Teamac Suregrip Deck Paint
£72.00 (inc. VAT)
£60.00 (ex. VAT)
- Free worldwide shipping
- In stock, ready to ship
- Backordered, shipping soon
Teamac Suregrip® is a ready-to-use, pre-aggregated non-slip deck coating designed to create a durable, textured surface that enhances safety underfoot.
Formulated for use on boat decks, pontoons, walkways and marine platforms, Suregrip® delivers a waterproof, UV-stable and salt-resistant finish that stands up to the harshest marine environments while maintaining colour and appearance.
Suitable for both interior and exterior applications, it adheres well to a wide range of properly prepared substrates including wood, metal, concrete and GRP (glass reinforced plastic).
Available in a range of practical colours - Red, White, Black, Grey, Blue, Green, Yellow and Light Grey - this coating combines performance and safety without compromising on finish.
-
Slip-resistant textured surface for decks and walkways
-
Waterproof & weather-resistant for marine environments
-
Excellent adhesion on multiple substrates
-
Long-lasting UV protection to prevent fading
-
Available Sizes: 2.5 L & 5 L
Surface Preparation
Ensure all surfaces are clean, dry, sound and free from contaminants such as grease, oil, loose material or previous flaking coatings.
Bare Steel: Degrease and abrade to remove rust and scale. Apply a suitable Teamac marine primer before Suregrip®.
Wood: Sand smooth, remove dust and ensure the surface is dry. Prime with an appropriate wood primer if required.
Concrete: Allow new concrete to cure fully, then clean and lightly abrade to provide a key.
GRP & Existing Paint: Lightly abrade and clean to provide a sound key for adhesion. Remove any loose coatings or polish residues
Directions for Use
Stir thoroughly before and during application to ensure even distribution of aggregate.
Apply by brush or roller in even coats.
Do not thin, as this will reduce texture and slip resistance.
Allow the first coat to dry fully before applying a second coat for maximum durability.
Avoid application in cold or damp conditions. Ensure adequate ventilation and suitable temperatures (minimum 10 °C).
Touch dry in around 6 hours; allow 16 hours minimum between coats (times may vary with conditions).
Clean tools with Teamac Thinners 14 immediately after use
Technical Data Summary
| Property | Detail |
|---|---|
| Type | Pre-aggregated, chlorinated rubber-based non-slip coating |
| Finish | Textured / Matt |
| Colour Range | Red, White, Black, Grey, Blue, Green, Yellow, Light Grey |
| Recommended Film Thickness | 100 µm WFT / 40 µm DFT |
| Theoretical Coverage | ~ 10 m² per litre (depending on texture and surface) |
| Drying Time | Touch Dry 6 hrs @ 20 °C / Recoat 16 hrs |
| Application Methods | Brush / Roller |
| Pack Sizes | 1 L / 2.5 L / 5 L |
| Thinner / Cleaner | Teamac Thinners 14 |
Data Sheets
Use collapsible tabs for more detailed information that will help customers make a purchasing decision.
Ex: Shipping and return policies, size guides, and other common questions.
