. Immediately work a spiked roller across the area in different directions to release air and improve the finish. Stop rolling as the material begins to set, and within 20 minutes of application. Clean tools with water before the material cures.\u003c\/p\u003e\u003ch3\u003eLimitations\u003c\/h3\u003e\u003cp\u003eColour can vary with the cement and site conditions. Where a uniform decorative appearance is essential, consider a suitable coating. Water-based epoxy coatings can generally be applied after 24–36 hours, while non-water-based coatings require seven days. Check compatibility and avoid strong solvents such as xylene.\u003c\/p\u003e\u003cp\u003eAvoid sugar-contaminated substrates. Condition the pack at 15–25°C for eight hours before use and protect from freezing. Lower temperatures extend curing.\u003c\/p\u003e\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eAre the primers included?\u003c\/strong\u003e\u003cbr\u003eYes. Flowtop includes two primers. Follow their sequence and apply the mixed topping over wet Primer 2.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much floor will one pack cover?\u003c\/strong\u003e\u003cbr\u003eApproximately 3.7m² at 3mm, 2.3m² at 5mm or 1.1m² at 10mm. Consumption increases with thickness and surface profile.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it take industrial traffic?\u003c\/strong\u003e\u003cbr\u003eYes. It is designed for industrial wear, including pallet and forklift trucks. Allow 24–36 hours for full use at 15–20°C and normal 3–5mm depths.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I paint Flowtop?\u003c\/strong\u003e\u003cbr\u003eYes, with a compatible coating. Allow 24–36 hours for suitable water-based epoxy coatings or seven days for non-water-based products, following the technical sheet.\u003c\/p\u003e\u003ch3\u003eData Sheets\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-flow-11nov-sheet-13.pdf?v=1794395922\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-flow-11nov-sheet-4.pdf?v=1794395922\" target=\"_blank\" rel=\"noopener\"\u003eApplication Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-flow-11nov-sheet-5.pdf?v=1794395922\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Additive Solution (GB)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-flow-11nov-sheet-6.pdf?v=1794395922\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Powder Blend (GB)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-flow-11nov-sheet-7.pdf?v=1794395921\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Primer 1 (GB)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-flow-11nov-sheet-8.pdf?v=1794395922\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Primer 2 (GB)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-flow-11nov-sheet-9.pdf?v=1794395922\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Additive Solution (GBNI)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-flow-11nov-sheet-10.pdf?v=1794395922\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Powder Blend (GBNI)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-flow-11nov-sheet-11.pdf?v=1794395922\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Primer 1 (GBNI)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-flow-11nov-sheet-12.pdf?v=1794395922\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Primer 2 (GBNI)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Watco","offers":[{"title":"Mid Grey \/ 25kg","offer_id":58278213747028,"sku":"XFTOP25NC","price":109.4,"currency_code":"GBP","in_stock":true},{"title":"Tile Red \/ 25kg","offer_id":58278213779796,"sku":"XFTOP25NCTRD","price":132.5,"currency_code":"GBP","in_stock":true},{"title":"Stone \/ 25kg","offer_id":58278213812564,"sku":"XFTOP25NCBUF","price":132.5,"currency_code":"GBP","in_stock":true},{"title":"Blue \/ 25kg","offer_id":58278213845332,"sku":"XFTOP25NCBLU","price":132.5,"currency_code":"GBP","in_stock":true},{"title":"Green \/ 25kg","offer_id":58278213878100,"sku":"XFTOP25NCGRN","price":132.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-next-top-1.jpg?v=1794395931"},{"product_id":"watco-back-up-rod","title":"Watco Back Up Rod","description":"\u003cp\u003eWatco Back Up Rod is a joint packer for deep floor expansion joints. Push it into the prepared gap before applying the joint sealant to reduce the volume of sealant required and help establish the intended filling depth.\u003c\/p\u003e\u003cp\u003eThe rod is easy to cut and fit along a joint. It complements \u003ca href=\"\/products\/watco-floor-joint-sealant\"\u003eWatco Floor Joint Sealant\u003c\/a\u003e and can also be used as packing where specified for \u003ca href=\"\/products\/watco-flexible-joint-repair\"\u003eWatco Flexible Joint Repair\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\u003cp\u003eClean the joint and remove loose material and contamination in accordance with the repair product’s instructions. Check the width and the required sealant depth before positioning the backing rod. Repair damaged concrete edges where the chosen joint system requires it.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSupplied length is 10m.\u003c\/li\u003e\n\u003cli\u003eNominal rod diameter is 15mm.\u003c\/li\u003e\n\u003cli\u003eUsed as packing in deep expansion joints before sealing.\u003c\/li\u003e\n\u003cli\u003eThe supplied colour may be white or grey, depending on availability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDirections for Use\u003c\/h3\u003e\u003cp\u003eCut the required length and push the rod into the joint to leave the depth specified for the sealant or repair mortar. Check that the backing follows the joint consistently, then apply the chosen joint product according to its instructions.\u003c\/p\u003e\u003cp\u003eThe required depth depends on the joint width and the product being applied. Use the supporting application guidance below when planning the joint profile and quantity of sealant.\u003c\/p\u003e\u003ch3\u003eLimitations\u003c\/h3\u003e\u003cp\u003eSelect backing suitable for the joint dimensions and follow the depth guidance for the accompanying sealant. The rod is a packing accessory and the finished joint requires the specified sealing or repair material.\u003c\/p\u003e\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size is supplied?\u003c\/strong\u003e\u003cbr\u003eThe listed size is a 10m length with a nominal 15mm diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is it used for?\u003c\/strong\u003e\u003cbr\u003eIt packs deep expansion joints before sealing, reducing the amount of sealant needed and helping control the filling depth.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich Watco products does it complement?\u003c\/strong\u003e\u003cbr\u003eIt is used with Floor Joint Sealant and as packing where specified for Flexible Joint Repair. Follow the application sheet for your chosen product.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the rod be white or grey?\u003c\/strong\u003e\u003cbr\u003eWatco states that either white or grey may be supplied, depending on availability.\u003c\/p\u003e\u003ch3\u003eData Sheets\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-joints-11nov-sheet-10.pdf?v=1794395437\" target=\"_blank\" rel=\"noopener\"\u003eFlexible Joint Repair – Supporting Application Guidance\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-joints-11nov-sheet-15.pdf?v=1794395437\" target=\"_blank\" rel=\"noopener\"\u003eFloor Joint Sealant – Supporting Application Guidance\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Watco","offers":[{"title":"10m × 15mm","offer_id":58278214009172,"sku":"BUR15","price":9.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-next-rod-1.jpg?v=1794395961"},{"product_id":"watco-bio-d","title":"Watco Bio-D","description":"\u003cp\u003eWatco Bio-D is a biodegradable, water based degreaser for removing oil, grease and everyday dirt from concrete floors before painting. Its penetrating formulation lifts contamination from porous surfaces, helping you prepare workshop, warehouse and garage floors for a suitable primer or floor coating.\u003c\/p\u003e\n\u003cp\u003eUse it neat for heavily soiled areas or dilute it for lighter cleaning and routine floor maintenance. The low odour, virtually solvent free formula suits indoor and outdoor work, including bare concrete, asphalt, brickwork, blockwork and sand and cement screeds. It can also clean existing painted floors using the appropriate dilution and a soft broom.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConcentrated cleaner for floor preparation and ongoing maintenance.\u003c\/li\u003e\n\u003cli\u003eBiodegradable formulation; rinse thoroughly after use.\u003c\/li\u003e\n\u003cli\u003eWorks with a broom or mechanical scrubbing machine.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\u003cp\u003eSweep away loose dirt and remove excess deposits before cleaning. Heavily contaminated floors should be reasonably dry so the cleaner can work effectively. Use a stiff broom on bare concrete and a soft broom or suitable scrubber on painted surfaces. Check compatibility on an inconspicuous area of existing finishes.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eComposition\u003c\/th\u003e\n\u003ctd\u003eSingle pack, water based degreaser\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack sizes\u003c\/th\u003e\n\u003ctd\u003e5L and 25L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior and exterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e24 months unopened\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003eProtect from frost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eCoverage\u003c\/h3\u003e\u003cp\u003eAllow approximately 20m² per 5L or 100m² per 25L for heavy contamination (4m²\/L). Consumption varies with the deposits and surface texture. For lighter contamination before painting, the technical sheet permits up to five parts water to one part cleaner; maintenance dilution can be up to ten parts water.\u003c\/p\u003e\u003ch3\u003eDirections for Use\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eShake the container. Brush undiluted cleaner into heavily soiled areas and scrub thoroughly.\u003c\/li\u003e\n\u003cli\u003eLeave for at least 15 minutes, then scrub again to loosen contamination.\u003c\/li\u003e\n\u003cli\u003eRinse with clean, cold water while continuing to agitate the surface. Repeat if necessary once the floor is reasonably dry.\u003c\/li\u003e\n\u003cli\u003eBefore applying a primer or coating, remove all cleaner residue and allow the floor to dry thoroughly to that coating's requirements.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eLimitations\u003c\/h3\u003e\u003cp\u003eCollect oil-contaminated wash water and dispose of it appropriately; it must not enter sewers, rainwater drains or watercourses. Biodegradability does not make contaminated washings suitable for disposal down a drain. Read the safety sheet and avoid allowing the product to freeze.\u003c\/p\u003e\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan Bio-D be diluted?\u003c\/strong\u003e\u003cbr\u003eYes. Use neat for heavy deposits, up to five parts water for lighter pre-paint cleaning, or up to ten parts water for routine maintenance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much floor will it clean?\u003c\/strong\u003e\u003cbr\u003eApproximately 20m² per 5L or 100m² per 25L on heavy contamination. Surface condition and the amount of dirt affect consumption.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I clean a painted floor?\u003c\/strong\u003e\u003cbr\u003eYes, using a suitable dilution and soft broom or scrubber. Check compatibility with the existing coating first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen can I paint after cleaning?\u003c\/strong\u003e\u003cbr\u003eOnce all cleaner and contamination have been rinsed away and the floor is thoroughly dry to the primer or coating specification.\u003c\/p\u003e\u003ch3\u003eData Sheets\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-uk_tds_bio_d_01_23.pdf?v=1794397456\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-Bio_D__GBNI_EN__6_00__30_11_2024.pdf?v=1794397454\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet (GBNI)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-Bio_D__GB_EN__6_00__30_11_2024.pdf?v=1794397454\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet (GB)\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"5L","offer_id":58279521976660,"sku":"BIOD05","price":27.6,"currency_code":"GBP","in_stock":true},{"title":"25L","offer_id":58279522009428,"sku":"BIOD25","price":124.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-bio-bio_d.jpg?v=1794397398"},{"product_id":"watco-concroff","title":"Watco Concroff","description":"\u003cp\u003eWatco Concroff is a powerful water based degreaser for heavily contaminated bare floors. It lifts stubborn oil, grease and ingrained dirt from concrete and other suitable unsealed surfaces, making it a practical preparation cleaner for garages, engineering workshops, factories and maintenance areas.\u003c\/p\u003e\n\u003cp\u003eWhere oily deposits have built up over time, painting directly over them can compromise the coating system. Concroff helps remove this contamination before the next stage of floor preparation. Its concentrated, solvent free formulation is worked into the surface, allowed to penetrate, then scrubbed and rinsed away. It can also be used on suitable machinery, with water-sensitive components protected.