{"product_id":"watco-asphalt-easy-fill","title":"Watco Asphalt Easy Fill","description":"\u003cp\u003eWatco Asphalt Easy Fill is a flexible black sealant for cracks in asphalt and tarmac. Its rubberised bitumen formulation seals the opening and helps protect the surface against water ingress and erosion. The cartridge fits a standard skeleton gun, making it convenient for small repairs along a crack or joint.\u003c\/p\u003e\u003cp\u003eIt can also be used on concrete, metal, stone and brick, with compatibility checked where needed. The sealant moves with the substrate and is suitable for indoor and outdoor applications. Use it where a flexible seal is needed around local surface damage and the joint dimensions fall within Watco’s guidance.\u003c\/p\u003e\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\u003cp\u003eClean the sides of the crack or joint and remove dust, loose debris, grease and contamination that could affect adhesion. Allow the surface to dry. Check the width and depth along the run before estimating the number of cartridges, since a changing profile uses a different amount of sealant.\u003c\/p\u003e\u003cp\u003ePrepare the whole area before opening the cartridge. The nozzle allows controlled placement along the gap, while a standard cartridge gun provides steady pressure as you work.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePack size is 310ml. The single-pack sealant is black.\u003c\/li\u003e\n\u003cli\u003eComposition is rubberised bitumen emulsion.\u003c\/li\u003e\n\u003cli\u003eMovement capability is approximately ±5%, as stated in the technical sheet.\u003c\/li\u003e\n\u003cli\u003eAllow approximately 24 hours to dry in dry conditions.\u003c\/li\u003e\n\u003cli\u003eGuide coverage is about 3m at a 10mm-wide × 10mm-deep section.\u003c\/li\u003e\n\u003cli\u003eThe technical sheet gives 5.3m at 10mm wide × 6mm deep, or 1m at 25mm wide × 12mm deep.\u003c\/li\u003e\n\u003cli\u003eShelf life is 24 months in an unopened cartridge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDirections for Use\u003c\/h3\u003e\u003cp\u003eCut the cartridge tip without damaging its thread. Trim the nozzle at 45 degrees and screw it securely onto the cartridge. Fit it into the skeleton gun and apply along the prepared crack or joint, controlling the flow so the gap is filled consistently.\u003c\/p\u003e\u003cp\u003eFollow the pack instructions for finishing and allow the sealant to dry before returning the repaired area to use. Keep food away during application and curing, and refer to the safety sheet for handling advice.\u003c\/p\u003e\u003ch3\u003eLimitations\u003c\/h3\u003e\u003cp\u003eAsphalt Easy Fill is unsuitable for EPDM rubber roofs. Check compatibility with other materials if uncertain. Store in shaded, dry conditions between 5°C and 25°C and protect from freezing.\u003c\/p\u003e\u003cp\u003eCoverage figures are guides to a consistent joint section. Make allowance for variations in depth and application waste when ordering. For larger broken-out asphalt defects, check the repair depths of \u003ca href=\"\/products\/watco-concrex-asphalt-repair\"\u003eConcrex Asphalt Repair\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat gun do I need?\u003c\/strong\u003e\u003cbr\u003eThe 310ml cartridge fits a standard skeleton or cartridge gun.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much will one cartridge cover?\u003c\/strong\u003e\u003cbr\u003eAllow about 3m at 10mm wide and 10mm deep. Smaller sections cover more length, and wider or deeper gaps consume more sealant.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it remain flexible?\u003c\/strong\u003e\u003cbr\u003eYes. It is a flexible rubberised bitumen sealant, with approximately ±5% movement capability stated in the technical sheet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long should it dry?\u003c\/strong\u003e\u003cbr\u003eAllow approximately 24 hours in dry conditions. Follow the pack instructions and check the repair before returning it to use.\u003c\/p\u003e\u003ch3\u003eData Sheets\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-joints-11nov-sheet-3.pdf?v=1794395437\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-joints-11nov-sheet-1.pdf?v=1794395437\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet (GB)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-joints-11nov-sheet-2.pdf?v=1794395437\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet (GBNI)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Watco","offers":[{"title":"310ml","offer_id":58277876171092,"sku":"AEFILL310","price":14.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-joints-easy-1.jpg?v=1794395460","url":"https:\/\/andrewscoatings.co.uk\/products\/watco-asphalt-easy-fill","provider":"Andrews Coatings Ltd","version":"1.0","type":"link"}