Rust-Oleum 5220 Clear Concrete Sealer

Rust-Oleum EpoxyShield Sealer – Clear, Easy-to-Apply Concrete Sealer

Rust-Oleum EpoxyShield® Sealer is a single-pack, water-based concrete sealer designed to reduce dust, protect surfaces, and simplify cleaning. With a non-yellowing clear gloss finish, it enhances the appearance of concrete while providing long-lasting protection.

Touch dry in just 1 hour, this easy-to-apply sealer is the perfect primer for EpoxyShield® ULTRA coatings, ensuring improved adhesion and durability. Suitable for garages, workshops, and other concrete floors.

Key Features:

• Single-Pack Formula – Simple and convenient application

• Non-Yellowing Clear Gloss – Long-lasting finish and protection

• Fast Drying – Touch dry in only 1 hour

• Reduces Dust & Simplifies Cleaning – Cleaner, safer surfaces

• Perfect Primer – Ideal base for EpoxyShield® ULTRA coatings

Surface Preparation

Remove oil, grease and all other contaminants with EpoxyShield® Cleaner/Degreaser 2901
in combination with high pressure cleaning. Allow new concrete to set for at least 30 days
before applying a coating. Remove laitance, loose and damaged concrete by sandblasting
or etching with RUSTOLEUM Surfa-Etch 108. Repair all holes and cracks with
EpoxyShield® concrete repair products. Always pre-treat absorbent, porous surfaces with
EpoxyShield® Sealer 5220. Roughen or blast well-sealed and smooth concrete and treat
with Epoxyshield® Sealer 5220 or apply a coat RUST-OLEUM 3333 Super Adhesive.
Roughen still-intact floor coatings to ensure good adherence. Remove poorly adhering old
coatings with wire brush and sandpaper. During application the surface must be clean and
dry.

Technical Data

Density (g/cm³): 1,16 - 1,21
Gloss Level: Satin
Solids Content in weight: 48-52%
Solids content in volume: 38% - 42%

Directions for Use

To ensure homogeneity, coating materials should be thoroughly stirred prior to use.

Data Sheets

Rust-Oleum 5220 Clear Concrete Sealer TDS

Rust-Oleum 5220 Clear Concrete Sealer MSDS