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHeavy duty cleaning for bare concrete and other compatible unsealed surfaces.\u003c\/li\u003e\n\u003cli\u003eWater based, low odour formulation.\u003c\/li\u003e\n\u003cli\u003eSuitable for interior and exterior preparation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\u003cp\u003eRemove loose dirt and scrape away thick deposits of grease first. Floors must be dry before treatment for the cleaner to work most effectively. Protect surrounding materials and equipment. This is a preparation product for bare surfaces: do not apply it to an existing painted or sealed floor.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eComposition\u003c\/th\u003e\n\u003ctd\u003eSingle pack, water based degreaser\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack size\u003c\/th\u003e\n\u003ctd\u003e5L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eStiff broom or mechanical scrubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior and exterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e24 months unopened\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eCoverage\u003c\/h3\u003e\u003cp\u003eA 5L container treats approximately 20m² of heavily contaminated floor (4m²\/L). The actual area depends on surface texture and the extent of contamination. Stubborn deposits may need another application.\u003c\/p\u003e\u003ch3\u003eDirections for Use\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eBrush undiluted Concroff into the dry floor and scrub thoroughly. A small amount of water may help spreading, but excessive dilution reduces effectiveness.\u003c\/li\u003e\n\u003cli\u003eLeave for at least 15 minutes to penetrate the deposits, then scrub again with a stiff broom or mechanical scrubber.\u003c\/li\u003e\n\u003cli\u003eRinse thoroughly with clean, cold water while agitating the floor. Collect contaminated washings.\u003c\/li\u003e\n\u003cli\u003eRepeat on persistent contamination after the surface is reasonably dry. Before painting, allow the cleaned floor to dry thoroughly.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eLimitations\u003c\/h3\u003e\u003cp\u003eDo not use on previously painted or sealed surfaces: this strong cleaner can stain or soften the finish. Protect from freezing. Prevent oil-contaminated washings entering drains, sewers and watercourses; collect and dispose of them as appropriate chemical waste. For machinery, follow the technical sheet and keep rinse water away from sensitive parts.\u003c\/p\u003e\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs Concroff suitable for painted floors?\u003c\/strong\u003e\u003cbr\u003eNo. The technical sheet excludes painted and sealed surfaces because the cleaner may stain or soften them.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould the floor be wet before cleaning?\u003c\/strong\u003e\u003cbr\u003eNo. Start with a dry floor and use the cleaner undiluted for heavy contamination. A little water can aid spreading, but too much reduces effectiveness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does one container cover?\u003c\/strong\u003e\u003cbr\u003eApproximately 20m² per 5L for heavy contamination. Repeated treatment may be needed for persistent deposits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I paint straight after rinsing?\u003c\/strong\u003e\u003cbr\u003eAllow all cleaner residue to be removed and the floor to dry thoroughly before applying a compatible primer or coating.\u003c\/p\u003e\u003ch3\u003eData Sheets\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-uk_tds_concroff_01_23.pdf?v=1794397455\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-concroff_gb.pdf?v=1794397454\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet (GB)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-concroff__new__gbni.pdf?v=1794397455\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet (GBNI)\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"5L","offer_id":58279525843284,"sku":"CROFSS5","price":36.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-con-concroff.jpg?v=1794397409"},{"product_id":"watco-etch-clean","title":"Watco Etch \u0026 Clean","description":"\u003cp\u003eWatco Etch \u0026amp; Clean prepares bare, porous concrete floors for painting by combining an acid etchant with water based cleaning agents. It removes surface laitance - the weak, powdery cement film that can interfere with adhesion - while helping clean light dirt and contamination from the floor.\u003c\/p\u003e\n\u003cp\u003eA sound concrete surface gives a compatible floor coating a better base to bond to. Etch \u0026amp; Clean is useful during garage, workshop and warehouse floor preparation where the concrete needs etching before its specified primer or paint system. The formulation changes from pink to white or clear as it reacts, giving a visible guide during treatment. Heavy oil and grease should be removed separately with an appropriate degreaser first.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCombined concrete etching and cleaning treatment.\u003c\/li\u003e\n\u003cli\u003eHelps remove weak surface laitance before painting.\u003c\/li\u003e\n\u003cli\u003eColour change indicates the reaction during application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\n\u003cp\u003eSweep away debris. Degrease heavily contaminated areas with Watco Concroff, rinse and allow to dry before etching. Slightly dampen exceptionally porous concrete to prevent excessive immediate absorption. Protect machinery, surrounding finishes and vulnerable metal from splashes and corrosive fumes.\u003c\/p\u003e\n\u003ch3\u003eTechnical Data\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eComposition\u003c\/th\u003e\n\u003ctd\u003eHydrochloric acid based etchant with water based degreasers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack size\u003c\/th\u003e\n\u003ctd\u003e5L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuitable substrate\u003c\/th\u003e\n\u003ctd\u003eBare, porous concrete\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior and exterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e24 months unopened\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCoverage\u003c\/h3\u003e\n\u003cp\u003eApply no more than 20m² per 5L (4m²\/L). Concrete condition can affect consumption and repeat treatment may be necessary where laitance remains.\u003c\/p\u003e\n\u003ch3\u003eDirections for Use\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eDistribute over the prepared concrete and scrub vigorously with a suitable broom or scrubbing machine.\u003c\/li\u003e\n\u003cli\u003eLeave for approximately 15 minutes, until frothing stops and the pink formulation turns white or clear.\u003c\/li\u003e\n\u003cli\u003eFlush with generous quantities of clean water to remove every trace of the product. Allow the floor to dry thoroughly.\u003c\/li\u003e\n\u003cli\u003eBrush and vacuum away loosened particles. Scrape the surface with a coin: if powdery laitance still comes away easily, repeat treatment before painting.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eLimitations\u003c\/h3\u003e\n\u003cp\u003eUse only on bare porous concrete. Do not apply to painted or sealed floors, sand and cement screeds, self-levelling compounds or rust-prone bare metal. For new concrete, follow the intended coating's drying requirements: the technical sheet guides four weeks in summer or six in winter for water based coatings, and eight weeks for polyaspartic or high build systems. Read the safety sheet before handling.\u003c\/p\u003e\n\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is concrete laitance?\u003c\/strong\u003e\u003cbr\u003eIt is a weak, powdery cement-rich layer on the concrete surface. Removing it helps create a sound base for the specified coating system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it on a painted floor?\u003c\/strong\u003e\u003cbr\u003eNo. Etch \u0026amp; Clean is intended for bare porous concrete and is unsuitable for painted or sealed surfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I know treatment is complete?\u003c\/strong\u003e\u003cbr\u003eWait for frothing to stop and the pink colour to change to white or clear, then rinse thoroughly. After drying, repeat if a coin still easily scrapes off powdery laitance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it remove heavy oil deposits?\u003c\/strong\u003e\u003cbr\u003eHeavy oil and grease should be removed with a suitable degreaser before etching, followed by thorough rinsing and drying.\u003c\/p\u003e\n\u003ch3\u003eData Sheets\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-uk_tds_etch_and_clean_01_23.pdf?v=1794397455\" rel=\"noopener\" target=\"_blank\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-Etch___Clean__GB_EN__6_00__30_11_2024.pdf?v=1794397454\" rel=\"noopener\" target=\"_blank\"\u003eSafety Data Sheet (GB)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-Etch___Clean__GBNI_EN__6_00__30_11_2024.pdf?v=1794397455\" rel=\"noopener\" target=\"_blank\"\u003eSafety Data Sheet (GBNI)\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"5L","offer_id":58279526170964,"sku":"EC5","price":41.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-etch-etch_and_clean.jpg?v=1794397427"},{"product_id":"watco-new-concrete-primer","title":"Watco New Concrete Primer","description":"\u003cp\u003eWatco New Concrete Primer is a two part epoxy primer that allows suitable newly laid concrete floors to be coated while they still contain construction moisture. It forms a barrier against moisture vapour at up to 98% relative humidity, helping reduce the waiting time normally needed before painting new industrial floors.\u003c\/p\u003e\n\u003cp\u003eThe virtually solvent free, high solids formulation penetrates prepared concrete and provides a base for compatible Watco floor coatings. It is designed for interior concrete and sand and cement surfaces where residual moisture would otherwise restrict the choice of floor paint. Its dark grey finish also makes it easier to inspect coverage and identify missed areas before applying the topcoat.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMoisture-tolerant primer for new concrete, up to 98% RH.\u003c\/li\u003e\n\u003cli\u003eTwo component, 100% solids epoxy formulation.\u003c\/li\u003e\n\u003cli\u003eUsually one full coat on sound, reasonably good quality concrete.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\n\u003cp\u003eThe floor must be sound and free of dust, contamination and weak material. Mechanical preparation, such as shot blasting or scarifying, is preferred; vacuum thoroughly afterwards. Smooth power floated concrete needs suitable mechanical preparation. Switch off underfloor heating at least two days before application and leave it off for at least two days afterwards, then raise the temperature gradually.\u003c\/p\u003e\n\u003ch3\u003eTechnical Data\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePack size \/ colour\u003c\/th\u003e\n\u003ctd\u003e8kg \/ Dark Grey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior concrete and sand and cement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMoisture tolerance\u003c\/th\u003e\n\u003ctd\u003eUp to 98% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum conditions\u003c\/th\u003e\n\u003ctd\u003eAir 15°C; floor 10°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePot life\u003c\/th\u003e\n\u003ctd\u003e1 hour at 15°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e6 months unopened\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCoverage\u003c\/h3\u003e\n\u003cp\u003eAllow approximately 20–25m² per 8kg at a wet film thickness of 250 microns. The calculator uses the conservative 20m² rate (2.5m²\/kg). Porous or open-textured concrete may need more material or a second coat.\u003c\/p\u003e\n\u003ch3\u003eDirections for Use\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eCombine the complete resin and curing agent pack and mix thoroughly, scraping the sides and base. Do not leave mixed material standing in the container: decant immediately into a roller tray.\u003c\/li\u003e\n\u003cli\u003eWork into the prepared surface with a medium pile roller, using a brush at edges. Aim for a continuous coat without pinholes or missed patches.\u003c\/li\u003e\n\u003cli\u003eInspect after drying and apply another coat where needed to achieve a complete moisture barrier.\u003c\/li\u003e\n\u003cli\u003eAt 15°C, allow 16 hours before a compatible 100% solids Watco topcoat; water based coatings require 24–48 hours. Lightly abrade if more than 4–5 days elapse before overcoating.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eLimitations\u003c\/h3\u003e\n\u003cp\u003eThis primer needs a suitable finish and correct preparation. A single coat may not seal highly porous concrete completely. Screed or repair overlays can require two coats with a sand-blinded second coat: follow the technical sheet for the full system. Store at 15–25°C for at least eight hours before use and protect from frost. Mixed epoxy generates heat, so transfer it promptly to a tray.\u003c\/p\u003e\n\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used on new concrete?\u003c\/strong\u003e\u003cbr\u003eYes. It is designed to suppress construction moisture in suitable new concrete at up to 98% RH before a compatible floor coating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much does a pack cover?