Watco Bund Sealer
Litres required: 0.00L
Based on 3.5 m² per litre- Lightwork of heavy-duty repairs
- Structural strength solutions
Watco Bund Sealer is a glass-flake reinforced epoxy coating for sealing suitable containment areas, concrete and small areas of metal. Its high-solids, two part formulation creates a thick, glossy protective film with resistance to a wide range of chemicals, making it useful around tanks, pipes and bund walls and floors.
A continuous coating is essential in a containment area. Bund Sealer is normally applied in one full coat, with additional material where a rough or porous surface needs it. Minor cracks and floor-to-wall junctions can be reinforced using the specified fibreglass tape detail. Choose Black or Light Grey, and check the technical sheet's chemical-resistance information against the substances, concentrations and exposure conditions involved.
- Glass-flake reinforced epoxy for chemical-resistant protection.
- For suitable interior and exterior containment surfaces.
- One full coat normally provides the specified film.
Surface Preparation
The surface must be sound, clean and free of dust, oil and loose material. Remove contamination with a cleaner suited to the substrate and rinse as directed. Abrade sound retained paint and remove weak or defective coatings. New concrete normally needs eight weeks to dry. Repair larger cracks before coating; use the specified fibreglass tape detail at suitable minor cracks and junctions.
Technical Data
| Pack size / colours | 4L / Black and Light Grey |
|---|---|
| Composition | Two part, glass-reinforced epoxy |
| Coverage film thickness | 300 microns |
| Minimum conditions | Air 10°C; substrate 5°C; best results from 15°C |
| Pot life | 25 minutes at 20°C |
| Shelf life | 24 months unopened |
Coverage
Approximately 14m² per 4L (3.5m²/L). Do not exceed this spread rate. Rough, porous or open-textured surfaces may need another coat to create a complete, continuous film.
Directions for Use
- Stir each component separately, combine the full pack and mix thoroughly with a wide bladed tool, scraping the sides and base. Do not thin or part mix.
- Transfer the mixed coating promptly into a suitable tray or bucket and use immediately; epoxy left in the mixing tin generates heat.
- Apply a full coat with a brush or roller, working it into the substrate. Reinforce specified details and inspect for incomplete coverage.
- At 20°C, the technical sheet gives twelve hours for light traffic, twenty-four hours for heavy traffic and seven days for full chemical resistance. Do not wash or leave water standing on the surface for at least seven days.
Limitations
Do not apply to wet surfaces or areas subject to rising damp. The technical sheet excludes locations with structural movement or vibration. Check the complete chemical-resistance schedule rather than assuming resistance to every chemical. Light Grey can discolour under UV without necessarily losing durability. Condition material at 15–25°C before use and protect from freezing.
Product FAQs
Will one coat be enough?
Usually, at the specified 14m² per 4L rate. Rough or very porous surfaces may need another coat to form a continuous film.
Can it bridge cracks at a bund wall?
Suitable minor cracks and junctions can use the specified fibreglass reinforcing tape detail. Larger cracks need repair before coating.
When can chemicals contact the coating?
At 20°C, allow seven days for full chemical resistance. Lower temperatures can extend this; follow the technical sheet.
Is it resistant to every chemical?
No universal assumption should be made. Check the manufacturer's resistance information for the actual chemical, concentration and contact conditions.
Data Sheets
Safety Data Sheet - Curing Agent (GB)
We aim to deliver your products as quickly, safely and efficiently as possible. Below you'll find a full overview of our delivery process, options, pricing and terms. If you have any questions or a time-sensitive order, our team is always happy to help — just give us a call on 01902 712286.
📦 Standard Delivery
-
Free delivery on eligible orders of £150 ex VAT or more within UK mainland.
-
For eligible orders below £150 ex VAT, standard delivery is £8.75 + VAT. Products with their own delivery rates are excluded; the applicable charge is shown at checkout.
-
Orders are typically delivered within 2–5 working days after receipt of cleared payment.
We use Parcelforce and FedEx as our main carriers, though this may vary based on location or size of your order.
⚠️ Important Notes on Delivery
-
Orders placed after 12 midday (Monday–Friday) are usually dispatched the next working day.
-
If you require urgent dispatch or Saturday delivery, please call us before placing your order.
-
Do not schedule contractors or start work until goods have arrived and been checked — we cannot be held responsible for project delays due to late or damaged deliveries.
🚚 Next Day & Timed Delivery Options
We offer express shipping for orders needing a quicker turnaround:
| Service | Typical Cost* (Ex. VAT) |
|---|---|
| Next Day Delivery | £10.50 |
| Next Day AM Delivery | £15.00 |
| Specialist Items | £22–£25+ |
*Pricing depends on order contents and size. For mixed/tinted paint or specialist coatings, next-day delivery may cost more due to courier restrictions.
Please contact us if your order is time-sensitive — we’ll confirm what options are available based on your products and location.
📍 Delivery Outside UK Mainland
International Delivery
We are pleased to offer worldwide delivery on both parcel and pallet orders.
Parcel Shipments
All international parcel deliveries are handled by FedEx International. Shipping times and costs vary depending on destination, parcel size, and service availability.
Pallet Shipments (Including Dangerous Goods)
For palletised orders — including those containing dangerous goods - we work with independent specialist freight companies experienced in compliant global hazardous materials transport.
Due to the nature of these shipments, pricing and transit times are provided on a case‑by‑case basis.
Requesting an International Delivery Quote
If you would like to place an international order, simply get in touch and we will prepare a personalised shipping quote. Please provide the following details:
- Your full name
- Delivery address (including country and any required customs information)
- Details of the items you would like to order
- Quantities for each item
Once we have this information, we’ll handle the rest - from calculating the most suitable shipping method to arranging safe and compliant delivery to your destination.
🛠️ Specialist Products & Pallet Deliveries
Some coatings are made to order, particularly from premium brands like Sigma/PPG. These orders:
-
May have longer lead times
-
May carry a £150 + VAT delivery charge
-
Could require pallet delivery — a separate charge may apply
If your order requires palletisation, we’ll contact you after checkout to confirm delivery costs. You're also welcome to contact us first for a delivery quote before placing the order.
📦 Stock & Availability
We hold a large amount of stock ready for immediate dispatch, but:
-
Some products may need to be ordered in from manufacturers
-
Specialist items may be tinted or made to order, causing additional lead time
-
We’ll always aim to part-deliver where possible to avoid unnecessary delays
If you’re on a strict deadline, please get in touch before ordering so we can advise on delivery timeframes.
🚫 Delivery Liability
While we work hard to ensure your order arrives safely and on time, we use third-party carriers and cannot be held liable for:
-
Delays in transit
-
Lost shipments
-
Goods damaged in delivery
If your order is damaged or delayed, please let us know as soon as possible. We are not always informed automatically by the courier, so your input is essential.
We will work with you to resolve any issues — whether that means replacing items or chasing the carrier.
Note: Address changes after dispatch may incur additional charges, so please double-check your delivery details at checkout.
🧾 Payments & Order Processing
Orders are only processed once full cleared payment has been received.
You will receive email updates at each stage of the process:
-
Pending – order received
-
Processing – being picked, packed or manufactured
-
Dispatched – on the way with the carrier
-
Back order / Part dispatched – if stock is split or delayed
Need Help?
If you're unsure about shipping costs, timelines, or need your order by a specific date, we strongly recommend giving us a quick call before placing your order:
📞 01902 712286
📧 info@andrewscoatings.co.uk
We're here to help make sure you get the right product, in the right place, at the right time.





