{"product_id":"watco-flowpatch-asphalt-repair","title":"Watco Flowpatch Asphalt Repair","description":"\u003cp\u003eWatco Flowpatch Asphalt Repair is a pourable repair mortar for holes, dished areas and worn patches in asphalt and tarmac. Its fibre-reinforced polymer and cement blend mixes with water to form a slurry that flows into the prepared repair. It is suitable for car parks, loading areas, drives, paths and internal asphalt floors.\u003c\/p\u003e\u003cp\u003eApply it from 5mm to 100mm deep in one layer. The dark grey repair can accept heavy traffic after curing, making it a practical choice for maintenance in working areas. The flowable consistency is best suited to reasonably level surfaces where the material can settle into the damage.\u003c\/p\u003e\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\u003cp\u003eAsphalt and tarmac should be at least six months old. Brush out loose material, remove grease and oil, and leave a sound base. Damp surfaces are acceptable, but the area should not be saturated.\u003c\/p\u003e\u003cp\u003eCheck the depth across the repair and position the mixing container nearby. Have clean water, measuring containers and tools ready before mixing. The short working life means preparation and material placement need to follow closely together.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePack size is 25kg. The finished repair is dark grey.\u003c\/li\u003e\n\u003cli\u003eCoverage is approximately 0.5m² at 25mm thick.\u003c\/li\u003e\n\u003cli\u003eApplication depth is 5–100mm in one layer.\u003c\/li\u003e\n\u003cli\u003eMinimum application temperature is 5°C.\u003c\/li\u003e\n\u003cli\u003eMix one part water with three parts powder by volume.\u003c\/li\u003e\n\u003cli\u003eWorking life is approximately 5–10 minutes at 20°C.\u003c\/li\u003e\n\u003cli\u003eAbove 15°C, allow 30–60 minutes for foot traffic and 2–3 hours for cars, lorries and forklifts.\u003c\/li\u003e\n\u003cli\u003eAt 5°C, the technical sheet advises allowing 24 hours.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDirections for Use\u003c\/h3\u003e\u003cp\u003eMeasure the water into a suitable container, then gradually add the powder while stirring. Mix until the colour is even and the consistency is smooth and pourable. Prepare only as much as can be placed within a few minutes.\u003c\/p\u003e\u003cp\u003ePour into the prepared damage and use a trowel if necessary to distribute the mix. Full strength is achieved at 5mm, with feathering limited to the repair perimeter. For damage deeper than 100mm, build in layers no thicker than 100mm and allow 12 hours between layers. Wash tools with water before the mortar dries.\u003c\/p\u003e\u003ch3\u003eLimitations\u003c\/h3\u003e\u003cp\u003eKeep traffic off until the repair has cured for the conditions on site. Lower temperatures extend curing, so account for both temperature and the repair profile when scheduling reopening.\u003c\/p\u003e\u003cp\u003eStore unopened material in dry, frost-free conditions and use within its 12-month shelf life. Actual coverage varies with depth and the shape of the damage. Read the technical sheet and safety information before mixing.\u003c\/p\u003e\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I apply it to damp asphalt?\u003c\/strong\u003e\u003cbr\u003eYes, provided the surface is damp rather than saturated and is sound, clean and free from contamination.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow deep can I fill in one layer?\u003c\/strong\u003e\u003cbr\u003eApply from 5mm to 100mm. For deeper holes, use layers no thicker than 100mm and allow 12 hours between layers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen can vehicles use the repair?\u003c\/strong\u003e\u003cbr\u003eAbove 15°C, allow approximately 2–3 hours for cars, lorries and forklifts. At 5°C, allow 24 hours as a guide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much water should I add?\u003c\/strong\u003e\u003cbr\u003eMix one part water with three parts powder by volume, following the pack instructions. Add the powder gradually and use the mixed material immediately.\u003c\/p\u003e\u003ch3\u003eData Sheets\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-flow-11nov-sheet-3.pdf?v=1794395922\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-flow-11nov-sheet-1.pdf?v=1794395921\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet (GB)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-flow-11nov-sheet-2.pdf?v=1794395921\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet (GBNI)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Watco","offers":[{"title":"25kg","offer_id":58278213648724,"sku":"XFPAR25NC","price":162.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-next-flow-1.jpg?v=1794395911","url":"https:\/\/andrewscoatings.co.uk\/products\/watco-flowpatch-asphalt-repair","provider":"Andrews Coatings Ltd","version":"1.0","type":"link"}