EpoxyShield Maxx - 2 Pack Epoxy Floor Coating
- UK manufactured, trusted brands
Rust-Oleum EpoxyShield Maxx – Durable Water-Based Floor Coating for Heavy Traffic
Rust-Oleum EpoxyShield Maxx is a user-friendly, water-based epoxy floor coating designed for medium to heavy-duty traffic areas. With ultimate adhesion and durability, it delivers a long-lasting gloss finish, with optional non-skid or decorative effects, while resisting wear, impact, and abrasion from heavy foot and vehicle traffic.
Highly resistant to solvents, chemicals, and car tyres, EpoxyShield Maxx provides long-lasting protection for garages, workshops, and industrial floors. No primer is required, making application simple and efficient.
Key Features:
- Water-Based & User-Friendly – Easy to apply with no primer required
- For Medium to Heavy Traffic – Ideal for garages, workshops, and industrial floors
- Long-Lasting Gloss Finish – Optional non-skid or decorative effects
- High Chemical & Tyre Resistance – Withstands solvents, chemicals, and car tyres
- Impact & Abrasion Resistant – Durable under heavy foot and vehicle traffic
Surface Preparation
Repair any holes or cracks with EpoxyShield concrete repair products. If the floor is
previously painted, remove any loose paint by sanding and scraping. Remove oil and
grease using a scrub brush and EpoxyShield cleaner/degreaser. Rinse thoroughly with
fresh water afterwards. Remove all water and allow to dry completely. Wipe your fingers
over the clean, dry floor. If you see any dust or powder, repeat the rinsing until the floor is
clean. Wipe your fingers over the clean, dry floor. If you see any dust or powder on your
fingers, repeat the rinsing and scrubbing until the floor is clean.
Technical Data
Density (g/cm³): 1,27
Gloss Level: Satin
Solids content in volume: 63.6%
Mixing Ratio: Base : Activator = 3 : 1 (volume)
Directions for Use
Pour the contents of A into B and stir thoroughly for at least 3 minutes. Allow mixed product to stand (see table) before rolling the coating on to the surface. Do not leave container in direct sunlight. Mix again before applying. The product must be used within 1 to 2 hours of initial mixing (pot life, see table). This time decreases at higher temperatures. Do not mix Paint Chips with Epoxyshield® 5300 MAXX.
Apply when air (ambient) temperature is 15-35ºC and relative humidity is below 80%.
Concrete floors take a long time to warm up; make sure the previous day has also been at
least 15ºC prior to painting. Minimum floor temperature for painting is 13ºC. Painting in mid afternoon ensures the best cure.
After the full 60 minutes use a paint roller (20 cm) to apply an even coat of Epoxyshield®
5300 MAXX onto the surface. Apply in sections of 1,5 x 1,5 m so that Epoxyshield®
Decorative Chips can easily be scattered on the freshly coated surface. Maintain a wet
edge to prevent lap marks and gloss differences. Sprinkle the decorative paint chips onto
the wet film (note: this step may be skipped if chips are not desired. This will not affect the
performance of the coating). Immediately continue to coat the next section (note: fresh
paint can be applied over the loose chips that lay outside the previously painted area).
Data Sheets
Rust-Oleum EpoxyShield Maxx TDS
We aim to deliver your products as quickly, safely and efficiently as possible. Below you'll find a full overview of our delivery process, options, pricing and terms. If you have any questions or a time-sensitive order, our team is always happy to help — just give us a call on 01902 712286.
📦 Standard Delivery
-
Free delivery on all orders over £100 + VAT within UK mainland.
-
For orders under £100 + VAT, a standard shipping fee will apply at checkout.
-
Orders are typically delivered within 2–5 working days after receipt of cleared payment.
We use Parcelforce and FedEx as our main carriers, though this may vary based on location or size of your order.
⚠️ Important Notes on Delivery
-
Orders placed after 12 midday (Monday–Friday) are usually dispatched the next working day.
-
If you require urgent dispatch or Saturday delivery, please call us before placing your order.
-
Do not schedule contractors or start work until goods have arrived and been checked — we cannot be held responsible for project delays due to late or damaged deliveries.
🚚 Next Day & Timed Delivery Options
We offer express shipping for orders needing a quicker turnaround:
| Service | Typical Cost* (Ex. VAT) |
|---|---|
| Next Day Delivery | £10.50 |
| Next Day AM Delivery | £15.00 |
| Specialist Items | £22–£25+ |
*Pricing depends on order contents and size. For mixed/tinted paint or specialist coatings, next-day delivery may cost more due to courier restrictions.
Please contact us if your order is time-sensitive — we’ll confirm what options are available based on your products and location.
📍 Delivery Outside UK Mainland
International Delivery
We are pleased to offer worldwide delivery on both parcel and pallet orders.
Parcel Shipments
All international parcel deliveries are handled by FedEx International. Shipping times and costs vary depending on destination, parcel size, and service availability.
Pallet Shipments (Including Dangerous Goods)
For palletised orders — including those containing dangerous goods - we work with independent specialist freight companies experienced in compliant global hazardous materials transport.
