Zinsser Ceiling Pro 5 in 1
£51.00 (inc. VAT)
£42.50 (ex. VAT)
- Free worldwide shipping
- In stock, ready to ship
- Backordered, shipping soon
Zinsser Ceiling Pro 5-in-1 is a specialist ceiling paint that combines five essential decorating steps in one advanced formula: it seals, primes, blocks stains, bridges hairline cracks and delivers a non-yellowing matt white finish.
Designed with modern cationic water-based technology, Ceiling Pro 5-in-1 adheres to any surface, tackles common ceiling problems like water and smoke stains, and resists fungal degradation with an integrated surface biocide. It's low odour, fast drying and contains only trace VOCs – making it ideal for both domestic and commercial interiors.
With a recoat time of just 45 minutes and exceptional coverage, it's the go-to choice for decorators looking for speed, convenience and professional results in one product.
Surface Preparation
-
Ensure ceilings are clean, dry and free from dust, grease or contaminants
-
Remove any existing mould, mildew or flaking coatings
-
Moisture content of the surface should be below 15%
-
Countersink and fill any exposed nail heads before painting
-
For best results, avoid application in rooms colder than 10°C or hotter than 30°C
Technical Data
Type: Water-based 5-in-1 ceiling finish (seal, prime, stain block, finish & crack-bridging)
Finish: Matt (non-yellowing)
Colour: White
Sizes Available: 2.5L
Coverage: 10m² per litre per coat
Coats Required: 1–2 (depending on surface condition or stain severity)
Touch Dry: 25–30 minutes
Recoatable: 45 minutes
Full Cure: 4 hours
Film Thickness: 40 microns per coat
VOC: <5 g/L (ultra-low)
Biocide Content: Contains 0.008% 4,5-dichloro-2-n-octyl-4-isothiazolin-3-one (protects the dried film)
Application Methods: Brush, roller or airless sprayer (tip size 0.015–0.019", 2000–2500 PSI)
Thinner/Cleaner: Water (thin up to 5% for spray only)
Storage: Indoors, 5–25°C, protect from frost
Shelf Life: 2 years (unopened)
Directions for Use
-
Stir thoroughly before use
-
Apply using a brush, roller or airless spray – no thinning required unless spraying
-
For spray application, thin with up to 5% clean water if needed
-
Ensure good ventilation during application and drying
-
Allow 45 minutes before recoating
-
Clean tools immediately with water
-
Do not mix with conventional emulsion paints – use clean tools only
Data Sheets
Use collapsible tabs for more detailed information that will help customers make a purchasing decision.
Ex: Shipping and return policies, size guides, and other common questions.
