Zinsser Write On Paint Kit

Zinsser Write-On Paint® is a two-pack white coating that transforms interior walls into fully functional dry wipe surfaces. Designed for professional environments, it’s ideal for turning ordinary plasterboard, wood, cement or metal walls into creative spaces for brainstorming, teaching or planning.

Perfect for schools, offices and universities, this kit provides everything you need for a single-coat application that covers up to 30m². Once cured, it’s tough, durable and compatible with most standard dry wipe markers and cleaners – making it a long-lasting alternative to traditional whiteboards.

Key Benefits

✅ Turns walls into a dry-erase surface – Ideal for collaboration and creativity
✅ One-coat application – Simple mix-and-apply system for fast results
✅ Stain-resistant – Wipes clean without ghosting or residue
✅ Durable & long-lasting – Designed for frequent use in high-traffic areas
✅ Versatile – Suitable for plaster, wood, metal and previously painted surfaces

Surface Preparation

• Ensure surfaces are clean, sound, dry and free from dust, grease and contaminants.

• Glossy surfaces should be lightly abraded to improve adhesion.

• For new or matt surfaces, first prime with a white, water-based primer such as Zinsser Bulls Eye 1-2-3.

• For best results, apply over vinyl, silk or acrylic eggshell topcoats.

• Fill and sand cracks or imperfections before painting.

Technical Data

• Type: 2-pack system (base coat + activator)

• Finish: White, dry wipe surface

• Coverage: Up to 30m² per kit (single coat)

• Pack Size: 2L base coat + 500ml activator

• Drying Time: Touch dry in 4 hours

• Full Cure: 5 days before write-on use

• Recoatable: One coat only required

• Application Method: Roller (microfibre roller included)

• Environment: Interior only

• Durability: Tough, long-lasting and resistant to repeated cleaning

• Compatibility: Suitable with most dry wipe markers (test recommended)

Directions for Use

1. Mix base coat and activator thoroughly before application.

2. Stir continuously to ensure even blending of the two components.

3. Apply one even coat using the supplied microfibre roller.

4. Maintain a wet edge and work systematically to avoid streaking.

5. Allow 4 hours to dry, then leave for 5 days before writing on the surface.

6. Use only standard dry wipe markers and cleaners (test compatibility first).

7. Clean tools immediately with warm, soapy water.

8. Store between 5°C and 25°C. Protect from frost.

Data Sheets

Write-on Kit TDS

Write-on Kit Base MSDS

Write-on Kit Activator MSDS