AndCoat Chlorinated Rubber

AndCoat Chlorinated Rubber – Heavy-Duty Chemical Resistant Coating

AndCoat Chlorinated Rubber is a single-pack, heavy-duty protective coating formulated to resist a wide range of chemicals, acids, alkalis, oils, and greases. Suitable for both interior and exterior applications, it provides a tough, flexible finish with excellent weather and UV resistance, making it ideal for use on metal, concrete, and wood surfaces.

With outstanding chemical and moisture resistance, AndCoat Chlorinated Rubber is widely used in industrial maintenance, bund wall protection, water-retaining structures, and line marking for car parks, playgrounds, and loading bays. Its fast-drying formulation ensures efficient application by brush, roller, or spray.

Key Features:

• Single-pack, easy-to-apply chlorinated rubber coating

• Excellent resistance to chemicals, oils, greases, acids, and alkalis

• Suitable for metals, concrete, wood, and other surfaces

• Ideal for bund walls, water-retaining structures, and line marking

• Flexible, durable, and UV-resistant for interior and exterior use

• Available in a wide range of colours

• Fast drying with strong adhesion and flexibility

Surface Preparation

However carefully Chlorinated Rubber paints are applied, maximum protection will only be
achieved if adequate surface preparation is carried out. All surfaces must be completely dry and free from oil, dust or loose material prior to painting. Metal surfaces should be free from rust, scale or corroded deposits for which the most effective procedure is abrasive blasting. If this is not possible, then the whole area should be carefully mechanically or manually prepared. Existing paintwork should be sound, and any gloss removed to provide a key. It is advised to try a patch test to ensure that no lifting or blistering occurs.

Technical Data

• Pack Size: 5L (standard)

• Coverage: Approx. 188 ft of 2” line per litre

• Touch Dry: 30 minutes

• Recoatable: 6 hours (spray) / 24 hours (brush)

• Heat Resistance: Up to 60°C (dry) / 40°C (immersed)

• Application: Brush, roller, or airless spray

• Recommended Primer: Sigma Etch for galvanised surfaces

Directions for Use

The paint must be stirred thoroughly before use. Chlorinated Rubber paints can then be
applied by brush, roller, conventional or airless spray. Add 10% Andcoat Chlorinated
Rubber to Thinner No. 1 for spray application and when priming very porous surfaces such
as render, plaster, brick etc. Two full coats in addition to the primer are normally required
to achieve a full protective system allowing to dry overnight between coats. It is essential
that Chlorinated Rubber is completely dry and free of latent solvents before filling water retaining structures such as ponds, reservoirs, fountains, pools etc. In large aquatic tanks*, washing and flushing is recommended before refilling.

Data Sheets

AndCoat Chlorinated Rubber TDS