{"product_id":"watco-roofite-pour-restore","title":"Watco Roofite Pour \u0026 Restore","description":"\u003cp\u003eWatco Roofite Pour \u0026amp; Restore is a pourable bitumen-based roof repair coating for refurbishing suitable flat roof areas. Rubber, fibres and fine aggregate create a thicker flexible layer that can be spread with a squeegee, making it useful where a brush-applied coating is less practical across a larger area.\u003c\/p\u003e\n\u003cp\u003eIt is designed for compatible concrete, felt and asphalt roofs and helps bridge minor cracks and splits. The coating can help smooth slightly uneven areas and reduce local puddling, although it does not replace correcting defective drainage or an unsound roof. Its black appearance weathers towards matt grey over time.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePour-and-spread roof refurbishment coating.\u003c\/li\u003e\n\u003cli\u003eReinforced with rubber, fibres and fine aggregate.\u003c\/li\u003e\n\u003cli\u003eSuitable for specified concrete, felt and asphalt roofs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\u003cp\u003eCheck the roof for soundness and remove dirt, loose material and growth. Repair defects beyond the scope of the coating before starting. The surface should be as dry as possible for planned work. Follow the Roofite system guidance for porous surfaces, joints and local reinforcement. If asbestos-containing materials are present, obtain specialist advice and do not disturb them.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePack size\u003c\/th\u003e\n\u003ctd\u003e5kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eComposition\u003c\/th\u003e\n\u003ctd\u003eSingle pack, rubber, fibre and fine aggregate in bitumen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack, weathering towards matt grey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eExterior roofs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum application temperature\u003c\/th\u003e\n\u003ctd\u003e5°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e24 months unopened\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eCoverage\u003c\/h3\u003e\u003cp\u003eApproximately 1.25m² per 5kg at 3mm thickness, or 1.85m² at 2mm according to the Roofite range sheet. For planning at 3mm, allow 0.25m²\/kg. Measure the area and account for the thickness needed for the specified repair.\u003c\/p\u003e\u003ch3\u003eDirections for Use\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eComplete preparation and check compatibility with the existing roof.\u003c\/li\u003e\n\u003cli\u003ePour the material onto the prepared area and spread with a suitable squeegee.\u003c\/li\u003e\n\u003cli\u003eMaintain an even layer at the specified thickness. Treat details, splits and joints using the appropriate Roofite system instructions.\u003c\/li\u003e\n\u003cli\u003eThe range sheet guides approximately twenty-four hours in dry conditions; actual drying depends on weather, thickness and the substrate. Keep the area protected while the repair dries.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eLimitations\u003c\/h3\u003e\u003cp\u003eThis is a roof repair coating, not a structural repair or a solution to major roof movement and drainage defects. Do not assume it is suitable for regular pedestrian traffic. The Roofite range excludes EPDM rubber roofs and direct waterproofing over bare timber. Avoid trapping moisture beneath broad repairs on porous surfaces. Store away from ignition sources and frost. Confirm the current GB safety sheet with Watco before use; the product page's GB-labelled link currently serves an Irish document.\u003c\/p\u003e\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow is it applied?\u003c\/strong\u003e\u003cbr\u003ePour onto the prepared roof and spread with a suitable squeegee to the specified thickness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat area will one pack cover?\u003c\/strong\u003e\u003cbr\u003eApproximately 1.25m² at 3mm thickness, or 1.85m² at 2mm, from a 5kg pack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich roof materials are listed?\u003c\/strong\u003e\u003cbr\u003eThe product page lists concrete, felt and asphalt. Check compatibility with the actual existing roof system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill it solve badly ponding water?\u003c\/strong\u003e\u003cbr\u003eIt can help smooth minor unevenness, but defective drainage, structural problems or major depressions need separate assessment and repair.\u003c\/p\u003e\u003ch3\u003eData Sheets\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-roof-batch-Roofite_Range_2026.pdf?v=1794401452\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"5kg","offer_id":58282013884756,"sku":"RPR05","price":61.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-roof-batch-2-roofite_pr_uk_fr_de_web.jpg?v=1794401429","url":"https:\/\/andrewscoatings.co.uk\/products\/watco-roofite-pour-restore","provider":"Andrews Coatings Ltd","version":"1.0","type":"link"}