\u003c\/strong\u003e\u003cbr\u003eApproximately 20–25m² per 8kg at 250 microns. More material may be required on porous or open-textured surfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen can I apply the topcoat?\u003c\/strong\u003e\u003cbr\u003eAt 15°C allow 16 hours for compatible 100% solids Watco coatings, or 24–48 hours for water based coatings. Check the complete coating specification.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs one coat enough?\u003c\/strong\u003e\u003cbr\u003eUsually on sound, good quality concrete. Inspect for pinholes and missed patches; additional coats may be needed to form a continuous barrier.\u003c\/p\u003e\n\u003ch3\u003eData Sheets\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-new_concrete_primer_tds.pdf?v=1794397455\" rel=\"noopener\" target=\"_blank\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-new_concrete_primer_curing_agent_gb.pdf?v=1794397455\" rel=\"noopener\" target=\"_blank\"\u003eSafety Data Sheet – Curing Agent (GB)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-new_concrete_primer_resin_gb.pdf?v=1794397455\" rel=\"noopener\" target=\"_blank\"\u003eSafety Data Sheet – Resin (GB)\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"8kg","offer_id":58279527940436,"sku":"NCPDGY8","price":185.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-new-new_concrete_primer_bucket.png?v=1794397445"},{"product_id":"watco-oil-block-primer","title":"Watco Oil Block Primer","description":"\u003cp\u003eWatco Oil Block Primer helps prepare oil-contaminated, porous concrete for a suitable heavy duty epoxy floor coating. Its penetrating two part epoxy formulation is intended for residual mineral oil contamination that remains after thorough cleaning, such as on workshop and garage floors that have absorbed oil over time.\u003c\/p\u003e\n\u003cp\u003eGood preparation still matters: remove as much contamination as possible before priming. The primer helps address deep-seated residues that conventional cleaning alone may struggle to remove, creating a base for a compatible 100% solids epoxy finish. It stains the substrate black and must be overcoated; it is a preparation stage rather than a finished wearing surface.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpecialist primer for residual mineral oil in porous substrates.\u003c\/li\u003e\n\u003cli\u003eSolvent based, two component epoxy resin.\u003c\/li\u003e\n\u003cli\u003eBrush application helps work the primer into the floor.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\u003cp\u003eScrape or grind away as much oil and contamination as possible. Degrease with a suitable cleaner such as Watco Concroff, rinse away all traces of cleaner and allow the surface to dry. The substrate must be sound and porous. Do not use the primer as a shortcut over loose dirt, pools of oil or inadequately cleaned deposits.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePack size\u003c\/th\u003e\n\u003ctd\u003e4L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack stain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum application temperature\u003c\/th\u003e\n\u003ctd\u003e10°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePot life\u003c\/th\u003e\n\u003ctd\u003e30 minutes at 20°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e24 months unopened\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eCoverage\u003c\/h3\u003e\u003cp\u003eThe current product page gives approximately 16m² per 4L (4m²\/L). The technical sheet gives a broader 15–20m² range depending on the substrate. Apply a full coat around 250 microns wet film thickness and do not exceed the specified 350 micron maximum.\u003c\/p\u003e\u003ch3\u003eDirections for Use\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003ePour all resin and curing agent into the clean outer container. Mix thoroughly with a wide bladed stirrer, scraping the base and sides.\u003c\/li\u003e\n\u003cli\u003eTransfer to another suitable vessel or roller tray and apply promptly within the pot life.\u003c\/li\u003e\n\u003cli\u003eBrush one good coat well into the surface. If using a medium pile roller, work backwards and forwards to promote penetration.\u003c\/li\u003e\n\u003cli\u003eOvercoat with a suitable 100% solids epoxy after approximately 16 hours and within 24 hours. If this window is exceeded, abrade to provide a key before coating.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eLimitations\u003c\/h3\u003e\u003cp\u003eIntended for mineral oil residues; it is not normally suitable for vegetable oil contamination. Do not use on metal, previously painted or non-porous surfaces. Avoid conventional single pack floor paints or most water based acrylics that could be softened by oil. The product contains flammable solvent: provide suitable ventilation and follow both component safety sheets. Store cool and dry, away from ignition sources, and protect from frost.\u003c\/p\u003e\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan it replace degreasing?\u003c\/strong\u003e\u003cbr\u003eNo. Remove as much oil as possible, degrease, rinse and dry before priming. The product is intended to help with residual deep-seated mineral oil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I leave it as the final floor finish?\u003c\/strong\u003e\u003cbr\u003eNo. Oil Block Primer is not a wearing surface and needs a compatible topcoat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich type of topcoat is required?\u003c\/strong\u003e\u003cbr\u003eThe technical sheet specifies a suitable 100% solids epoxy coating. Do not use oil-sensitive conventional single pack floor paint or most water based acrylics.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should I overcoat?\u003c\/strong\u003e\u003cbr\u003eApproximately 16–24 hours after priming under suitable conditions. If more than 24 hours has elapsed, abrade the primer to form a key.\u003c\/p\u003e\u003ch3\u003eData Sheets\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-oil_block_primer_tds.pdf?v=1794397455\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-oil_block_primer_resin_gb.pdf?v=1794397455\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Resin (GB)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-oil_block_primer_curing_agent_gb.pdf?v=1794397455\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Curing Agent (GB)\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"4L","offer_id":58279531020628,"sku":"OPP4","price":112.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-oil-oil_block_primer.jpg?v=1794397462"},{"product_id":"watco-powerfloat-primer","title":"Watco Powerfloat Primer","description":"\u003cp\u003eWatco Powerfloat Primer is a two part, water based epoxy primer for smooth concrete floors that can be difficult to paint. It provides an adhesion-promoting base on suitably prepared power floated and other low-porosity concrete, helping a compatible floor coating bond to a surface that may otherwise reject paint.\u003c\/p\u003e\n\u003cp\u003eThis low odour, virtually solvent free primer is useful in warehouses, workshops and commercial interiors where dense concrete needs preparing before a floor coating. A single roller-applied coat is normally required. Choose Light Grey beneath a coloured finish or Clear where the planned coating system calls for a transparent primer. Mechanical preparation remains Watco's preferred approach where practical; this primer is particularly helpful where access makes that work difficult.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdhesion primer for smooth, dense concrete floors indoors.\u003c\/li\u003e\n\u003cli\u003eClear and Light Grey options.\u003c\/li\u003e\n\u003cli\u003eOne coat normally covers up to 30m².\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\n\u003cp\u003eRemove loose material, dust, grease and contamination. Degrease where needed, rinse away cleaner and allow the floor to dry. Remove laitance with an appropriate preparation method. Allow new concrete at least four weeks in suitable summer conditions, or six weeks in winter, and follow the chosen topcoat's moisture requirements. Existing paint must be sound, well bonded and suitably prepared.\u003c\/p\u003e\n\u003ch3\u003eTechnical Data\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePack size\u003c\/th\u003e\n\u003ctd\u003e5L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColours\u003c\/th\u003e\n\u003ctd\u003eClear or Light Grey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eComposition\u003c\/th\u003e\n\u003ctd\u003eTwo part, water based epoxy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum conditions\u003c\/th\u003e\n\u003ctd\u003eAir 15°C; floor 10°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePot life\u003c\/th\u003e\n\u003ctd\u003eUp to 2 hours at 20°C; apply promptly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e24 months unopened\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCoverage\u003c\/h3\u003e\n\u003cp\u003eAllow approximately 30m² per 5L per coat (6m²\/L). Apply evenly at the specified rate; do not spread too thinly or leave a heavy film. Surface texture can affect consumption.\u003c\/p\u003e\n\u003ch3\u003eDirections for Use\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eStir each component separately, then combine the complete contents in the outer container. Mix to an even colour and consistency, scraping the sides and base.\u003c\/li\u003e\n\u003cli\u003eApply one coat with a medium pile roller, working well into the surface. Cut in at edges with a brush and provide good ventilation.\u003c\/li\u003e\n\u003cli\u003eAt 15–20°C, the current product guidance gives a 16–72 hour window before compatible epoxy or polyaspartic finishes.\u003c\/li\u003e\n\u003cli\u003eAllow at least five days before Watco Concrete Floor Paint, Flexicoat or Safety Grip Flex. Check the topcoat specification and the latest application guidance before coating.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eLimitations\u003c\/h3\u003e\n\u003cp\u003eFor interior use. Not suitable for bare metal, and most self-levelling compounds require specific advice before painting. Overcoating times depend on temperature, ventilation and coating type; slower solvent-containing finishes need the longer interval. If the permitted overcoating window is exceeded, obtain system advice and abrade as specified. Condition material at 15–25°C for at least eight hours before use and protect from frost.\u003c\/p\u003e\n\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is Powerfloat Primer for?\u003c\/strong\u003e\u003cbr\u003eIt helps a compatible floor coating adhere to suitably prepared smooth, dense or power floated concrete indoors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it remove the need for cleaning?\u003c\/strong\u003e\u003cbr\u003eNo. Remove contamination and loose material and prepare the floor correctly. Watco recommends mechanical preparation where practical.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich colours are available?\u003c\/strong\u003e\u003cbr\u003eClear and Light Grey. Select the colour suited to the intended finish and coating system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen can I apply the floor paint?\u003c\/strong\u003e\u003cbr\u003eCurrent guidance gives 16–72 hours for compatible epoxy or polyaspartic finishes at 15–20°C. Concrete Floor Paint, Flexicoat and Safety Grip Flex require at least five days.\u003c\/p\u003e\n\u003ch3\u003eData Sheets\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-powerfloat_primer.pdf?v=1794397455\" rel=\"noopener\" target=\"_blank\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-Powerfloat_Primer___Curing_Agent__GB_EN__7_00__03_07_2026.pdf?v=1794397455\" rel=\"noopener\" target=\"_blank\"\u003eSafety Data Sheet – Curing Agent (GB)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-Powerfloat_Primer___Resin__GB_EN__8_00__03_07_2026.pdf?v=1794397455\" rel=\"noopener\" target=\"_blank\"\u003eSafety Data Sheet – Resin (GB)\u003c\/a\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-Powerfloat_Primer___Curing_Agent__GBNI_EN__7_00__03_07_2026.pdf?v=1794397455\" rel=\"noopener\" target=\"_blank\"\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"5L \/ Clear","offer_id":58279538327892,"sku":"CPFP5","price":125.1,"currency_code":"GBP","in_stock":true},{"title":"5L \/ Light Grey","offer_id":58279538360660,"sku":"PFP5","price":125.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-power-watco_specialist_clearpowerfloatprimer_can.png?v=1794397471"},{"product_id":"watco-powerfloat-primer-rapid","title":"Watco Powerfloat Primer Rapid","description":"\u003cp\u003eWatco Powerfloat Primer Rapid is a fast drying epoxy adhesion primer for smooth, dense concrete floors. Its water based, two component formulation prepares suitably cleaned power floated concrete for a compatible floor coating, helping reduce the downtime associated with floor refurbishment.\u003c\/p\u003e\n\u003cp\u003eThe rapid formulation is useful in workshops, warehouses and commercial interiors where the programme needs a shorter priming stage. It is supplied in Light Grey and normally needs one roller-applied coat. Although the primer can help where mechanical preparation is difficult, Watco recommends diamond grinding or shot blasting where practical for the best overall result. Cleaning, soundness and correct overcoating times remain essential.