Blackfriar PU Floor Paint

Blackfriar PU Floor Paint – Durable, Oil-Resistant Floor Coating

Blackfriar PU Floor Paint protects and transforms floors with an attractive, hard-wearing finish. Suitable for a wide range of surfaces including wood, concrete, cement, metal, and brickwork, this solvent-based coating is specially formulated to resist oil and grease, making it ideal for foot and light traffic areas. Available in standard colours and the full RAL, NCS, and BS4800 colour ranges (on request).

Key Features:

• Hard-wearing, durable finish for long-lasting protection

• Ideal for foot and light traffic areas

• Suitable for wood, concrete, cement, metal, and brickwork

• Can be applied to previously painted surfaces

• Resistant to oil and grease

• For both indoor and outdoor use

• Solvent-based formulation

• Gloss Finish

Application Information:

• Coverage: 12–14 m²/L per coat

• Recoatable: After 16 hours at 20°C

Surface Preparation

Ensure the surface to be painted is sound, clean, dry and free from grease or any substance liable to give adhesion problems. Scrape off any old or flaking paint until you have a firm surface. Special attention should be given to areas under cars to ensure all oil, grease, dirt and road salt is removed. New concrete must be left for at least 6 months
before applying Blackfriar Professional Polyurethane Floor Paint.

Technical Data

• Durable polyurethane finish.
• Prevents the dusting of concrete floors.
• Apply on brickwork, concrete, cement, wood, metal and stone.
• Resistant to grease, oil and weak solutions of acid and alkali.
• Can be applied to previously painted surfaces.
• Indoor and outdoor use.
• Brush or roller application

Coverage Rate- 12-14m2/litre per coat. Two coats recommended.

Drying Time
4-6hrs @20°C. Allow to dry for a minimum of 16hrs @20°C
between coats. Allow to dry for a minimum of 48hrs @20°C
before subjecting to heavy traffic. Full cure is achieved in 5-
7 days @20°C.

Directions for Use

Stir thoroughly before use. Apply with a brush or roller working the paint in any surface imperfections. On bare or new surfaces first apply Blackfriar Professional Solvent Based Floor Sealer followed by 1-2 coats of Blackfriar Professional Polyurethane Floor Paint. On previously painted surfaces apply 1-2 coats as required. Blackfriar Professional Polyurethane Floor Paint is not suitable for use over PVC, thermoplastic tiles, quarry tiles, asphalt floors or granolithic concrete. Do not apply it on concrete surfaces treated with alkali containing liquids, areas subjected to rising damp or areas treated with PVA bonding solutions. If concrete floors are very smooth then pre-treat with Blackfriar Professional Acid Etch followed by Blackfriar Solvent Based Floor Sealer prior to applying 1-2 coats of
Blackfriar Professional Polyurethane Floor Paint. Surfaces are slippery when wet. To ensure slip resistance the floor must be kept dry when in use. The use of protective mats
will help preserve the surface under tyres.

Data Sheets

Blackfriar PU Floor Paint TDS

Blackfriar PU Floor Paint MSDS