Blackfriar Acrylic Floor Paint

Blackfriar Acrylic Floor Paint – Tough, Low-Odour Floor Coating

Blackfriar Acrylic Floor Paint protects and transforms floors with a tough, durable, and hard-wearing finish. Ideal for light traffic areas on surfaces such as wood, concrete, asphalt, and tarmac, it’s easy to apply and provides long-lasting protection. Available in the full RAL, NCS, and BS4800 colour ranges (5L tins on request) as well as standard colours.

Key Features:

• Tough and durable finish for light traffic areas

• Low odour – perfect for sensitive environments

• Suitable for previously painted surfaces

• Quick-drying, water-based formulation

• For both indoor and outdoor use

• Semi-Gloss Finish

Application Information:

• Coverage: 10–12 m²/L per coat

• Hard Dry: 4–6 hours at 20°C

Surface Preparation

Ensure the surface to be painted is sound, clean, dry and free from grease or any substance liable to give adhesion problems. Scrape off any old or flaking paint until you have a firm surface. Special attention should be given to areas under cars to ensure all oil, grease, dirt and road salt is removed. New concrete must be left for at least 6 months
before applying Blackfriar Professional Acrylic Floor Paint.

Technical Data

• Indoor and outdoor use.
• Water Based - low odour.
• Suitable for asphalt, Tarmac, brickwork, concrete, cement, wood, metal and stone.
• Resistant to grease, oil and weak solutions of acid and alkali.
• Can be applied to previously painted surfaces.
• Brush or roller application.
• Ideal for domestic, commercial and light industrial use

Coverage Rate - 10-12m2/litre per coat. Two coats recommended.

Drying Time
4-6hrs @20°C. Allow to dry for a minimum of 6hrs @20°C between coats. Full cure is achieved in 3-5 days @20°C.

Directions for Use

Stir thoroughly before use. Apply with a brush or roller working the paint in any surface imperfections. On bare or new surfaces first apply Blackfriar Professional Water Based Floor Sealer followed by 1-2 coats of Blackfriar Professional Acrylic Floor Paint. On previously painted surfaces apply 1-2 coats as required. Blackfriar Professional Acrylic Floor Paint is not suitable for use over PVC, thermoplastic tiles, quarry tiles or granolithic
concrete. Do not apply it on concrete surfaces treated with alkali containing liquids, areas subjected to rising damp or areas treated with PVA bonding solutions. Do not apply in
cold (below 10°C), damp or humid conditions. If concrete floors have no profile then pre-treat with Blackfriar Professional Acid etch to provide a mechanical key, followed after thorough rinsing by Blackfriar Professional Water Based Floor Sealer prior to applying 1-2 coats of Blackfriar Professional Acrylic Floor Paint.

Data Sheets

Blackfriar Acrylic Floor Paint TDS

Blackfriar Acrylic Floor Paint MSDS