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast drying primer for smooth concrete floors indoors.\u003c\/li\u003e\n\u003cli\u003eWater based, low odour epoxy formulation.\u003c\/li\u003e\n\u003cli\u003eLight Grey finish beneath compatible floor coatings.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\u003cp\u003eRemove oil, grease, dust and weak material. Degrease where required, rinse thoroughly and let the floor dry. Remove surface laitance with a suitable preparation method. New concrete should generally dry for four weeks in summer or six in winter, subject to the intended coating's requirements. Only retain existing paint that is sound, well bonded and correctly prepared.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePack size \/ colour\u003c\/th\u003e\n\u003ctd\u003e5L \/ Light Grey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eComposition\u003c\/th\u003e\n\u003ctd\u003eTwo part, water based epoxy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum conditions\u003c\/th\u003e\n\u003ctd\u003eAir 15°C; floor 10°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePot life\u003c\/th\u003e\n\u003ctd\u003eUp to 2 hours at 20°C; use promptly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e24 months unopened\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eCoverage\u003c\/h3\u003e\u003cp\u003eAllow approximately 30m² per 5L per coat (6m²\/L). Apply one even coat worked into the substrate; avoid heavy application that can delay water release and drying.\u003c\/p\u003e\u003ch3\u003eDirections for Use\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eStir both components separately and combine the full pack. Mix thoroughly with a wide bladed tool, scraping the base and sides until uniform.\u003c\/li\u003e\n\u003cli\u003eApply with a medium pile roller and brush at edges, working well into the concrete. Maintain warm, dry conditions and good ventilation.\u003c\/li\u003e\n\u003cli\u003eFor planning at around 20°C, the linked technical sheet gives 4–6 hours before water based coatings and at least eight hours before non-water-based polyaspartic or 100% solids epoxy coatings.\u003c\/li\u003e\n\u003cli\u003eSolvent based coatings such as Concrete Floor Paint need five days. Check the current topcoat-specific instructions before applying the finish.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eLimitations\u003c\/h3\u003e\u003cp\u003eOvercoating intervals vary by coating chemistry. The product page gives a 3–36 hour window for compatible epoxy and polyaspartic finishes at 15–20°C; the technical sheet requires longer minimum waits for some systems, so the application guidance above uses those longer waits. Do not assume every paint can be applied after three hours. Not for bare metal. Seek advice for self-levelling compounds. Store at 15–25°C before use and protect from frost.\u003c\/p\u003e\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow is Rapid different from standard Powerfloat Primer?\u003c\/strong\u003e\u003cbr\u003eThe rapid formulation shortens the waiting time before suitable topcoats. It is available in Light Grey and is intended for interior smooth concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I apply any paint after three hours?\u003c\/strong\u003e\u003cbr\u003eNo. Timing depends on the topcoat. The technical sheet guides 4–6 hours for water based coatings, eight hours for non-water-based epoxy or polyaspartic finishes, and five days for solvent based floor paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a pack cover?\u003c\/strong\u003e\u003cbr\u003eApproximately 30m² per 5L for one coat, depending on the surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the floor still need preparation?\u003c\/strong\u003e\u003cbr\u003eYes. Remove contamination, weak material and laitance, and ensure the substrate is sound. Mechanical preparation is recommended where practical.\u003c\/p\u003e\u003ch3\u003eData Sheets\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-powerfloat_primer.pdf?v=1794397455\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-Powerfloat_Primer_Rapid___Curing_Agent__GB_EN__5_00__03_07_2026.pdf?v=1794397454\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Curing Agent (GB)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-Powerfloat_Primer_Rapid___Resin__GB_EN__5_00__17_06_2026.pdf?v=1794397455\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Resin (GB)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-Powerfloat_Primer_Rapid___Curing_Agent__GBNI_EN__5_00__03_07_2026.pdf?v=1794397455\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Curing Agent (GBNI)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-Powerfloat_Primer_Rapid___Resin__GBNI_EN__5_00__17_06_2026.pdf?v=1794397455\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Resin (GBNI)\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"5L \/ Light Grey","offer_id":58279553106260,"sku":"PFPR5","price":138.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-rapid-watco_specialist_powerfloatprimerrapid_can.png?v=1794397488"},{"product_id":"watco-polyaspartic-primer","title":"Watco Polyaspartic Primer","description":"\u003cp\u003eWatco Polyaspartic Primer seals porous concrete before a compatible Watco polyaspartic floor coating. By reducing the suction of bare concrete and sand and cement screeds, it helps the finish remain at the surface rather than being drawn unevenly into the floor.\u003c\/p\u003e\n\u003cp\u003eIts clear, two part formulation is suitable for indoor and outdoor coating projects and can be applied at temperatures down to -10°C when the substrate and conditions meet the specification. It can also help when overcoating suitably prepared, firmly bonded existing paint. Use it as part of a specified polyaspartic system, including compatible Watco Cold Set, Fastcoat, Food Safe, Protecta-Coat and Safety Coat products.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePenetrating primer for porous floors before polyaspartic coatings.\u003c\/li\u003e\n\u003cli\u003eClear finish for interior and exterior use.\u003c\/li\u003e\n\u003cli\u003eLow-temperature application capability with temperature-dependent curing.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\u003cp\u003eThe floor must be clean, sound and dry. Remove grease, dirt, loose material and laitance using a suitable preparation method. If chemical cleaning or etching is used, rinse thoroughly and allow complete drying. Mechanically prepare existing paint and remove poorly bonded areas. New concrete should normally dry for about eight weeks. Below 5°C, avoid wet preparation where the floor cannot be dried fully.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePack size\u003c\/th\u003e\n\u003ctd\u003e2.5L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eComposition \/ finish\u003c\/th\u003e\n\u003ctd\u003eTwo part polyaspartic \/ Clear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication temperature\u003c\/th\u003e\n\u003ctd\u003e-10°C to 25°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMixing temperature\u003c\/th\u003e\n\u003ctd\u003e10°C to 25°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePot life\u003c\/th\u003e\n\u003ctd\u003e20 minutes at 15°C; 30 minutes below 15°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e12 months unopened\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eCoverage\u003c\/h3\u003e\u003cp\u003eAllow approximately 20m² per 2.5L (8m²\/L) in one coat. Coverage can reduce below 0°C or on more absorbent substrates. Apply a thin, even film using the specified microfibre roller.\u003c\/p\u003e\u003ch3\u003eDirections for Use\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eCondition the unopened product at 15–25°C for at least eight hours. Stir each component separately.\u003c\/li\u003e\n\u003cli\u003eCombine the complete contents, mix thoroughly with a wide bladed tool and scrape the base and sides. Do not dilute or mix more than one pack at a time.\u003c\/li\u003e\n\u003cli\u003eRoll evenly with a microfibre roller, using a brush for edges. Work promptly within the short pot life.\u003c\/li\u003e\n\u003cli\u003eThe current product page gives floor recoating guidance of four hours at 20°C, six hours at 10°C, twelve hours at 0°C and twenty-four hours at -10°C. Check the chosen finish's instructions before overcoating.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eLimitations\u003c\/h3\u003e\u003cp\u003eDo not apply to damp surfaces or when rain is imminent. Low application temperature does not remove the need to mix warm material or keep the floor dry. Most self-levelling compounds need advice before coating. Protect stored material from freezing and read both component safety sheets. Cure and recoating times depend strongly on temperature and conditions.\u003c\/p\u003e\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy use a primer beneath a polyaspartic coating?\u003c\/strong\u003e\u003cbr\u003eIt reduces suction in porous concrete, helping a compatible polyaspartic topcoat form a more even surface film.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use it below freezing?\u003c\/strong\u003e\u003cbr\u003eApplication is specified down to -10°C on a suitable dry substrate. Mix at 10–25°C and condition the material warm beforehand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much will it cover?\u003c\/strong\u003e\u003cbr\u003eApproximately 20m² per 2.5L. Cold conditions below 0°C and highly absorbent floors may reduce coverage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen can I overcoat?\u003c\/strong\u003e\u003cbr\u003eThe current product guidance gives four hours at 20°C, six at 10°C, twelve at 0°C and twenty-four at -10°C. Confirm compatibility with the intended finish.\u003c\/p\u003e\u003ch3\u003eData Sheets\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-polyaspartic_primer_uk_tds.pdf?v=1794397455\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-Polyaspartic_Primer___Curing_Agent__GB_EN__7_00__29_06_2026.pdf?v=1794397455\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Curing Agent (GB)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-Polyaspartic_Primer___Resin__GB_EN__1_00__30_11_2024.pdf?v=1794397455\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Resin (GB)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-Polyaspartic_Primer___Curing_Agent__GBNI_EN__7_00__29_06_2026.pdf?v=1794397455\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Curing Agent (GBNI)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-Polyaspartic_Primer___Resin__GBNI_EN__1_00__30_11_2024.pdf?v=1794397455\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Resin (GBNI)\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"2.5L","offer_id":58279556907348,"sku":"FCTP2.5","price":123.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-poly-watco_specialist_polyasparticprimer_can.png?v=1794397492"},{"product_id":"watco-epoxy-damp-proof-membrane","title":"Watco Epoxy Damp Proof Membrane","description":"\u003cp\u003eWatco Epoxy Damp Proof Membrane is a two part epoxy moisture barrier for interior concrete floors affected by rising damp. It is designed for situations where the original damp proof membrane is missing or ineffective, helping suppress moisture vapour before a compatible floor coating is applied.\u003c\/p\u003e\n\u003cp\u003eThe virtually solvent free, 100% solids formulation tolerates concrete moisture levels up to 98% RH. A full, continuous coat provides the barrier, making preparation and careful inspection particularly important. Suitable projects include industrial and commercial concrete or sand and cement floors where moisture would otherwise interfere with the selected coating system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEpoxy moisture barrier for floors with an absent or defective DPM.\u003c\/li\u003e\n\u003cli\u003eTolerates moisture levels up to 98% RH.\u003c\/li\u003e\n\u003cli\u003eDark Grey finish helps show complete coverage.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\u003cp\u003eEnsure the concrete is sound and free of contamination, weak material and dust. Mechanical preparation by shot blasting or scarifying is preferred, followed by thorough vacuuming. Smooth power floated concrete requires mechanical preparation. Turn underfloor heating off at least two days before application and leave it off for two days afterwards, then restart gradually.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePack size \/ colour\u003c\/th\u003e\n\u003ctd\u003e8kg \/ Dark Grey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eComposition\u003c\/th\u003e\n\u003ctd\u003eTwo part, 100% solids epoxy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior concrete and sand and cement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMoisture tolerance\u003c\/th\u003e\n\u003ctd\u003eUp to 98% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum conditions\u003c\/th\u003e\n\u003ctd\u003eAir 15°C; floor 10°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePot life \/ shelf life\u003c\/th\u003e\n\u003ctd\u003e1 hour at 15°C \/ 6 months unopened\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eCoverage\u003c\/h3\u003e\u003cp\u003eAllow approximately 20–25m² per 8kg at a wet film thickness of 250 microns. The calculator uses 20m² per pack (2.5m²\/kg). Rough, open-textured or very porous concrete can require a second coat to close pinholes and complete the barrier.