{"product_id":"watco-asphalt-concrete-resurfacer","title":"Watco Asphalt \u0026 Concrete Resurfacer","description":"\u003cp\u003eWatco Asphalt \u0026amp; Concrete Resurfacer is a thick water based acrylic coating for improving the appearance of suitable worn concrete, asphalt and tarmac. It creates a flexible, sealed decorative surface for pedestrians and light-to-medium vehicle traffic, with Black, Dark Grey and Tile Red colour options.\u003c\/p\u003e\n\u003cp\u003eUse it on sound car parks, drives, paths and similar external areas where the surface is worn rather than structurally damaged. The ready-mixed coating can be rolled across the prepared substrate and applied in thin layers up to the specified maximum. It is a decorative resurfacer, not a pothole repair, roof membrane or damp proof membrane, so significant defects and waterproofing requirements need their own specified system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReady-mixed acrylic coating for suitable concrete and older asphalt.\u003c\/li\u003e\n\u003cli\u003eFlexible, matt finish with texture controlled by application.\u003c\/li\u003e\n\u003cli\u003eFor pedestrians and cars; excludes forklifts and HGVs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\u003cp\u003eRemove dirt, loose material and contamination. Clean oil and grease with a suitable degreaser such as Watco Bio-D and rinse as directed. Mechanically remove as much old paint as possible; any retained coating must be firmly bonded and abraded. Asphalt and tarmac should be more than three months old. The surface must not be wet, although slight damp can be acceptable as directed.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePack size \/ colours\u003c\/th\u003e\n\u003ctd\u003e25kg \/ Black, Dark Grey and Tile Red\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eComposition\u003c\/th\u003e\n\u003ctd\u003eSingle pack, water based acrylic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eExterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum application thickness\u003c\/th\u003e\n\u003ctd\u003e2mm per layer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication conditions\u003c\/th\u003e\n\u003ctd\u003eDry weather; plan for at least 15°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e24 months unopened\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eCoverage\u003c\/h3\u003e\u003cp\u003eApproximately 15m² per 25kg at 2mm thickness (0.6m²\/kg). Actual consumption depends on texture. One coat is usually sufficient; badly worn areas can need further thin coats, increasing material use.\u003c\/p\u003e\u003ch3\u003eDirections for Use\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eStir well with a wide bladed tool to redisperse any settled material. Never add water to the product.\u003c\/li\u003e\n\u003cli\u003ePour in manageable ribbons and spread using a suitable roller or squeegee. Keep each layer at or below 2mm.\u003c\/li\u003e\n\u003cli\u003eIf further coats are required, wait until the first has dried. A suitable textured roller can create more surface texture.\u003c\/li\u003e\n\u003cli\u003eAllow approximately twenty-four hours before light traffic at 10–15°C, or fifteen to twenty hours at 15–30°C. Cars need the longer vehicle-curing period in the technical sheet, generally two to three days depending on temperature.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eLimitations\u003c\/h3\u003e\u003cp\u003eDo not use on mastic asphalt, for forklift or HGV areas, or as a structural repair. Do not apply in cold, damp weather or when rain is forecast; protect from rain for the specified drying period. The coating does not correct poor drainage and may increase puddling where water already collects. Significant moving cracks can reappear through the coating. Confirm that the selected system suits the actual surface and traffic.\u003c\/p\u003e\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan forklifts use the coated area?\u003c\/strong\u003e\u003cbr\u003eNo. The manufacturer specifies pedestrians and cars, not HGV or forklift traffic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it a liquid damp proof membrane?\u003c\/strong\u003e\u003cbr\u003eNo. It is a decorative resurfacer and should not be specified as a DPM or roof waterproofing membrane.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow thickly can I apply it?\u003c\/strong\u003e\u003cbr\u003eNo more than 2mm per layer. Further thin coats can be added once the earlier coat has dried.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use it on new tarmac?\u003c\/strong\u003e\u003cbr\u003eThe technical sheet specifies asphalt and tarmac more than three months old. Check suitability before coating the actual surface.\u003c\/p\u003e\u003ch3\u003eData Sheets\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-coating-asphalt___concrete_resurfacer.pdf?v=1794406912\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-coating-Asphalt___Concrete_Resurfacer__GB_EN__5_00__26_05_2026.pdf?v=1794406912\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet (GB)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-coating-asphalt_concrete_resurfacer_lrv.pdf?v=1794406911\" target=\"_blank\" rel=\"noopener\"\u003eLight Reflective Values - LRV\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"25kg \/ Black","offer_id":58283637965140,"sku":"AR25BLK","price":190.8,"currency_code":"GBP","in_stock":true},{"title":"25kg \/ Dark Grey","offer_id":58283637997908,"sku":"AR25DGRY","price":190.8,"currency_code":"GBP","in_stock":true},{"title":"25kg \/ Tile Red","offer_id":58283638030676,"sku":"AR25TRD","price":190.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-coating-20-asphalt_concrete_resurfacer.jpg?v=1794406992","url":"https:\/\/andrewscoatings.co.uk\/products\/watco-asphalt-concrete-resurfacer","provider":"Andrews Coatings Ltd","version":"1.0","type":"link"}