Teamac Antifouling D Plus
£129.54 (inc. VAT)
£107.95 (ex. VAT)
- UK manufactured, trusted brands
Teamac Antifouling D Plus is a high-performance antifouling coating designed to prevent marine growth on the submerged areas of boats and underwater structures. Formulated with a high level of cuprous oxide, this advanced composition delivers reliable protection for up to 24 months.
Suited for vessels operating at speeds up to 30 knots, it is ideal for both domestic and commercial use on hulls made from steel, wood or GRP. Always use in conjunction with Teamac Metaclor Antifouling Primer for best results.
⚠️ Not suitable for aluminium hulls.
✅ Long-lasting antifouling – 18 to 24 month protection
✅ Designed for vessels up to 30 knots
✅ Effective on steel, wood and GRP hulls
✅ Semi-gloss finish with excellent underwater durability
✅ Available in a wide range of colours
✅ HSE Approved: No. 7218
Surface Preparation
-
Do not use on aluminium
-
New steel: Abrasive blast to SA 2½ and apply 2–3 coats of Teamac Metaclor Primer
-
GRP: Lightly abrade surface and prime with 2 coats of Metaclor Primer
-
Wood: Ensure dry and clean, then apply 2–3 coats of Metaclor
-
Maintenance: Remove marine growth, pressure wash, abrade and spot-prime any breakdown
-
Apply 2 full coats of D Plus over primed surface
-
Minimum overcoat time: 16 hours
-
Launch within 3 months (if shrouded from direct sunlight)
Tech Data
| Property | Detail |
|---|---|
| Type | Cuprous oxide antifouling coating |
| Finish | Semi-gloss |
| Colours | Black, Blue, Red, Grey, Green |
| Pack Sizes | 1L, 2.5L, 5L |
| Coverage | 10 m² per litre @ 60μm DFT |
| Volume Solids | 57–60% |
| WFT / DFT | 100μm / 60μm |
| Touch Dry | 3 hours @ 20°C |
| Hard Dry | 18 hours @ 20°C |
| Minimum Recoat Time | 16 hours |
| VOC Content | 280–320 g/L |
| Flash Point | 38°C |
| Application Methods | Brush or roller (spray restricted to professionals) |
| Thinner / Cleaner | Teamac Thinners 17 (max 5%) |
Directions for Use
-
Stir thoroughly before use
-
Apply by brush or roller (spray by professionals only)
-
Avoid painting below 5°C or in high humidity
-
Always use over 2–3 coats of Teamac Metaclor Underwater Primer
-
Apply two full coats of Antifouling D Plus for optimal protection
-
Launch boat no sooner than 8 hours after final coat and no later than 3 months
Data Sheets
Use collapsible tabs for more detailed information that will help customers make a purchasing decision.
Ex: Shipping and return policies, size guides, and other common questions.