Rust-Oleum Metal Cladding Primer
£225.42 (inc. VAT)
£187.85 (ex. VAT)
- Free worldwide shipping
- In stock, ready to ship
- Backordered, shipping soon
Rust-Oleum Metal Cladding Primer – Fast-Drying Anti-Corrosion Primer for Metal Surfaces
Rust-Oleum Metal Cladding Primer is a single-pack, water-based anti-corrosion primer designed for use on a variety of sound metal substrates, including bare or blasted steel, galvanized metal, and plastisol. With low VOC content and excellent flow-out, it offers quick drying—ready for overcoating in just 1 hour. Available in three colour options to enhance the opacity and coverage of topcoats, it’s ideal for both new projects and maintenance work.
Key Features:
-
Single-Pack Anti-Corrosion Protection – No mixing required
-
Fast Drying – Overcoat in as little as 1 hour
-
Water-Based & Low VOC – Safer and more environmentally friendly
-
Versatile Surface Compatibility – For steel, galvanized metal, and plastisol®
-
Available in 3 Colours – Improves opacity and topcoat performance
-
Excellent Flow-Out – Smooth, even application
Application Details:
-
Surface Types: Bare/blasted steel, galvanized metal, plastisol®
-
Dry to Overcoat: 1 hour
-
Formulation: Water-based, single-pack primer
-
Colours Available: 3 colour options for optimal topcoat coverage
Surface Preparation
Remove grease, oil and all other surface contaminations by alkaline or high pressure
(steam) cleaning in combination with appropriate detergents. For optimum results remove
rust, rust scale, mill scale and deteriorated coatings by abrasive blasting to Sa 2½ (ISO
8501-1: 1988), blast profile max. 50 µm. If blasting is not possible remove loose rust and
loose coatings by scraping and/or wire brushing to St 3 (ISO 8501-1: 1988). Zinc or
aluminium corrosion products can be removed with Surfa-Etch 108 Etching Solution
followed by rinsing with plenty of fresh water, or by brush-off blasting. Remove
deteriorated coatings by scraping and wire brushing. Sand intact coatings to roughen the
surface slightly. The surface must be clean and may be slightly damp during application.
Technical Data
Density (g/cm³): 1,29
Gloss Level: Matt
Solids content in volume: 43,7%
Heat Resistance: 80°C (dry heat)
Directions for Use
To ensure homogeneity, coating materials should be thoroughly stirred prior to use.
Temperature of air, substrate and coating material between 10 and 35°C and relative
humidity below 85%. The substrate temperature must be at least 5°C above dew point.
Data Sheets
Use collapsible tabs for more detailed information that will help customers make a purchasing decision.
Ex: Shipping and return policies, size guides, and other common questions.