\u003c\/p\u003e\u003ch3\u003eDirections for Use\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eCombine the full resin and curing agent pack and mix thoroughly, scraping the container base and sides.\u003c\/li\u003e\n\u003cli\u003eDecant immediately into a roller tray: mixed epoxy left in the container can generate considerable heat.\u003c\/li\u003e\n\u003cli\u003eApply a full coat with a medium pile roller, using a brush at edges. Inspect when dry and cover pinholes or missed areas with another coat.\u003c\/li\u003e\n\u003cli\u003eAt 15°C, wait 16 hours before suitable 100% solids Watco topcoats, or 24–48 hours for water based coatings. If more than 4–5 days elapse, lightly abrade before overcoating.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eLimitations\u003c\/h3\u003e\u003cp\u003eA moisture barrier must form a continuous film. Do not rely on a thin, patchy coat over highly porous concrete. Flowtop and similar screed or repair overlays can require two coats with the second sand blinded; follow the full system instructions. Condition material at 15–25°C for at least eight hours and protect from freezing. This membrane is specified as a preparation layer beneath compatible finishes.\u003c\/p\u003e\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat problem does this membrane address?\u003c\/strong\u003e\u003cbr\u003eIt suppresses rising damp and moisture vapour in suitable interior concrete where the original damp proof membrane is missing or ineffective.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat moisture level can it tolerate?\u003c\/strong\u003e\u003cbr\u003eUp to 98% RH, provided the substrate and application meet the manufacturer's specification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many coats are needed?\u003c\/strong\u003e\u003cbr\u003eUsually one full coat on good quality concrete. Inspect carefully and apply another where porosity, pinholes or missed areas prevent a continuous barrier.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen can it be painted?\u003c\/strong\u003e\u003cbr\u003eAt 15°C, allow 16 hours for suitable 100% solids Watco coatings and 24–48 hours for water based finishes. Follow the selected system's instructions.\u003c\/p\u003e\u003ch3\u003eData Sheets\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-Epoxy_Damp_Proof_Membrane.pdf?v=1794397455\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-Epoxy_Damp_Proof_Membrane___Curing_Agent__GB_EN__2_00__30_11_2024.pdf?v=1794397455\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Curing Agent (GB)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-Epoxy_Damp_Proof_Membrane___Resin__GB_EN__2_00__30_11_2024.pdf?v=1794397455\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Resin (GB)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-Epoxy_Damp_Proof_Membrane___Curing_Agent__GBNI_EN__2_00__30_11_2024.pdf?v=1794397455\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Curing Agent (GBNI)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-Epoxy_Damp_Proof_Membrane___Resin__GBNI_EN__2_00__30_11_2024.pdf?v=1794397455\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Resin (GBNI)\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"8kg","offer_id":58279557890388,"sku":"EDPMDY8","price":185.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-dpm-epdm_lowres_web.jpg?v=1794397506"},{"product_id":"watco-universal-sealer-dustproofer","title":"Watco Universal Sealer Dustproofer","description":"\u003cp\u003eWatco Universal Sealer Dustproofer penetrates porous concrete and masonry to strengthen dusty surfaces and reduce ongoing dusting. Its clear, water based micronised acrylic formulation works within the substrate, making it useful where a simple dustproofing treatment is needed without a conventional coloured floor coating.\u003c\/p\u003e\n\u003cp\u003eUse it on suitable bare concrete floors, sand and cement screeds, brickwork, blockwork, plaster and block paving. It is suitable indoors and outdoors, including factories, warehouses and machine shops. The microporous treatment allows the substrate to breathe and is normally applied in one coat with a soft broom. It may slightly darken some materials, so test an inconspicuous area where appearance matters.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePenetrating treatment for weak, dusty porous surfaces.\u003c\/li\u003e\n\u003cli\u003eClear, low odour, water based acrylic.\u003c\/li\u003e\n\u003cli\u003eSimple broom application; no two component mixing.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\u003cp\u003eSweep and vacuum away loose dust and material. The substrate must be dry, clean and absorbent: a small water-drop test should show water readily soaking in. Remove oil or grease with a suitable cleaner, rinse thoroughly and allow complete drying. Remove laitance mechanically; do not acid etch. The technical sheet guides four weeks drying for new concrete in summer or six in winter, with moisture below 75% RH.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePack sizes\u003c\/th\u003e\n\u003ctd\u003e5L and 25L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eComposition\u003c\/th\u003e\n\u003ctd\u003eSingle pack, water based micronised acrylic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eClear; may slightly darken the substrate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior and exterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum conditions\u003c\/th\u003e\n\u003ctd\u003eAir 15°C; floor 10°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e24 months unopened\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eCoverage\u003c\/h3\u003e\u003cp\u003eAllow approximately 30m² per 5L or 150m² per 25L (6m²\/L), depending on absorption. One coat is usually sufficient, but very porous, open-textured surfaces may need further coats.\u003c\/p\u003e\u003ch3\u003eDirections for Use\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eShake the container well before use.\u003c\/li\u003e\n\u003cli\u003eDistribute with a soft broom and work the liquid into the surface so it is absorbed.\u003c\/li\u003e\n\u003cli\u003eSweep surplus onto adjacent areas. Do not leave puddles or unabsorbed liquid to dry on the floor.\u003c\/li\u003e\n\u003cli\u003eAt 20°C, touch dry is approximately four hours and light traffic can resume after twelve hours. If another coat is required, allow at least eight hours at 20°C or sixteen hours at 10°C.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eLimitations\u003c\/h3\u003e\u003cp\u003eDo not apply to painted, sealed, power floated or other non-porous surfaces: the product relies on penetration. Damp concrete reduces absorption and is unsuitable. Protect from rain and avoid washing for 24–48 hours after application. Condition stored material at 15–25°C for at least eight hours before use and prevent freezing. A dusty but structurally unsound floor still needs appropriate repair.\u003c\/p\u003e\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWill it leave a coloured coating?\u003c\/strong\u003e\u003cbr\u003eNo. It is a clear penetrating dustproofer rather than a coloured floor paint. It can slightly darken some substrates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use it on power floated concrete?\u003c\/strong\u003e\u003cbr\u003eNo. Dense power floated, painted, sealed or non-porous surfaces prevent the penetration needed for this treatment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a container cover?\u003c\/strong\u003e\u003cbr\u003eApproximately 30m² per 5L or 150m² per 25L. Very porous surfaces can absorb more material and need further coats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen can the floor be used?\u003c\/strong\u003e\u003cbr\u003eAt 20°C, allow approximately twelve hours before light traffic. At 10°C allow twenty-four hours. Protect from rain and washing for 24–48 hours.\u003c\/p\u003e\u003ch3\u003eData Sheets\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-UK_TDS_Universal_Sealer_Dustproofer.pdf?v=1794397455\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-Universal_Sealer_Dustproofer__GB_EN__6_00__18_06_2026.pdf?v=1794397455\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet (GB)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-Universal_Sealer_Dustproofer__GBNI_EN__6_00__18_06_2026.pdf?v=1794397455\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet (GBNI)\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"5L","offer_id":58279561199956,"sku":"UNISEAL05","price":84.6,"currency_code":"GBP","in_stock":true},{"title":"25L","offer_id":58279561232724,"sku":"UNISEAL25","price":343.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-uni-universal_sealer_dustproofer.jpg?v=1794397517"},{"product_id":"watco-concrete-sealer-water-based","title":"Watco Concrete Sealer Water Based","description":"\u003cp\u003eWatco Concrete Sealer Water Based is a penetrating acrylic floor sealer for bare, porous concrete and sand and cement screeds. It binds dusty surface material and forms a protective film that helps resist staining and makes everyday cleaning easier in warehouses, garages, production areas and stores.\u003c\/p\u003e\n\u003cp\u003eChoose Clear to retain the character of the concrete or Light Grey to add a subtle tint while sealing the floor. The breathable, low odour formulation is supplied ready to use, without a separate activator. Appearance depends on the floor's absorption and the number of coats: a trial area is particularly useful where an even grey colour or a specific sheen matters.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWater based acrylic sealer and dustproofer for porous floors.\u003c\/li\u003e\n\u003cli\u003eClear and Light Grey options.\u003c\/li\u003e\n\u003cli\u003eApply with a soft broom or brush.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\u003cp\u003eSweep and vacuum thoroughly. Remove oil and grease with a suitable degreaser such as Watco Bio-D or Concroff, rinse away all residue and allow the floor to dry. Remove laitance mechanically; do not acid etch. New concrete should generally dry for four weeks in summer or six in winter. Avoid saturating highly porous screeds during cleaning.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePack options\u003c\/th\u003e\n\u003ctd\u003eClear: 5L and 25L; Light Grey: 5L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eComposition\u003c\/th\u003e\n\u003ctd\u003eSingle pack, water based acrylic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSubstrate\u003c\/th\u003e\n\u003ctd\u003eBare, porous concrete and sand and cement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eAir at least 15°C; floor at least 10°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLight traffic \/ full use\u003c\/th\u003e\n\u003ctd\u003e12 hours \/ 24 hours, subject to conditions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eCoverage\u003c\/h3\u003e\u003cp\u003eApproximately 40–50m² per 5L per coat, depending on porosity. Allow a conservative 8m²\/L per coat for planning. Plan for two coats in line with the current specification table; additional coats can be needed on very absorbent floors or for a more even Light Grey tint.\u003c\/p\u003e\u003ch3\u003eDirections for Use\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eShake the container thoroughly to redisperse any settled material or pigment.\u003c\/li\u003e\n\u003cli\u003ePour a small amount onto the floor and spread evenly with a soft broom or brush, working it into the substrate.\u003c\/li\u003e\n\u003cli\u003eRemove unabsorbed surplus and avoid puddles or thick patches.\u003c\/li\u003e\n\u003cli\u003eWhere another coat is needed, allow six hours at 20°C or eight hours at 10°C. Allow twelve hours before light traffic and twenty-four hours before full use.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eLimitations\u003c\/h3\u003e\u003cp\u003eDo not apply to painted, sealed or power floated concrete: penetration is essential. The surface must not be wet; only slight residual damp from cleaning is acceptable. For dense smooth floors, consider Watco Powerfloat Sealer. Do not steam clean the finished coating. Condition material at 15–25°C before use and protect from frost. Check suitability with Watco before exterior work, as the product page and linked technical sheet differ on exterior use.\u003c\/p\u003e\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs it suitable for power floated concrete?\u003c\/strong\u003e\u003cbr\u003eNo. It needs a porous surface. Watco Powerfloat Sealer is the specialist option for suitable smooth, dense concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill Light Grey hide the concrete completely?\u003c\/strong\u003e\u003cbr\u003eIt adds a tint rather than the hiding power of an opaque floor paint. Porosity affects colour, so apply a trial area.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many coats should I allow for?\u003c\/strong\u003e\u003cbr\u003ePlan for two coats using the current specification table. Particularly porous floors or an even grey tint can need more.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen can the floor be used?\u003c\/strong\u003e\u003cbr\u003eAllow approximately twelve hours for light traffic and twenty-four hours for full use under suitable conditions.