Thermoguard Timercoat 30/60 Minute Basecoat
£144.48 (inc. VAT)
£120.40 (ex. VAT)
- Protect your surfaces from fire & smoke
- Structural strength solutions
Thermoguard Timbercoat Intumescent – Fire-Resistant Basecoat for Timber Protection
Thermoguard Timbercoat Intumescent is a specialised intumescent basecoat formulated to deliver 30 or 60 minutes of fire resistance for timber surfaces as part of a certified fire protection system. Designed for use on interior and exterior wood surfaces, this coating expands under heat to form a protective char, effectively insulating and shielding timber from fire damage.
This product must be used as part of a complete system, such as the Thermoguard Timbercoat 60-Minute System or Thermoguard Timbercoat BS Class 1/0 & EN Class B System, and requires a technical specification from the manufacturer prior to application.
Timbercoat Intumescent also provides exceptional adhesion and serves as the first layer for Thermoguard Smoke & Flame Retardant Dualcoat, ensuring optimal colour matching and performance when both coats are used in the same shade.
Key Features:
-
Provides 30 or 60 minutes fire resistance (subject to specification)
-
Suitable for interior and exterior use
-
Exceptional adhesion and durability
-
Used as Part 1 of the Thermoguard Timbercoat system
-
Compatible with Thermoguard Smoke & Flame Retardant Dualcoat topcoat
-
Certificate of Supply available on request
-
Colour supplied as an undercoat shade – match topcoat colour for best results
-
Must be applied according to an approved specification from the Technical Department
Surface Preparation
All surfaces must be clean and dry. Remove all possible surface contaminates such as grease, smoke residues, silicates etc.
Seal water-stain risks with stain blocking sealer suitable to overcoat with water-based acrylic paints.
Abrade hard or smooth surfaces with wetted 120 grit wet-or dry abrasive or dust extracting abrader. Rinse off slurry while still damp. When dry, remove any loose or suspect material back to firm edge.
Fill and repair any damage to the substrate using a good quality remedial filler
Technical Data
Application Conditions
Min 8°C max 30°C.
Conditions Max relative Humidity 75%.
Surface should be at least 3°C above the dew point, free from condensation
Directions for Use
Apply at rate stated on can to protect surfaces & enable project Certification.
Brush & Roller - Woven fabric roller sleeves and synthetic bristle brushes
Spray - Pressure Pot & Gun conventional unit with small compressor: Ensure all traces of
solvent flushed out Thin 5 > 10% with water to spray viscosity. Adjust fluid flow & air flow as normal for acrylic emulsion paint OR Airless Graco 1500, 3500 or equivalent. 3/8” line, 30 mesh filter on machine, no filter in gun. 521 or 523, broad areas 621 or 623 tip
Ensure coverage is applied as per can i.e., 25 sqm can covers 25 sqm
Data Sheets
We aim to deliver your products as quickly, safely and efficiently as possible. Below you'll find a full overview of our delivery process, options, pricing and terms. If you have any questions or a time-sensitive order, our team is always happy to help — just give us a call on 01902 712286.
📦 Standard Delivery
-
Free delivery on all orders over £100 + VAT within UK mainland.
-
For orders under £100 + VAT, a standard shipping fee will apply at checkout.
-
Orders are typically delivered within 2–5 working days after receipt of cleared payment.
We use Parcelforce and FedEx as our main carriers, though this may vary based on location or size of your order.
⚠️ Important Notes on Delivery
-
Orders placed after 12 midday (Monday–Friday) are usually dispatched the next working day.
-
If you require urgent dispatch or Saturday delivery, please call us before placing your order.
-
Do not schedule contractors or start work until goods have arrived and been checked — we cannot be held responsible for project delays due to late or damaged deliveries.
🚚 Next Day & Timed Delivery Options
We offer express shipping for orders needing a quicker turnaround:
| Service | Typical Cost* (Ex. VAT) |
|---|---|
| Next Day Delivery | £10.50 |
| Next Day AM Delivery | £15.00 |
| Specialist Items | £22–£25+ |
*Pricing depends on order contents and size. For mixed/tinted paint or specialist coatings, next-day delivery may cost more due to courier restrictions.
Please contact us if your order is time-sensitive — we’ll confirm what options are available based on your products and location.
📍 Delivery Outside UK Mainland
International Delivery
We are pleased to offer worldwide delivery on both parcel and pallet orders.
Parcel Shipments
All international parcel deliveries are handled by FedEx International. Shipping times and costs vary depending on destination, parcel size, and service availability.
Pallet Shipments (Including Dangerous Goods)
For palletised orders — including those containing dangerous goods - we work with independent specialist freight companies experienced in compliant global hazardous materials transport.
Due to the nature of these shipments, pricing and transit times are provided on a case‑by‑case basis.
Requesting an International Delivery Quote
If you would like to place an international order, simply get in touch and we will prepare a personalised shipping quote. Please provide the following details:
- Your full name
- Delivery address (including country and any required customs information)
- Details of the items you would like to order
- Quantities for each item
Once we have this information, we’ll handle the rest - from calculating the most suitable shipping method to arranging safe and compliant delivery to your destination.
🛠️ Specialist Products & Pallet Deliveries
Some coatings are made to order, particularly from premium brands like Sigma/PPG. These orders:
-
May have longer lead times
-
May carry a £150 + VAT delivery charge
-
Could require pallet delivery — a separate charge may apply
If your order requires palletisation, we’ll contact you after checkout to confirm delivery costs. You're also welcome to contact us first for a delivery quote before placing the order.
📦 Stock & Availability
We hold a large amount of stock ready for immediate dispatch, but:
-
Some products may need to be ordered in from manufacturers
-
Specialist items may be tinted or made to order, causing additional lead time
-
We’ll always aim to part-deliver where possible to avoid unnecessary delays
If you’re on a strict deadline, please get in touch before ordering so we can advise on delivery timeframes.
🚫 Delivery Liability
While we work hard to ensure your order arrives safely and on time, we use third-party carriers and cannot be held liable for:
-
Delays in transit
-
Lost shipments
-
Goods damaged in delivery
If your order is damaged or delayed, please let us know as soon as possible. We are not always informed automatically by the courier, so your input is essential.
We will work with you to resolve any issues — whether that means replacing items or chasing the carrier.
Note: Address changes after dispatch may incur additional charges, so please double-check your delivery details at checkout.
🧾 Payments & Order Processing
Orders are only processed once full cleared payment has been received.
You will receive email updates at each stage of the process:
-
Pending – order received
-
Processing – being picked, packed or manufactured
-
Dispatched – on the way with the carrier
-
Back order / Part dispatched – if stock is split or delayed
Need Help?
If you're unsure about shipping costs, timelines, or need your order by a specific date, we strongly recommend giving us a quick call before placing your order:
📞 01902 712286
📧 info@andrewscoatings.co.uk
We're here to help make sure you get the right product, in the right place, at the right time.
