Andrews CleanEdge Ceramic Interior
Litres required: 0.00L
Based on 4.0 m² per litre- Independent UK Manufacturing
Andrews CleanEdge Ceramic is a premium water-based interior paint formulated with advanced ceramic technology to deliver exceptional durability, superior opacity and a flawless finish.
Designed for modern living spaces, CleanEdge Ceramic offers Class 1 scrub resistance, fast drying times and excellent stain resistance, making it ideal for high-traffic areas such as kitchens, bathrooms, hallways and commercial interiors.
Its mould and mildew resistant formulation combined with outstanding adhesion ensures long-lasting performance even in high humidity environments. The high opacity ceramic system provides excellent coverage, reducing the need for multiple coats while delivering a smooth, professional finish.
Low odour and easy to apply, CleanEdge Ceramic is suitable for both professional decorators and high-end residential projects where durability and aesthetics matter.
Surface Preparation
All surfaces must be clean, dry and sound before application.
Previously Painted Surfaces
• Remove any flaking, peeling or unstable coatings.
• Key glossy or satin surfaces with fine abrasive paper.
• Clean thoroughly to remove dust, grease or contaminants.
• Spot prime bare patches as required.
New Plaster
• Allow plaster to fully cure (minimum 4 weeks).
• Apply a suitable mist coat before full application.
High Humidity Areas
• Treat any mould growth with a suitable fungicidal wash and allow to dry before painting.
Surfaces should be dry and free from dust prior to application.
Technical Data
Finish: Durable ceramic matt
Coverage: Approx. 10–12m² per litre (depending on substrate)
Touch Dry: 30 minutes
Recoat: 2 hours
Application Temperature: 5°C – 30°C
Application Methods: Brush, roller or spray
Scrub Rating: Class 1
VOC: Low
Thinning: Do not thin unless spraying (minimal water if required)
Clean Up: Water
Suitable for interior walls and ceilings including plaster, drywall, previously painted surfaces and prepared masonry.
Directions for Use
-
Stir thoroughly before use.
-
Apply evenly using a quality brush, roller or airless spray.
-
Maintain a wet edge to avoid lap marks.
-
Allow approximately 2 hours between coats.
-
Two coats recommended for best results.
Avoid application below 5°C or in excessively humid conditions.
Data Sheets
Use collapsible tabs for more detailed information that will help customers make a purchasing decision.
Ex: Shipping and return policies, size guides, and other common questions.