\u003c\/p\u003e\u003ch3\u003eData Sheets\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-next-uk_tds_concrete_sealer_wb_01_23.pdf?v=1794400496\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-next-concrete_sealer_water_based__coloured_version__gb.pdf?v=1794400495\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet - Coloured Version (GB)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-next-Concrete_Sealer_Water_Based__GB_EN__5_00__18_06_2026.pdf?v=1794400495\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet (GB)\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"5L \/ Clear","offer_id":58281765699924,"sku":"CSWB","price":86.1,"currency_code":"GBP","in_stock":true},{"title":"25L \/ Clear","offer_id":58281765732692,"sku":"CSWB25L","price":345.6,"currency_code":"GBP","in_stock":true},{"title":"5L \/ Light Grey","offer_id":58281765765460,"sku":"CD5LGY","price":95.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-next-concrete_sealer_waterbased.jpg?v=1794400441"},{"product_id":"watco-powerfloat-sealer","title":"Watco Powerfloat Sealer","description":"\u003cp\u003eWatco Powerfloat Sealer is a clear epoxy floor sealer designed for hard, smooth and power floated concrete indoors. Its two part, water based formulation seals and dustproofs suitable concrete while retaining the appearance of the underlying floor, with a choice of Gloss or Matt finish.\u003c\/p\u003e\n\u003cp\u003eDense concrete can be difficult to coat because ordinary penetrating sealers cannot soak into the surface. Powerfloat Sealer is formulated for this type of floor and can be applied directly after correct cleaning and preparation. It suits warehouse, workshop and industrial interiors where a clear, easy-clean finish is wanted. Watco recommends diamond grinding or shot blasting where practical for the best overall result, particularly on highly polished surfaces.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eClear epoxy protection for smooth concrete indoors.\u003c\/li\u003e\n\u003cli\u003eGloss and Matt finish options.\u003c\/li\u003e\n\u003cli\u003eNormally one coat, without a separate primer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\u003cp\u003eAllow new concrete at least twenty-eight days to dry. Remove oil, grease, dust, dirt and other contamination, leaving a clean, dry surface. Highly polished concrete may require mechanical abrasion. Confirm suitability for the actual floor before application; a small test area helps assess appearance and adhesion.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePack size\u003c\/th\u003e\n\u003ctd\u003e5L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eClear Gloss or Clear Matt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eComposition\u003c\/th\u003e\n\u003ctd\u003eTwo part, water based epoxy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication range\u003c\/th\u003e\n\u003ctd\u003e15–30°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePot life\u003c\/th\u003e\n\u003ctd\u003eUp to 2 hours at 20°C; aim to apply within 1 hour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e24 months unopened\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eCoverage\u003c\/h3\u003e\u003cp\u003eApproximately 40m² per 5L per coat (8m²\/L). Spread a full mixed pack over a measured area of at least 40m² rather than applying it heavily. One coat is normally enough; very porous substrates can need a second coat for an even finish.\u003c\/p\u003e\u003ch3\u003eDirections for Use\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eStir the resin and curing agent separately, then empty both complete components into the outer tin.\u003c\/li\u003e\n\u003cli\u003eMix thoroughly for two to three minutes with a wide bladed stirrer, scraping the sides and base. The mixed liquid initially appears white or off-white.\u003c\/li\u003e\n\u003cli\u003eTransfer to a roller tray. Apply evenly with a medium pile roller and brush at edges.\u003c\/li\u003e\n\u003cli\u003eMaintain a through draught and suitable temperature while curing. Allow approximately sixteen hours at 15–20°C before general traffic, with longer waiting in poorer conditions.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eLimitations\u003c\/h3\u003e\u003cp\u003eInterior use only. Excessive thickness or inadequate ventilation can prevent the coating drying clear. Cold or damp conditions delay or prevent curing, so do not apply below 15°C or above 30°C. Not suitable for bare metal; seek advice before coating self-levelling compounds. Remove food from the area during application and cure. Store at 15–25°C for at least eight hours before use and protect from freezing.\u003c\/p\u003e\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan it seal smooth power floated concrete?\u003c\/strong\u003e\u003cbr\u003eYes, that is its intended application. The floor still needs cleaning and preparation; highly polished surfaces can require abrasion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it need a primer?\u003c\/strong\u003e\u003cbr\u003eNormally no. Follow the technical sheet and assess the actual substrate before coating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the mixed sealer look white?\u003c\/strong\u003e\u003cbr\u003eThe water based components initially appear opaque. Correct thickness, warmth and ventilation are important for the clear finish to develop.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow soon can traffic return?\u003c\/strong\u003e\u003cbr\u003eAllow approximately sixteen hours at 15–20°C under suitable conditions. Cold or damp conditions can extend curing.\u003c\/p\u003e\u003ch3\u003eData Sheets\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-next-powerfloat_sealer_tds.pdf?v=1794400496\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-next-powerfloat_sealer_curing_agent_gb.pdf?v=1794400496\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet - Curing Agent (GB)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-next-Powerfloat_Sealer___Resin__GB_EN__5_00__17_06_2026.pdf?v=1794400495\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet - Resin (GB)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-next-powerfloat_sealer_matt_anti_slip_curing_agent_gb.pdf?v=1794400496\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet - Matt Curing Agent (GB)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-next-Powerfloat_Sealer_Matt_Anti_Slip___Resin__GB_EN__1_00__18_06_2026.pdf?v=1794400495\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet - Matt Resin (GB)\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"5L \/ Gloss","offer_id":58281766650196,"sku":"PS5","price":125.1,"currency_code":"GBP","in_stock":true},{"title":"5L \/ Matt","offer_id":58281766682964,"sku":"PSM5","price":125.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-next-watco_specialist_powerfloatsealer_can.png?v=1794400452"},{"product_id":"watco-powerfloat-sealer-anti-slip","title":"Watco Powerfloat Sealer Anti Slip","description":"\u003cp\u003eWatco Powerfloat Sealer Anti Slip gives suitable smooth concrete a clear protective finish with a fine slip-resistant texture. Designed for indoor power floated and other dense concrete floors, this two part epoxy sealer combines dustproofing and surface protection with an aggregate-enhanced finish.\u003c\/p\u003e\n\u003cp\u003eChoose Gloss or Matt to suit the appearance of the floor. The water based resin is applied by roller, usually in one coat, without a separate primer. It is useful where a smooth industrial floor needs clear protection and improved grip. Correct cleaning, even application and good ventilation remain essential; Watco recommends mechanical preparation where practical, especially on very highly polished concrete.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eClear, finely textured anti-slip epoxy sealer.\u003c\/li\u003e\n\u003cli\u003eGloss and Matt options for interior concrete.\u003c\/li\u003e\n\u003cli\u003eAggregate included in the resin component.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\u003cp\u003eNew concrete should dry for at least twenty-eight days. Remove oil, grease, dust and weak material and ensure the floor is clean and dry. Retained coatings must be sound and firmly bonded. Highly polished surfaces may need mechanical abrasion; confirm suitability and test a small area where appearance or adhesion is critical.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePack size\u003c\/th\u003e\n\u003ctd\u003e5L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eClear, fine textured; Gloss or Matt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eComposition\u003c\/th\u003e\n\u003ctd\u003eTwo part, water based epoxy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication range\u003c\/th\u003e\n\u003ctd\u003e15–30°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePot life\u003c\/th\u003e\n\u003ctd\u003eUp to 2 hours at 20°C; apply promptly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnopened shelf life\u003c\/th\u003e\n\u003ctd\u003e12 months, as listed on the product page\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eCoverage\u003c\/h3\u003e\u003cp\u003eApproximately 40m² per 5L per coat (8m²\/L). Spread the mixed pack across a measured area of at least 40m². Avoid a heavy film: correct application helps the resin dry clear and the texture develop evenly.\u003c\/p\u003e\u003ch3\u003eDirections for Use\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eStir both components thoroughly, including the aggregate-bearing resin, to distribute the contents evenly.\u003c\/li\u003e\n\u003cli\u003eCombine the complete resin and curing agent in the outer tin and mix for two to three minutes, scraping the base and sides.\u003c\/li\u003e\n\u003cli\u003eDecant into a tray and apply with a medium pile roller. Use a brush for edges and maintain an even spread.\u003c\/li\u003e\n\u003cli\u003eProvide a through draught during cure. Plan for approximately sixteen hours at 15–20°C before general traffic and allow longer in less favourable conditions.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eLimitations\u003c\/h3\u003e\u003cp\u003eFor indoor use. Improved slip resistance does not remove the need to control spills and keep floors clean. Do not apply below 15°C or above 30°C. Thick application or inadequate ventilation can leave the finish cloudy. Not for bare metal; obtain advice for self-levelling compounds. Keep food out of the work area during application and cure. Condition material at 15–25°C before use and protect from frost.\u003c\/p\u003e\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow does it differ from standard Powerfloat Sealer?\u003c\/strong\u003e\u003cbr\u003eThe Anti Slip version contains aggregate to produce a fine textured, slip-resistant finish. Standard Powerfloat Sealer produces a smooth finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the finish clear?\u003c\/strong\u003e\u003cbr\u003eYes. The liquid starts white or off-white and should cure clear with correct spreading, warmth and ventilation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I add separate grit?\u003c\/strong\u003e\u003cbr\u003eThe technical sheet states the aggregate is pre-blended into the resin. Stir thoroughly to distribute it before combining the components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much floor does it cover?\u003c\/strong\u003e\u003cbr\u003eApproximately 40m² per 5L for one coat. Measure the area and avoid applying the pack too thickly.\u003c\/p\u003e\u003ch3\u003eData Sheets\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-next-powerfloat_sealer_tds.pdf?v=1794400496\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-next-powerfloat_sealer_anti_slip_curing_agent_gb.pdf?v=1794400496\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet - Gloss Curing Agent (GB)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-next-Powerfloat_Sealer_Anti_Slip___Resin__GB_EN__5_00__17_06_2026.pdf?v=1794400496\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet - Gloss Resin (GB)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-next-powerfloat_sealer_matt_anti_slip_curing_agent_gb.pdf?v=1794400496\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet - Matt Curing Agent (GB)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-next-Powerfloat_Sealer_Matt_Anti_Slip___Resin__GB_EN__1_00__18_06_2026.pdf?v=1794400495\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet - Matt Resin (GB)\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"5L \/ Gloss","offer_id":58281767469396,"sku":"PSAS5","price":138.2,"currency_code":"GBP","in_stock":true},{"title":"5L \/ Matt","offer_id":58281767502164,"sku":"PSMAS5","price":138.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-next-watco_specialist_powerfloatsealerantislip_can.png?v=1794400471"},{"product_id":"watco-protectacoat","title":"Watco Protecta-Coat","description":"\u003cp\u003eWatco Protecta-Coat is a clear polyaspartic floor coating for protecting suitably prepared concrete and existing floor finishes against wear. Its tough, glossy finish helps preserve coloured and decorative coatings while providing an easier-to-clean surface in warehouses, showrooms and other working areas.\u003c\/p\u003e\n\u003cp\u003eThe two part formulation can be used indoors and outdoors and is suitable for cold-weather projects when applied to a dry, correctly prepared substrate. Its resistance to UV and weathering makes it useful where a clear finish needs to retain its appearance outside. Application is deliberately thin: spreading the mixed material over the correct measured area is important for both coverage and curing.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eClear, hard wearing polyaspartic protective coating.