AndCoat UltraGrip Adhesion Primer

AndCoat UltraGrip Primer – Universal Adhesion Promoter for Difficult Surfaces

AndCoat UltraGrip Primer is a single-pack, thin-film adhesion promoter designed to bond to almost any smooth or non-porous surface without sanding or etching. Ideal for non-ferrous metals such as galvanised steel, aluminium, stainless steel, zinc, and copper, it also adheres strongly to glass, plastics, and smooth concrete floors.

Formulated as a problem-solving primer, AndCoat UltraGrip provides excellent surface adhesion for a wide range of topcoats, including alkyd, acrylic, water-based, and oil-based systems. With a near-clear finish, it ensures strong adhesion without altering the final colour of the topcoat.

Key Features:

• Universal adhesion primer for difficult substrates

• Excellent adhesion on non-ferrous metals and smooth surfaces

• Suitable for galvanised steel, aluminium, plastics, glass, zinc, copper, and smooth concrete

• No sanding or keying required before application

• Touch dry in 15–45 minutes, recoatable after 4 hours

• Brush or roller application (not sprayable due to viscosity)

• Almost clear in colour with low film thickness

• Compatible with most alkyd, acrylic, water-based, and oil-based coatings

• Low cost per m² – ideal for professional and industrial use

Surface Preparation

Ensure the aera is clean and dry before applicaion.

Technical Data

• Coverage: 20 m²/L

• Touch Dry: 15–45 minutes

• Recoat Time: 4 hours

• Application: Brush or roller only

Directions for Use

Ensure the surface is clean, dry and free from surface contamination by alkaline or high pressure cleaning. No need to key up the surface as it will adhere directly on. Remove aluminum / zinc corrosion using a suitable solution. If you’re in doubt of compatibility, we would advise to perform an adhesion test prior to full application. Usually only a single coat is required.