{"product_id":"watco-flowpatch-deep-fill","title":"Watco Flowpatch Deep Fill","description":"\u003cp\u003e\u003cstrong\u003eWatco Flowpatch Deep Fill\u003c\/strong\u003e is a fibre-reinforced, \u003cstrong\u003epourable concrete repair compound\u003c\/strong\u003e for deep holes in level floors. Add water, mix and pour to rebuild a contained repair without having to work a stiff mortar into every corner. Its fast-setting cement-based formulation is suited to maintenance where a damaged floor needs to be returned to service promptly.\u003c\/p\u003e\n\u003cp\u003eUse this deep hole repair filler indoors or outdoors at depths from \u003cstrong\u003e10mm to 200mm\u003c\/strong\u003e. It is designed for heavily trafficked concrete floors and can accept forklift traffic in approximately two hours at normal ambient temperatures. That makes it a useful option when planning local floor repairs around access and working schedules.\u003c\/p\u003e\n\u003cp\u003eFlowpatch Deep Fill can be applied to damp concrete once standing water and contamination have been removed. No primer is required. The mixed material flows into the repair and levels with minimal trowelling, leaving a grey finish. The short working time makes preparation especially important: have the hole ready, measure the water and mix beside the repair.\u003c\/p\u003e\n\u003cp\u003eChoose the repair compound to suit the floor shape. For ramps, steps or exposed edges, a trowel-applied \u003ca href=\"\/products\/watco-concrex-carbon-fibre-epoxy-repair-mortar\"\u003eWatco Concrex mortar\u003c\/a\u003e is more appropriate. For shallower patching, see \u003ca href=\"\/products\/watco-flowpatch\"\u003eWatco Flowpatch\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\u003cp\u003eRemove oil, dirt and loose concrete. Wire-brush where possible and cut edges to depth in heavy-wear areas, rather than leaving a thin feather edge. The surface may be damp but must not be wet.\u003c\/p\u003e\n\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize \/ Colour\u003c\/th\u003e\n\u003ctd\u003e25kg \/ Grey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eComposition\u003c\/th\u003e\n\u003ctd\u003eFibre-reinforced cement and polymer powder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication depth\u003c\/th\u003e\n\u003ctd\u003e10–200mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eApproximately 0.25m² at 50mm per pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking time\u003c\/th\u003e\n\u003ctd\u003e5–10 minutes at 20°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTraffic\u003c\/th\u003e\n\u003ctd\u003eFoot traffic: 30–60 minutes; forklifts: approximately 2 hours at ambient temperatures\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication temperature\u003c\/th\u003e\n\u003ctd\u003e5°C and above recommended; cold conditions extend curing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e12 months, unopened\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eDirections for Use\u003c\/h3\u003e\u003cp\u003eMeasure 200ml of water per kilogram of powder. Put water in the mixing container, add powder gradually and stir to a smooth, pourable slurry. Pour immediately and finish with minimal trowelling. Mix only what can be placed within the working time. Wash tools before the material sets.\u003c\/p\u003e\n\u003ch3\u003eLimitations\u003c\/h3\u003e\u003cp\u003eDo not add excess water or re-stir material that has started to harden. Avoid slopes, uncontained edges and wet substrates. Store dry and protect from freezing. Read the safety sheets before handling.\u003c\/p\u003e\n\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow deep can Flowpatch Deep Fill be applied?\u003c\/strong\u003e\u003cbr\u003eUse it for repairs 10–200mm deep on level concrete. Its pourable consistency needs a contained repair area.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does a pack cover?\u003c\/strong\u003e\u003cbr\u003eA 25kg pack covers approximately 0.25m² at 50mm depth, equivalent to 0.5m² at 25mm. Allow more material for deeper holes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen can forklifts use the repair?\u003c\/strong\u003e\u003cbr\u003eApproximately two hours at normal ambient temperatures. Cold conditions slow curing; allow around 24 hours at 5°C.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it repair steps or ramps?\u003c\/strong\u003e\u003cbr\u003eUse a trowel-applied Concrex mortar for slopes, steps and exposed edges. Flowpatch Deep Fill is intended for level, contained holes.\u003c\/p\u003e\u003ch3\u003eData Sheets\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-flowpatch-deep-fill-tds.pdf?v=1793799028\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-flowpatch-deep-fill-sds-gb.pdf?v=1793799028\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet (GB)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-flowpatch-deep-fill-sds-gbni.pdf?v=1793799028\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet (GBNI)\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"25kg","offer_id":58131924713812,"sku":"XFPDF25NC","price":132.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-flow-product-1.jpg?v=1793798984","url":"https:\/\/andrewscoatings.co.uk\/products\/watco-flowpatch-deep-fill","provider":"Andrews Coatings Ltd","version":"1.0","type":"link"}