{"product_id":"watco-powerfloat-sealer-anti-slip","title":"Watco Powerfloat Sealer Anti Slip","description":"\u003cp\u003eWatco Powerfloat Sealer Anti Slip gives suitable smooth concrete a clear protective finish with a fine slip-resistant texture. Designed for indoor power floated and other dense concrete floors, this two part epoxy sealer combines dustproofing and surface protection with an aggregate-enhanced finish.\u003c\/p\u003e\n\u003cp\u003eChoose Gloss or Matt to suit the appearance of the floor. The water based resin is applied by roller, usually in one coat, without a separate primer. It is useful where a smooth industrial floor needs clear protection and improved grip. Correct cleaning, even application and good ventilation remain essential; Watco recommends mechanical preparation where practical, especially on very highly polished concrete.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eClear, finely textured anti-slip epoxy sealer.\u003c\/li\u003e\n\u003cli\u003eGloss and Matt options for interior concrete.\u003c\/li\u003e\n\u003cli\u003eAggregate included in the resin component.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\u003cp\u003eNew concrete should dry for at least twenty-eight days. Remove oil, grease, dust and weak material and ensure the floor is clean and dry. Retained coatings must be sound and firmly bonded. Highly polished surfaces may need mechanical abrasion; confirm suitability and test a small area where appearance or adhesion is critical.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePack size\u003c\/th\u003e\n\u003ctd\u003e5L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eClear, fine textured; Gloss or Matt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eComposition\u003c\/th\u003e\n\u003ctd\u003eTwo part, water based epoxy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication range\u003c\/th\u003e\n\u003ctd\u003e15–30°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePot life\u003c\/th\u003e\n\u003ctd\u003eUp to 2 hours at 20°C; apply promptly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnopened shelf life\u003c\/th\u003e\n\u003ctd\u003e12 months, as listed on the product page\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eCoverage\u003c\/h3\u003e\u003cp\u003eApproximately 40m² per 5L per coat (8m²\/L). Spread the mixed pack across a measured area of at least 40m². Avoid a heavy film: correct application helps the resin dry clear and the texture develop evenly.\u003c\/p\u003e\u003ch3\u003eDirections for Use\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eStir both components thoroughly, including the aggregate-bearing resin, to distribute the contents evenly.\u003c\/li\u003e\n\u003cli\u003eCombine the complete resin and curing agent in the outer tin and mix for two to three minutes, scraping the base and sides.\u003c\/li\u003e\n\u003cli\u003eDecant into a tray and apply with a medium pile roller. Use a brush for edges and maintain an even spread.\u003c\/li\u003e\n\u003cli\u003eProvide a through draught during cure. Plan for approximately sixteen hours at 15–20°C before general traffic and allow longer in less favourable conditions.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eLimitations\u003c\/h3\u003e\u003cp\u003eFor indoor use. Improved slip resistance does not remove the need to control spills and keep floors clean. Do not apply below 15°C or above 30°C. Thick application or inadequate ventilation can leave the finish cloudy. Not for bare metal; obtain advice for self-levelling compounds. Keep food out of the work area during application and cure. Condition material at 15–25°C before use and protect from frost.\u003c\/p\u003e\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow does it differ from standard Powerfloat Sealer?\u003c\/strong\u003e\u003cbr\u003eThe Anti Slip version contains aggregate to produce a fine textured, slip-resistant finish. Standard Powerfloat Sealer produces a smooth finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the finish clear?\u003c\/strong\u003e\u003cbr\u003eYes. The liquid starts white or off-white and should cure clear with correct spreading, warmth and ventilation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I add separate grit?\u003c\/strong\u003e\u003cbr\u003eThe technical sheet states the aggregate is pre-blended into the resin. Stir thoroughly to distribute it before combining the components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much floor does it cover?\u003c\/strong\u003e\u003cbr\u003eApproximately 40m² per 5L for one coat. Measure the area and avoid applying the pack too thickly.\u003c\/p\u003e\u003ch3\u003eData Sheets\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-next-powerfloat_sealer_tds.pdf?v=1794400496\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-next-powerfloat_sealer_anti_slip_curing_agent_gb.pdf?v=1794400496\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet - Gloss Curing Agent (GB)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-next-Powerfloat_Sealer_Anti_Slip___Resin__GB_EN__5_00__17_06_2026.pdf?v=1794400496\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet - Gloss Resin (GB)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-next-powerfloat_sealer_matt_anti_slip_curing_agent_gb.pdf?v=1794400496\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet - Matt Curing Agent (GB)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-next-Powerfloat_Sealer_Matt_Anti_Slip___Resin__GB_EN__1_00__18_06_2026.pdf?v=1794400495\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet - Matt Resin (GB)\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"5L \/ Gloss","offer_id":58281767469396,"sku":"PSAS5","price":138.2,"currency_code":"GBP","in_stock":true},{"title":"5L \/ Matt","offer_id":58281767502164,"sku":"PSMAS5","price":138.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-next-watco_specialist_powerfloatsealerantislip_can.png?v=1794400471","url":"https:\/\/andrewscoatings.co.uk\/products\/watco-powerfloat-sealer-anti-slip","provider":"Andrews Coatings Ltd","version":"1.0","type":"link"}