Blackfriar High Traffic Floor Paint

Blackfriar High Traffic Floor Paint – Durable, Easy-to-Clean 2-Pack Coating

Blackfriar High Traffic Floor Paint is an exceptionally hard-wearing, high-performance 2-pack floor coating designed for indoor and outdoor high-traffic areas. It provides a tough, easy-to-clean surface that resists grease, oil, and solutions of acid and alkali, making it ideal for industrial, commercial, and workshop floors.

Key Features:

• Exceptional durability for heavy foot and vehicular traffic

• Resists grease, oil, acid, and alkali solutions

• Rapid drying reduces disruption – floors can be used by vehicles after 3 days

• Suitable for concrete, metal, brickwork, and stone

• Indoor and outdoor use

• Solvent-based formulation

• Available in red, grey, and tintable bases (contact us)

• Semi-Gloss Finish

Application Information:

• Coverage: 12 m²/L per coat

• Hard Dry: 8 hours at 20°C

• Recoatable: 8–48 hours

Surface Preparation

Ensure the surface to be painted is sound, clean, dry and free from grease or any substance liable to give adhesion problems. Scrape off any old or flaking paint until you have a firm surface. Special attention should be given to areas under cars to ensure all oil, grease, dirt and road salt is removed. Prepared surfaces with residual oil contamination should be primed with Blackfriar Professional Oil Tolerant Primer. New concrete must be left for at least 6 months before applying Blackfriar Professional High Traffic Floor Paint. Power-floated floors should either be blast tracked or treated with Blackfriar Professional Acid Etch followed by thorough rinsing. New or exposed bare concrete should be primed with Blackfriar Professional Water Based Epoxy Floor Primer.

Technical Data

• A high performance solvent based polyurethane acrylic.
• Resists grease, oil and solutions of acid and alkali.
• Ideal for indoor and outdoor high traffic areas.
• Minimises disruption due to rapid drying time – vehicular traffic can use after just 3 days.
• Brush or roller application.
• Can be applied over concrete, metal, brickwork and stone.
• Bases can be tinted to RAL and BS colours (contact us)

Coverage - 12m2 / litre per coat. Two coats recommended.

Drying time - Touch dry - 2 hours (20oC). Overcoating time - min 8 hours, max 2 days. Allow to dry overnight for foot traffic or 3 days before vehicular traffic.

Directions for Use

Base and activator supplied in correct proportions. Add all activator to base container and mix thoroughly for at least 5 minutes until product is smooth and even. Allow to rest 5 minutes before using. DO NOT MIX PART UNITS. Badly activatedor incorrectly mixed materials will affect performance and may cause early failure or discolouration.
The mixed material has a usable pot life of 6 hours (20oC).

Apply with a good quality medium pile roller -smaller areas may be brushed.

Data Sheets

Blackfriar High Traffic Floor Paint TDS

Blackfriar High Traffic Floor Paint Part A MSDS

Blackfriar High Traffic Floor Paint Part B MSDS