\u003c\/li\u003e\n\u003cli\u003eSuitable for compatible existing paint after preparation and a trial.\u003c\/li\u003e\n\u003cli\u003eLow-temperature application down to -10°C.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\u003cp\u003eDiamond grind existing painted surfaces to a consistently rough profile and remove all weakly bonded material. Sweep and vacuum thoroughly. Degrease where required, rinse completely and allow to dry. Allow new concrete about eight weeks to dry. Porous or high-suction surfaces can require Watco Polyaspartic Primer. Power floated concrete needs a specified preparation and priming system rather than direct coating.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePack size \/ finish\u003c\/th\u003e\n\u003ctd\u003e2.5L \/ Clear glossy finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eComposition\u003c\/th\u003e\n\u003ctd\u003eTwo part polyaspartic resin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior and exterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication \/ mixing range\u003c\/th\u003e\n\u003ctd\u003e-10°C to 30°C \/ mix at 10–25°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePot life\u003c\/th\u003e\n\u003ctd\u003eApproximately 20 minutes at 20°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e12 months unopened\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eCoverage\u003c\/h3\u003e\u003cp\u003eApproximately 30m² per 2.5L on a non-porous prepared surface (12m²\/L). Textured or porous substrates and temperatures below 0°C can reduce coverage. One thin coat is normally specified.\u003c\/p\u003e\u003ch3\u003eDirections for Use\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eCondition the product at 15–25°C for at least eight hours, then stir each component separately.\u003c\/li\u003e\n\u003cli\u003eCombine the full pack and mix thoroughly with a wide bladed tool, scraping the base and sides. Do not dilute or mix more than one pack at a time.\u003c\/li\u003e\n\u003cli\u003eEmpty into a shallow tray and apply promptly with a short pile roller, working the coating into a thin film over the measured area.\u003c\/li\u003e\n\u003cli\u003eFor planning, the linked technical sheet gives six hours before recoating, eight hours before light traffic and sixteen hours before heavy traffic at 20°C. Allow seven days for full chemical resistance.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eLimitations\u003c\/h3\u003e\u003cp\u003eDo not apply to damp, icy or wet surfaces, or when rain is imminent. The smooth finish can become slippery outdoors; select Protecta-Coat Anti Slip where grip is needed. Test compatibility with existing coatings. Do not apply heavily or use on unprepared power floated concrete. Most self-levelling compounds require specific advice. Cure times extend markedly in cold conditions; follow the technical sheet for the actual temperature.\u003c\/p\u003e\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan it protect an existing coloured floor?\u003c\/strong\u003e\u003cbr\u003eYes, if the coating is compatible, sound and thoroughly prepared. Test a small area first and remove weakly bonded paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use it outside?\u003c\/strong\u003e\u003cbr\u003eYes, on a suitable dry substrate. Avoid imminent rain and consider the Anti Slip version where a smooth finish could become slippery.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a primer required?\u003c\/strong\u003e\u003cbr\u003ePorous or high-suction concrete generally needs Polyaspartic Primer. Power floated floors need a specified preparation and primer system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow thickly should it be applied?\u003c\/strong\u003e\u003cbr\u003eAs a thin film over approximately 30m² per 2.5L. Applying heavily reduces coverage and can cause curing problems.\u003c\/p\u003e\u003ch3\u003eData Sheets\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-next-protecta_coat_and_anti_slip.pdf?v=1794400496\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-next-Protecta_Coat___Curing_Agent__GB_EN__5_00__29_06_2026.pdf?v=1794400496\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet - Curing Agent (GB)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-next-protecta_coat_resin_gb.pdf?v=1794400495\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet - Resin (GB)\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"2.5L","offer_id":58281768321364,"sku":"PAC2.5","price":148.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-next-protecta_coat.jpg?v=1794400477"},{"product_id":"watco-protectacoat-anti-slip","title":"Watco Protecta-Coat Anti Slip","description":"\u003cp\u003eWatco Protecta-Coat Anti Slip is a clear polyaspartic floor coating with a finely textured finish for areas that need durable protection and improved grip. It helps protect compatible coloured and decorative coatings from wear while leaving the underlying finish visible.\u003c\/p\u003e\n\u003cp\u003eSuitable applications include prepared warehouse and showroom floors, walk-in fridges and exterior working areas. The two part resin system is supplied with fine grit and can be applied in cold conditions when the surface is dry and the product is mixed at the specified temperature. Its UV and weather resistance make it useful outdoors, while the textured finish provides an alternative to the smooth standard Protecta-Coat.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eClear protective coating with included anti-slip aggregate.\u003c\/li\u003e\n\u003cli\u003eSuitable for compatible concrete and well-bonded paint systems.\u003c\/li\u003e\n\u003cli\u003eInterior and exterior use, including low-temperature application.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\u003cp\u003eMechanically prepare existing paint to a uniformly rough profile and remove weak material. Sweep thoroughly, degrease as needed, rinse and let the surface dry completely. New concrete normally needs about eight weeks to dry. Prime porous and high-suction concrete with the specified Polyaspartic Primer system. Power floated concrete needs specialist preparation and priming; do not apply directly.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePack size\u003c\/th\u003e\n\u003ctd\u003e2.5L resin system with included fine grit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eClear, textured, glossy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eComposition\u003c\/th\u003e\n\u003ctd\u003eTwo part polyaspartic resin and aggregate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication \/ mixing range\u003c\/th\u003e\n\u003ctd\u003e-10°C to 30°C \/ mix at 10–25°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePot life\u003c\/th\u003e\n\u003ctd\u003eApproximately 20 minutes at 20°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e12 months unopened\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eCoverage\u003c\/h3\u003e\u003cp\u003eApproximately 30m² per 2.5L on a suitable non-porous surface (12m²\/L). Porous, textured or very cold surfaces may reduce coverage. Apply one thin, even coat so the aggregate texture remains effective.\u003c\/p\u003e\u003ch3\u003eDirections for Use\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eStore material warm at 15–25°C for at least eight hours before use. Stir the resin and curing agent separately.\u003c\/li\u003e\n\u003cli\u003eCombine the complete components and included fine grit. Mix thoroughly, scraping the sides and base, and do not dilute.\u003c\/li\u003e\n\u003cli\u003eTransfer all mixed material to a shallow tray. Apply with a short pile roller; periodically agitate the tray to keep grit evenly distributed.\u003c\/li\u003e\n\u003cli\u003eUsing the technical sheet for planning at 20°C, allow six hours before recoating, eight hours for light traffic and sixteen hours for heavy traffic. Full chemical resistance takes seven days.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eLimitations\u003c\/h3\u003e\u003cp\u003eThe substrate must be dry and free of ice. Do not apply when rain is imminent. Excessive film thickness can reduce the slip-resistant texture and cause curing problems. Improved grip still depends on cleaning and control of contamination. Trial compatibility with existing coatings, and obtain advice before coating self-levelling compounds. Low temperatures extend curing substantially; use the temperature-specific technical guidance.\u003c\/p\u003e\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the anti-slip aggregate supplied?\u003c\/strong\u003e\u003cbr\u003eYes. The technical sheet specifies fine grit with the resin system. Add and mix it as directed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I apply it over existing floor paint?\u003c\/strong\u003e\u003cbr\u003eOnly where the paint is compatible, sound and mechanically prepared. A trial area is recommended before treating the full floor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I keep the texture even?\u003c\/strong\u003e\u003cbr\u003eMix thoroughly, agitate the material in the shallow tray periodically and apply a thin, even coat at the specified coverage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it be applied in cold weather?\u003c\/strong\u003e\u003cbr\u003eApplication is specified down to -10°C, but the substrate must be dry and ice-free, and mixing must take place at 10–25°C.\u003c\/p\u003e\u003ch3\u003eData Sheets\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-next-protecta_coat_and_anti_slip.pdf?v=1794400496\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-next-protecta_coat_anti_slip_aggregate_gb.pdf?v=1794400495\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet - Aggregate (GB)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-next-Protecta_Coat_Anti_Slip___Curing_Agent__GB_EN__5_00__29_06_2026.pdf?v=1794400496\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet - Curing Agent (GB)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-next-protecta_coat_anti_slip_resin_gb.pdf?v=1794400495\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet - Resin (GB)\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"2.5L","offer_id":58281769238868,"sku":"PACSR2.5","price":159.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-next-protecta_coat.jpg?v=1794400477"},{"product_id":"watco-epoxicote-high-build-primer","title":"Watco Epoxicote High Build Primer","description":"\u003cp\u003eWatco Epoxicote High Build Primer prepares bare concrete before the Watco Epoxicote High Build floor coating system. Its water based, two part epoxy formulation helps seal porous concrete to reduce air-entrapment bubbles in the subsequent high build finish, while also providing adhesion on suitable hard, smooth concrete.\u003c\/p\u003e\n\u003cp\u003eA porous unsealed floor can release air into a heavy resin coating during application and cure. Priming first helps control this and creates a more consistent base for the specified finish. The Light Grey primer is designed for interior use on bare, unsealed concrete, including suitable power floated surfaces. Use it as part of the named Epoxicote High Build system rather than as a general-purpose primer for unrelated paints.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSeals porous concrete before a high build epoxy finish.\u003c\/li\u003e\n\u003cli\u003eHelps reduce air-entrapment bubbles.\u003c\/li\u003e\n\u003cli\u003eOne coat, applied by roller.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\u003cp\u003eRemove contamination, loose material and surface laitance. If Etch \u0026amp; Clean is used where appropriate, rinse thoroughly and allow to dry. Slight residual damp after cleaning is acceptable according to the application guidance, but concrete moisture must remain below 75% RH. New concrete should generally dry for four weeks in summer or six weeks in winter. Confirm the preparation needed for especially smooth or polished areas.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePack size \/ colour\u003c\/th\u003e\n\u003ctd\u003e3L \/ Light Grey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eComposition\u003c\/th\u003e\n\u003ctd\u003eTwo part, water based epoxy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuitable substrate\u003c\/th\u003e\n\u003ctd\u003eBare, unsealed concrete\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum conditions\u003c\/th\u003e\n\u003ctd\u003eAir 15°C; floor 10°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePot life\u003c\/th\u003e\n\u003ctd\u003eUp to 2 hours at 20°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e24 months unopened\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eCoverage\u003c\/h3\u003e\u003cp\u003eApproximately 18m² per 3L for one coat (6m²\/L). Work the material evenly into the concrete and keep within the specified maximum coverage so the primer provides a continuous base.\u003c\/p\u003e\u003ch3\u003eDirections for Use\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eStir each component separately, then empty the complete resin and curing agent into the outer container.\u003c\/li\u003e\n\u003cli\u003eMix thoroughly with a wide bladed tool, scraping the sides and base until the colour and consistency are uniform. Mix one pack at a time.\u003c\/li\u003e\n\u003cli\u003eApply with a medium pile roller, using a brush at edges, in warm conditions with good ventilation.