{"product_id":"watco-weatherguard","title":"Watco Weatherguard","description":"\u003cp\u003eWatco Weatherguard is a White elastomeric exterior wall coating that combines a decorative finish with flexible weather protection. Its water based acrylic polymer formulation allows normal surface movement while helping protect sound masonry from exposure to changing weather.\u003c\/p\u003e\n\u003cp\u003eUse it on suitable brick, concrete, stone, render and compatible prepared painted surfaces where a breathable matt or low-sheen finish is wanted. The coating is applied by brush or roller and is designed to remain flexible as the substrate expands and contracts. It also provides an easier-to-clean surface than untreated porous masonry. The manufacturer describes long-term weathering performance, but preparation, exposure and correct application remain central to the result.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFlexible acrylic protection for exterior masonry.\u003c\/li\u003e\n\u003cli\u003eWhite matt to low-sheen finish, depending on the substrate.\u003c\/li\u003e\n\u003cli\u003eBreathable coating applied by brush or roller.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSurface Preparation\u003c\/h3\u003e\u003cp\u003eRemove loose material, contamination and defective paint. Treat mould, moss and other growth with a suitable product and follow its cleaning instructions. Abrade hard glossy retained paint to provide a key. Wash where required, rinse thoroughly and allow the surface to dry. Repair minor defects using a suitable exterior filler or sand and cement repair.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePack size \/ colour\u003c\/th\u003e\n\u003ctd\u003e10L \/ White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eComposition\u003c\/th\u003e\n\u003ctd\u003eSingle pack, water based elastomeric acrylic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eExterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended coats\u003c\/th\u003e\n\u003ctd\u003e2, following the current product specification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication temperature\u003c\/th\u003e\n\u003ctd\u003eUse 10°C or above, following the product-page minimum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e24 months unopened\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eCoverage\u003c\/h3\u003e\u003cp\u003eApproximately 40m² per 10L per coat (4m²\/L). Allow material for two coats, giving a nominal finished area of about 20m² per container before allowances for the surface condition.\u003c\/p\u003e\u003ch3\u003eDirections for Use\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eBlend in any thin liquid on the surface as directed; the manufacturer advises blending rather than vigorous stirring.\u003c\/li\u003e\n\u003cli\u003eApply with a brush or suitable pile roller in one direction at the specified rate.\u003c\/li\u003e\n\u003cli\u003eAllow the first coat to dry, then apply the second in the opposite direction.\u003c\/li\u003e\n\u003cli\u003eTouch drying and overcoating guidance is around four to six hours at 20°C. Cooler temperatures or damp, humid conditions extend drying.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eLimitations\u003c\/h3\u003e\u003cp\u003eDo not apply in damp or humid weather or when rain is forecast within twenty-four hours. Make sure the substrate is dry and compatible before coating. The wood instructions exclude door and window frames and require complete removal of old paint from previously painted wood; do not treat the masonry guidance as universal timber approval. Keep food away during application and cure and protect stored material from freezing.\u003c\/p\u003e\u003ch3\u003eProduct FAQs\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs Weatherguard for exterior use?\u003c\/strong\u003e\u003cbr\u003eYes. It is an exterior decorative weatherproofing coating for suitable prepared substrates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many coats should I plan for?\u003c\/strong\u003e\u003cbr\u003eUse two coats in line with the current specification, at approximately 4m²\/L per coat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it be applied over existing paint?\u003c\/strong\u003e\u003cbr\u003eRetained masonry paint must be sound, cleaned and prepared. Remove defective coating and abrade glossy areas to provide a key.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I apply it when rain is expected?\u003c\/strong\u003e\u003cbr\u003eNo. The technical sheet says not to apply if rain is forecast within twenty-four hours or conditions are damp and humid.\u003c\/p\u003e\u003ch3\u003eData Sheets\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-coating-weatherguard.pdf?v=1794406912\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-coating-weatherguard_10_new_gb.pdf?v=1794406911\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet (GB)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-coating-weatherguard_lrv.pdf?v=1794406911\" target=\"_blank\" rel=\"noopener\"\u003eLight Reflective Values - LRV\u003c\/a\u003e\u003c\/p\u003e","brand":"Watco","offers":[{"title":"10L","offer_id":58283636490580,"sku":"WGD10WHI","price":164.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/9017\/6596\/files\/watco-coating-13-weatherguard_uk_fr_de_web.jpg?v=1794406949","url":"https:\/\/andrewscoatings.co.uk\/products\/watco-weatherguard","provider":"Andrews Coatings Ltd","version":"1.0","type":"link"}