{"product_id":"watco-bitu-mend-pour-and-restore","title":"Watco Bitu-Mend Pour \u0026 Restore","description":"\u003cp\u003eWatco Bitu-Mend Pour \u0026amp; Restore is a pourable epoxy repair compound for shallow damage in asphalt and tarmac. It restores pitted, worn, cracked and dished areas, helping create a more even surface in car parks, yards and pavements.\u003c\/p\u003e\u003cp\u003eThe mixed material flows into shallow defects and can be spread with a trowel to follow the surrounding surface. A granite finishing aggregate is scattered over the wet repair to produce a black, slip-resistant finish. This makes it useful for resurfacing local areas of deteriorated asphalt where a deep pothole filler would be difficult to spread in a thin section.\u003c\/p\u003e\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\u003cp\u003eRemove loose stones, dirt, oil and other contamination from the repair. Brush out the area thoroughly and leave a sound base. The surface should preferably be dry, although slight dampness is acceptable. Avoid leaving loose debris that could interfere with adhesion or the finished profile.\u003c\/p\u003e\u003cp\u003eCheck the depth across the whole area before mixing. Pour \u0026amp; Restore is designed for shallow resurfacing between 6.5mm and 20mm thick. Plan the work so the mixed compound can be placed and finished within its short working life.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePack size: 15kg; finished colour: black.\u003c\/li\u003e\n\u003cli\u003eType: pourable epoxy asphalt repair compound with finishing aggregate.\u003c\/li\u003e\n\u003cli\u003eCoverage: approximately 1m² per pack at 10mm thick.\u003c\/li\u003e\n\u003cli\u003eApplication depth: 6.5–20mm.\u003c\/li\u003e\n\u003cli\u003eWorking life: approximately 15 minutes at 20°C, shorter in warmer conditions.\u003c\/li\u003e\n\u003cli\u003eTouch dry: approximately 1 hour at 20–25°C.\u003c\/li\u003e\n\u003cli\u003eReady for traffic: approximately 16 hours at 20–25°C.\u003c\/li\u003e\n\u003cli\u003eShelf life: 24 months in unopened containers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDirections for Use\u003c\/h3\u003e\u003cp\u003eAdd the curing agent and, where appropriate, the accelerator to the resin and aggregate in the outer bucket. Mix thoroughly with a wide-bladed tool, ensuring the sides and base are incorporated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo not add the accelerator if the temperature is above 23°C, or if you need a longer working life for several small repairs.\u003c\/strong\u003e Follow the technical data sheet for the mixing sequence. Pour into the prepared area and spread with a trowel. Before the compound cures, scatter the supplied finishing aggregate over the surface to complete the repair.\u003c\/p\u003e\u003ch3\u003eLimitations\u003c\/h3\u003e\u003cp\u003eUse for shallow resurfacing rather than deep potholes. For deeper defects, consider \u003ca href=\"\/products\/watco-bitu-mend-deep-fill\"\u003eWatco Bitu-Mend Deep Fill\u003c\/a\u003e or \u003ca href=\"\/products\/watco-bitu-mend-advanced\"\u003eWatco Bitu-Mend Advanced\u003c\/a\u003e, checking their individual depth requirements. Coverage varies with depth and surface condition. Keep traffic off until sufficiently cured; cooler conditions extend curing times. Store above 10°C and protect from freezing.\u003c\/p\u003e\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat type of asphalt damage can it repair?\u003c\/strong\u003e\u003cbr\u003eIt is designed for shallow, worn, pitted, cracked or dished asphalt and tarmac, including local repairs in car parks, yards and pavements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow thick should I apply it?\u003c\/strong\u003e\u003cbr\u003eApply between 6.5mm and 20mm thick. One 15kg pack covers approximately 1m² at 10mm depth.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should I leave out the accelerator?\u003c\/strong\u003e\u003cbr\u003eDo not add it when the temperature is above 23°C, or when a longer working life is needed for several small repairs. Follow the technical data sheet's mixing instructions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen can traffic use the repaired area?\u003c\/strong\u003e\u003cbr\u003eAt 20–25°C, the typical traffic-ready time is 16 hours. Lower temperatures extend curing time; keep traffic off until the material has cured sufficiently.\u003c\/p\u003e\u003ch3\u003eData Sheets\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-pour-datasheet-13.pdf?v=1793979880\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-pour-datasheet-14.pdf?v=1793979879\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Accelerator (GB)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-pour-datasheet-15.pdf?v=1793979880\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Curing Agent (GB)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-pour-datasheet-16.pdf?v=1793979879\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Resin (GB)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-pour-datasheet-17.pdf?v=1793979880\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Scatter Aggregate (GB)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-pour-datasheet-18.pdf?v=1793979879\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Accelerator (GBNI)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-pour-datasheet-19.pdf?v=1793979880\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Curing Agent (GBNI)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-pour-datasheet-20.pdf?v=1793979879\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Resin (GBNI)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-pour-datasheet-21.PDF?v=1793979879\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet – Scatter Aggregate (GBNI)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Watco","offers":[{"title":"15kg","offer_id":58185022964052,"sku":"BITUPR15","price":140.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-pour-repair-1.jpg?v=1793979762","url":"https:\/\/andrewscoatings.co.uk\/products\/watco-bitu-mend-pour-and-restore","provider":"Andrews Coatings Ltd","version":"1.0","type":"link"}