\u003c\/li\u003e\n\u003cli\u003eAt 20°C, allow approximately twelve hours before applying Watco Epoxicote High Build. The technical sheet gives twenty-four hours at 10°C; colder conditions slow drying.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eLimitations\u003c\/h3\u003e\u003cp\u003eUse only with Watco Epoxicote High Build. Not suitable for bare metal; most self-levelling compounds require specific advice before painting. Do not treat the primer as a final wearing surface. Condition the product at 15–25°C for at least eight hours before application and protect from freezing. Clean tools with warm soapy water before the material cures.\u003c\/p\u003e\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhich coating is this primer designed for?\u003c\/strong\u003e\u003cbr\u003eWatco Epoxicote High Build. The technical sheet specifies use only with that coating system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy prime porous concrete?\u003c\/strong\u003e\u003cbr\u003eSealing the pores helps prevent air escaping into the high build finish and forming bubbles during application and cure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does one pack cover?\u003c\/strong\u003e\u003cbr\u003eApproximately 18m² per 3L for one coat, depending on the floor condition.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen can I apply Epoxicote High Build?\u003c\/strong\u003e\u003cbr\u003eApproximately twelve hours at 20°C. The technical sheet gives twenty-four hours at 10°C; always allow for actual site conditions.\u003c\/p\u003e\u003ch3\u003eData Sheets\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-next-uk_tds_epoxicote_high_build_primer_01_23.pdf?v=1794400496\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-next-Epoxicote_High_Build_Primer___Curing_Agent__GB_EN__6_00__03_07_2026.pdf?v=1794400496\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet - Curing Agent (GB)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-next-Epoxicote_High_Build_Primer___Resin__GB_EN__8_00__03_07_2026.pdf?v=1794400496\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet - Resin (GB)\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"3L","offer_id":58281770320212,"sku":"EHBP3L","price":97.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-next-watco_epoxicotehb_primer_can_600x600_3b6f48f8-8f41-47be-be94-c16d0d30b6e1.jpg?v=1794400485"},{"product_id":"watco-dampguard","title":"Watco Dampguard","description":"\u003cp\u003eWatco Dampguard is a white damp-proofing coating for suitable bare masonry, brick and concrete surfaces. Its solvent based shellac formulation decorates and helps resist water seepage, leaving a smooth eggshell finish that can be wiped clean.\u003c\/p\u003e\n\u003cp\u003eApplied as a two-coat system, the first coat works into the substrate and the second builds the protective finish. It is useful for basement and other masonry areas affected by damp, and the manufacturer specifies resistance to water pressure up to 2 bar when correctly applied. Although floor slabs appear among Watco's general examples, the technical sheet excludes using Dampguard as a floor coating for foot traffic; select a suitable floor system where people will walk on the finish.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhite eggshell damp-proofing finish.\u003c\/li\u003e\n\u003cli\u003eCan be applied to dry or slightly damp masonry.\u003c\/li\u003e\n\u003cli\u003eSecond coat normally possible after four hours.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\u003cp\u003eUnpainted masonry must be at least thirty days old, clean and free of grease, contamination, mould and loose material. Remove efflorescence and rinse thoroughly after any appropriate cleaning treatment. Remove as much existing paint as possible, then clean and abrade retained sound coating. Repair active leaks and cracks with a suitable hydraulic plugging compound and let repairs dry before coating.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePack size \/ colour\u003c\/th\u003e\n\u003ctd\u003e5L \/ White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eComposition\u003c\/th\u003e\n\u003ctd\u003eSingle pack, solvent based shellac\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSmooth eggshell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum application temperature\u003c\/th\u003e\n\u003ctd\u003e10°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended coats\u003c\/th\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e12 months unopened\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eCoverage\u003c\/h3\u003e\u003cp\u003eFor conservative planning, use the technical sheet's rough-surface rate of approximately 8–10m² per 5L per coat. On smooth surfaces the first coat covers 8–10m², while the second may extend to 12–14m². Allow a conservative 1.6m²\/L per coat and enough material for both coats.\u003c\/p\u003e\u003ch3\u003eDirections for Use\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eStir thoroughly before use and do not thin.\u003c\/li\u003e\n\u003cli\u003eApply the first coat by brush or short pile roller, working it well into the surface. Keep to the specified coverage.\u003c\/li\u003e\n\u003cli\u003eAllow at least four hours before applying the second coat. Inspect for pinholes or missed areas and reapply where needed.\u003c\/li\u003e\n\u003cli\u003eProvide good ventilation during application and drying. Allow seven to fourteen days for full properties; wait at least fourteen days before applying another type of paint.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eLimitations\u003c\/h3\u003e\u003cp\u003eDo not apply over active running water. Not recommended for potable water, fish tanks, swimming pools, tank linings or floors taking foot traffic. Overpainting reduces the coating's mould-resistant benefit. The product contains flammable solvent, so follow the current safety sheet, keep away from ignition sources and ventilate the area. Store cool and dry and protect from frost.\u003c\/p\u003e\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan Dampguard be used as a walking surface?\u003c\/strong\u003e\u003cbr\u003eNo. The technical sheet excludes use as a floor coating taking foot traffic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I coat a damp wall?\u003c\/strong\u003e\u003cbr\u003eThe surface may be dry or slightly damp, but active leaks must be repaired first. Do not apply over running water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many coats are required?\u003c\/strong\u003e\u003cbr\u003eTwo coats. Work the first into the substrate and allow at least four hours before applying the second.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I paint over the finished coating?\u003c\/strong\u003e\u003cbr\u003eWait at least fourteen days. Applying another paint can reduce Dampguard's mould-resistant benefit.\u003c\/p\u003e\u003ch3\u003eData Sheets\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-next-uk_tds_dampguard_01_23.pdf?v=1794400496\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-next-Dampguard__GB_EN__1_00__30_11_2024.pdf?v=1794400496\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet (GB)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-next-dampguard_dampguard_advanced_lrv.pdf?v=1794400495\" target=\"_blank\" rel=\"noopener\"\u003eLight Reflective Values - LRV\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"5L","offer_id":58281770746196,"sku":"DPP5","price":88.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-next-dampguard.jpg?v=1794400504"},{"product_id":"watco-dampguard-advanced","title":"Watco Dampguard Advanced","description":"\u003cp\u003eWatco Dampguard Advanced is a water based epoxy coating for damp-proofing suitable interior masonry, concrete walls and floors. It combines a decorative Warm White finish with a hard wearing surface that is easier to scrub clean, making it useful in cellars, inspection pits, laundries and other working areas affected by damp.\u003c\/p\u003e\n\u003cp\u003eThe two component formulation is microporous, allowing moisture vapour to escape from the substrate. It is intended for properly prepared internal surfaces and resists short-term contact with a range of common chemicals. The matt to low-sheen appearance depends on the texture and number of coats. Two coats are normally required, with three recommended on very damp or high-suction backgrounds.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEpoxy damp-proofer for interior walls and floors.\u003c\/li\u003e\n\u003cli\u003eBreathable, low odour formulation.\u003c\/li\u003e\n\u003cli\u003eHard wearing, scrubbable finish.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\u003cp\u003eMake the surface as dry as possible, sound and free of contamination and loose material. Remove all existing coatings and weak surface layers where hydrostatic pressure is present. Concrete should normally be at least four weeks old. Remove laitance and grease by suitable methods, rinse away cleaner residues and allow to dry as far as possible. Remove fungal or algal growth and fully rinse any treatment residue.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePack size \/ colour\u003c\/th\u003e\n\u003ctd\u003e3L \/ Warm White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eComposition\u003c\/th\u003e\n\u003ctd\u003eTwo part, water based epoxy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eMatt to low sheen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior, following the technical sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum temperature\u003c\/th\u003e\n\u003ctd\u003e10°C; best results from 15°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePot life \/ shelf life\u003c\/th\u003e\n\u003ctd\u003eUp to 1 hour at 20°C \/ 24 months unopened\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eCoverage\u003c\/h3\u003e\u003cp\u003eApproximately 20m² per 3L per coat (about 6.67m²\/L). Allow for at least two coats. Mix fresh material for each coat: a mixed pack cannot be kept for the next day. For example, a 30m² floor needs two packs per coat, so four packs for two coats.\u003c\/p\u003e\u003ch3\u003eDirections for Use\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eStir and empty the complete resin into the activator container. Mix very thoroughly with a wide bladed tool until evenly coloured.\u003c\/li\u003e\n\u003cli\u003eApply two liberal coats with a medium pile roller or brush. Do not use a foam roller or overwork material that has started to cure.\u003c\/li\u003e\n\u003cli\u003eThe coating becomes tack-free in approximately eighteen hours at a constant 15°C. Apply the second coat within twenty-four hours, following the technical guidance.\u003c\/li\u003e\n\u003cli\u003eUse three coats where surface suction or dampness requires it. Maintain suitable warmth and ventilation throughout the work.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eLimitations\u003c\/h3\u003e\u003cp\u003eThe linked technical sheet specifies interior use. Do not steam clean or expose the finish to temperatures above 60°C. Remove food during application and cure. Test strong cleaners first. Breathability matters: carpet may be laid over the coating but should not be bonded down with an impermeable adhesive. A suitable breathable emulsion may be applied after abrasion, subject to compatibility. Protect stored material from freezing.\u003c\/p\u003e\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan it be applied to walls and floors?\u003c\/strong\u003e\u003cbr\u003eYes, on suitable prepared interior concrete, brick and masonry, following the technical sheet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many packs do I need for two coats?\u003c\/strong\u003e\u003cbr\u003eEach 3L pack covers about 20m² for one coat. Round up separately for each coat, because mixed material cannot be stored for the next coat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does mixed material last?\u003c\/strong\u003e\u003cbr\u003eUp to one hour at 20°C, with a shorter pot life in warmer conditions. Mix only what can be applied promptly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I glue carpet over it?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer allows loose-laid carpet but advises against bonding it down, as the adhesive can prevent moisture vapour escaping.\u003c\/p\u003e\u003ch3\u003eData Sheets\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-next-uk_tds_dampguard_advanced_01_23.pdf?v=1794400502\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-next-Dampguard_Advanced___Curing_Agent__GB_EN__7_00__02_07_2026.pdf?v=1794400496\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet - Curing Agent (GB)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-next-Dampguard_Advanced___Resin__GB_EN__7_00__02_07_2026.pdf?v=1794400496\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet - Resin (GB)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-next-dampguard_dampguard_advanced_lrv.pdf?v=1794400495\" target=\"_blank\" rel=\"noopener\"\u003eLight Reflective Values - LRV\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"3L","offer_id":58281771237716,"sku":"DSWHI3","price":126.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-next-dampguard_advanced.jpg?v=1794400518"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/collections\/Untitled_design_-_2026-02-20T123208.376.webp?v=1771592492","url":"https:\/\/andrewscoatings.co.uk\/collections\/watco.oembed?page=2","provider":"Andrews Coatings Ltd","version":"1.0","type":"link"}