Watco Protecta-Coat
Litres required: 0.00L
Based on 12.0 m² per litre- Lightwork of heavy-duty repairs
- Structural strength solutions
Watco Protecta-Coat is a clear polyaspartic floor coating for protecting suitably prepared concrete and existing floor finishes against wear. Its tough, glossy finish helps preserve coloured and decorative coatings while providing an easier-to-clean surface in warehouses, showrooms and other working areas.
The two part formulation can be used indoors and outdoors and is suitable for cold-weather projects when applied to a dry, correctly prepared substrate. Its resistance to UV and weathering makes it useful where a clear finish needs to retain its appearance outside. Application is deliberately thin: spreading the mixed material over the correct measured area is important for both coverage and curing.
- Clear, hard wearing polyaspartic protective coating.
- Suitable for compatible existing paint after preparation and a trial.
- Low-temperature application down to -10°C.
Surface Preparation
Diamond grind existing painted surfaces to a consistently rough profile and remove all weakly bonded material. Sweep and vacuum thoroughly. Degrease where required, rinse completely and allow to dry. Allow new concrete about eight weeks to dry. Porous or high-suction surfaces can require Watco Polyaspartic Primer. Power floated concrete needs a specified preparation and priming system rather than direct coating.
Technical Data
| Pack size / finish | 2.5L / Clear glossy finish |
|---|---|
| Composition | Two part polyaspartic resin |
| Use | Interior and exterior |
| Application / mixing range | -10°C to 30°C / mix at 10–25°C |
| Pot life | Approximately 20 minutes at 20°C |
| Shelf life | 12 months unopened |
Coverage
Approximately 30m² per 2.5L on a non-porous prepared surface (12m²/L). Textured or porous substrates and temperatures below 0°C can reduce coverage. One thin coat is normally specified.
Directions for Use
- Condition the product at 15–25°C for at least eight hours, then stir each component separately.
- Combine the full pack and mix thoroughly with a wide bladed tool, scraping the base and sides. Do not dilute or mix more than one pack at a time.
- Empty into a shallow tray and apply promptly with a short pile roller, working the coating into a thin film over the measured area.
- For planning, the linked technical sheet gives six hours before recoating, eight hours before light traffic and sixteen hours before heavy traffic at 20°C. Allow seven days for full chemical resistance.
Limitations
Do not apply to damp, icy or wet surfaces, or when rain is imminent. The smooth finish can become slippery outdoors; select Protecta-Coat Anti Slip where grip is needed. Test compatibility with existing coatings. Do not apply heavily or use on unprepared power floated concrete. Most self-levelling compounds require specific advice. Cure times extend markedly in cold conditions; follow the technical sheet for the actual temperature.
Product FAQs
Can it protect an existing coloured floor?
Yes, if the coating is compatible, sound and thoroughly prepared. Test a small area first and remove weakly bonded paint.
Can I use it outside?
Yes, on a suitable dry substrate. Avoid imminent rain and consider the Anti Slip version where a smooth finish could become slippery.
Is a primer required?
Porous or high-suction concrete generally needs Polyaspartic Primer. Power floated floors need a specified preparation and primer system.
How thickly should it be applied?
As a thin film over approximately 30m² per 2.5L. Applying heavily reduces coverage and can cause curing problems.
Data Sheets
We aim to deliver your products as quickly, safely and efficiently as possible. Below you'll find a full overview of our delivery process, options, pricing and terms. If you have any questions or a time-sensitive order, our team is always happy to help — just give us a call on 01902 712286.
📦 Standard Delivery
-
Free delivery on all orders over £100 + VAT within UK mainland.
-
For orders under £100 + VAT, a standard shipping fee will apply at checkout.
-
Orders are typically delivered within 2–5 working days after receipt of cleared payment.
We use Parcelforce and FedEx as our main carriers, though this may vary based on location or size of your order.
⚠️ Important Notes on Delivery
-
Orders placed after 12 midday (Monday–Friday) are usually dispatched the next working day.
-
If you require urgent dispatch or Saturday delivery, please call us before placing your order.
-
Do not schedule contractors or start work until goods have arrived and been checked — we cannot be held responsible for project delays due to late or damaged deliveries.
🚚 Next Day & Timed Delivery Options
We offer express shipping for orders needing a quicker turnaround:
| Service | Typical Cost* (Ex. VAT) |
|---|---|
| Next Day Delivery | £10.50 |
| Next Day AM Delivery | £15.00 |
| Specialist Items | £22–£25+ |
*Pricing depends on order contents and size. For mixed/tinted paint or specialist coatings, next-day delivery may cost more due to courier restrictions.
Please contact us if your order is time-sensitive — we’ll confirm what options are available based on your products and location.
📍 Delivery Outside UK Mainland
International Delivery
We are pleased to offer worldwide delivery on both parcel and pallet orders.
Parcel Shipments
All international parcel deliveries are handled by FedEx International. Shipping times and costs vary depending on destination, parcel size, and service availability.
Pallet Shipments (Including Dangerous Goods)
For palletised orders — including those containing dangerous goods - we work with independent specialist freight companies experienced in compliant global hazardous materials transport.
Due to the nature of these shipments, pricing and transit times are provided on a case‑by‑case basis.
Requesting an International Delivery Quote
If you would like to place an international order, simply get in touch and we will prepare a personalised shipping quote. Please provide the following details:
- Your full name
- Delivery address (including country and any required customs information)
- Details of the items you would like to order
- Quantities for each item
Once we have this information, we’ll handle the rest - from calculating the most suitable shipping method to arranging safe and compliant delivery to your destination.
🛠️ Specialist Products & Pallet Deliveries
Some coatings are made to order, particularly from premium brands like Sigma/PPG. These orders:
-
May have longer lead times
-
May carry a £150 + VAT delivery charge
-
Could require pallet delivery — a separate charge may apply
If your order requires palletisation, we’ll contact you after checkout to confirm delivery costs. You're also welcome to contact us first for a delivery quote before placing the order.
📦 Stock & Availability
We hold a large amount of stock ready for immediate dispatch, but:
-
Some products may need to be ordered in from manufacturers
-
Specialist items may be tinted or made to order, causing additional lead time
-
We’ll always aim to part-deliver where possible to avoid unnecessary delays
If you’re on a strict deadline, please get in touch before ordering so we can advise on delivery timeframes.
🚫 Delivery Liability
While we work hard to ensure your order arrives safely and on time, we use third-party carriers and cannot be held liable for:
-
Delays in transit
-
Lost shipments
-
Goods damaged in delivery
If your order is damaged or delayed, please let us know as soon as possible. We are not always informed automatically by the courier, so your input is essential.
We will work with you to resolve any issues — whether that means replacing items or chasing the carrier.
Note: Address changes after dispatch may incur additional charges, so please double-check your delivery details at checkout.
🧾 Payments & Order Processing
Orders are only processed once full cleared payment has been received.
You will receive email updates at each stage of the process:
-
Pending – order received
-
Processing – being picked, packed or manufactured
-
Dispatched – on the way with the carrier
-
Back order / Part dispatched – if stock is split or delayed
Need Help?
If you're unsure about shipping costs, timelines, or need your order by a specific date, we strongly recommend giving us a quick call before placing your order:
📞 01902 712286
📧 info@andrewscoatings.co.uk
We're here to help make sure you get the right product, in the right place, at the right time.
