AndCoat One Coat Metal Paint
£74.95
Colourshop
ColourShop® - CHOOSE A COLOUR
Choose your colour from the colour charts here.
SKU: N/A
Categories: Above the Waterline, AndCoat, Anti-Rust Primers, Direct to Metal, Fence Paint, Ferrous Metal, Garden, Home & garden, Marine Coatings, Metal fence, Metal Paints, Metal Primers, Metal protection, Metal Topcoats, Single Pack, Single Pack, Specialist Paints, Table & Chairs
Tags: Anti corrosive, direct to metal, metal paint, oil resistant, quick drying, steel paint, tintable, topcoat
Description
AndCoat One Coat is a quick air drying, anti corrosive alkyd based coating. Outstanding adhesion and extremely durable in exterior conditions. When cured, OneCoat Metal Paint has good resistance against oils, petrol, and various mineral spillages. Application onto suitably prepared mild-steel direct or with our AndCoat Shop Primer for additional long-term protection.
It is essential that all surfaces are clean, dry, and free from contamination. Abrading any areas of rust with a wire brush is recommended. It is recommended that vapor degreasing be used instead of conventional solvent degreasing methods in order to achieve maximum efficiency.
Spraying OneCoat Metal Paint conventionally or airlessly is an option. The temperature at which paint is applied should be as low as possible. In full cure, the coating can withstand temperatures as low as -5oC and as high as 140oC without breaking down. After applying the first coat or within 4 hours after applying the first coat, overcoating should be applied. This is to reduce the risk of lifting or pickling occurring.
AndCoat One Coat Metal Paint:
- Fully tintable to most Ral and BS colours
- Approximately 8m2 / L
- 75 Microns DFT
- Surface Dry in 30 mins at 20 oC
- Hard Dry 12 Hours at 20 oC
- Full Cure 7 days at 20 oC
- 45% (+/- 5%) Volume Solids
- Flash Point 22- 25 oC
AndCoat OneCoat Metal Paint is usually packed in 5 litre containers, but can be supplied in 25 and 205 litre containers on request.
Select the ‘ColourShop’ option for tinting and insert the Ral or Bs Number you’d like it to be tinted to.
Related Products:
Additional information
Weight | N/A |
---|---|
Colour | |
Brand | |
Select a Size |
Reviews
There are no reviews yet.
Related products
Rust-Oleum 2100 Hard Hat Topcoat
£10.95
Mathys PVDF Metal Cladding Primer
£53.95 Ex.VAT | £64.74 Inc.VAT
Rust-oleum 2500 Hard Hat Transparent Topcoat
£11.25 Ex.VAT | £13.50 Inc.VAT
Rust-Oleum 1017 / 2117 Galva Zinc-Alu
£12.45 – £15.95
Be the first to review “AndCoat One Coat Metal Paint”