Due to the nature of these shipments, pricing and transit times are provided on a case‑by‑case basis.
Requesting an International Delivery Quote
If you would like to place an international order, simply get in touch and we will prepare a personalised shipping quote. Please provide the following details:
- Your full name
- Delivery address (including country and any required customs information)
- Details of the items you would like to order
- Quantities for each item
Once we have this information, we’ll handle the rest - from calculating the most suitable shipping method to arranging safe and compliant delivery to your destination.
🛠️ Specialist Products & Pallet Deliveries
Some coatings are made to order, particularly from premium brands like Sigma/PPG. These orders:
-
May have longer lead times
-
May carry a £150 + VAT delivery charge
-
Could require pallet delivery — a separate charge may apply
If your order requires palletisation, we’ll contact you after checkout to confirm delivery costs. You're also welcome to contact us first for a delivery quote before placing the order.
📦 Stock & Availability
We hold a large amount of stock ready for immediate dispatch, but:
-
Some products may need to be ordered in from manufacturers
-
Specialist items may be tinted or made to order, causing additional lead time
-
We’ll always aim to part-deliver where possible to avoid unnecessary delays
If you’re on a strict deadline, please get in touch before ordering so we can advise on delivery timeframes.
🚫 Delivery Liability
While we work hard to ensure your order arrives safely and on time, we use third-party carriers and cannot be held liable for:
-
Delays in transit
-
Lost shipments
-
Goods damaged in delivery
If your order is damaged or delayed, please let us know as soon as possible. We are not always informed automatically by the courier, so your input is essential.
We will work with you to resolve any issues — whether that means replacing items or chasing the carrier.
Note: Address changes after dispatch may incur additional charges, so please double-check your delivery details at checkout.
🧾 Payments & Order Processing
Orders are only processed once full cleared payment has been received.
You will receive email updates at each stage of the process:
-
Pending – order received
-
Processing – being picked, packed or manufactured
-
Dispatched – on the way with the carrier
-
Back order / Part dispatched – if stock is split or delayed
Need Help?
If you're unsure about shipping costs, timelines, or need your order by a specific date, we strongly recommend giving us a quick call before placing your order:
📞 01902 712286
📧 info@andrewscoatings.co.uk
We're here to help make sure you get the right product, in the right place, at the right time.
What is your returns and refund policy?
You may return eligible goods in their original condition within 7 days of delivery. Returns are subject to:
-
Prior approval and a returns reference number
-
A handling charge of 15% to 50%, depending on the product and supplier
-
Goods must be unopened, unused and in saleable condition
-
Original delivery costs are non-refundable
-
Returns are at your own cost - we recommend using a tracked, insured service
To start a return, please email: info@andrewscoatings.co.uk with your order number and reason for return.
Refunds are processed within 3–5 working days once the item is received and inspected.
Please note: Custom-tinted paints, aerosols, or bespoke products are non-returnable unless faulty.
🚚 2. How long does delivery take?
Depending on UK stock, our standard delivery is 1–3 working days for UK mainland addresses. Orders placed before 1pm typically ship same day. If stock is low or delayed, one of our advisors will be in touch.
For larger or palletised orders, allow up to 5 working days.
🎨 3. Can I return custom-tinted paint?
Custom-mixed and tinted paints are made to order and non-returnable, unless there's a fault or we've made an error.
We strongly recommend confirming your colour choice before ordering.
📦 4. What happens if my order arrives damaged?
If your item is damaged in transit, please contact us within 48 hours with photos of the damage and your order number.
We’ll arrange a replacement or refund as appropriate - no hassle.
🧽 5. Do I need to prime before painting?
It depends on the surface and product. Many of our coatings are direct-to-surface but some materials (like new concrete or bare metal) may need a primer.
It will also depend on the surface condition and if you're painting over an existing coating or going direct to surface. Check the Technical Data Sheet (TDS) on each product page, or contact our technical team for advice @ info@andrewscoatings.co.uk or call us on 01902 429190.
💳 6. What payment methods do you accept?
We accept:
-
All major credit/debit cards
-
PayPal
-
Klarna (Buy Now, Pay Later)
-
Google Pay / Apple Pay
🖌️ 7. How do I know which product is right for my project?
We’ve carefully categorised our products so you can easily find the right coating based on surface type, project use, or area of application - like floors, metal, kitchens, or outdoors.
Some products do cross over between categories (for example, a floor paint that also works on metal) but rest assured - we’ve placed them where they’re most commonly used.
Still unsure? Just drop us a message - we’re happy to help you choose the best fit for your specific project.
🌍 8. Do you ship internationally?
Yes we can ship anywhere in the world. For international trade or wholesale orders, please contact: info@andrewscoatings.co.uk
🧾 9. Can I request a VAT invoice?
Yes - VAT invoices are included automatically in your order confirmation email. If you need a re-send, just let us know.
📞 10. How do I contact you?
-
Email: info@andrewscoatings.co.uk
-
Phone: 01902 429190
-
Whatsapp: 07563028307
- Contact form here
