AndCoat UltraGrip Adhesion Primer
£20.95 – £93.50
Description
Description
AndCoat UltraGrip Primer is a single pack, thin film adhesion promoter designed for use directly onto almost any substrate, without the need for sanding or keying. Designed for use onto non-ferrous metals; galvanised steel, aluminum, stainless steel, zinc, copper. In addition it will also adhere to glass, most plastics and other smooth dense surfaces. The UltraGrip primer is largely solving product – giving you the ability to coat tricky substrates that are usually difficult to paint or would require etching / sanding. It’s been designed to create sufficient adhesion for the topcoat with AndCoat UltraGrip having virtually no colour.
The AndCoat UltraGrip Adhesion Primer is also suitable to be applied onto smooth and non-porous concrete floors. Where adhesion is
Key Features:
- Touch Dry: 15 minutes – 45 minutes
- Recoat: 4 hours
- Practical Coverage: 20m2 / L
- Brush or roller application – cannot be sprayed due to viscosity
- Primer for smooth, dense surfaces and tricky substrates
- Excellent adhesion onto non-ferrous metals
- Low film thickness
- Almost clear in colour
- Ultimate problem solving primer
- Low cost per sq/m
- Can be overcoated by most types of Alkyds/Acrylics/water-based/oil-based coatings
How to use:
Ensure the surface is clean, dry and free from surface contamination by alkaline or high pressure cleaning. No need to key up the surface as it will adhere directly on. Remove aluminum / zinc corrosion using a suitable solution. If you’re in doubt of compatibility, we would advise to perform an adhesion test prior to full application. Usually only a single coat is required.
Related products:
Additional information
Brand | |
---|---|
Colour | |
Size |