Brickwork immediately after Watco Masonry Waterproofer treatment
Brick wall appearance after Watco Masonry Waterproofer dries clear
Roller applying Watco Masonry Waterproofer cream to exterior brickwork

Watco Masonry Waterproofer

Regular price£166.60
/
Size
How much do I need?

Litres required: 0.00L

Based on 5.0 m² per litre
  • Lightwork of heavy-duty repairs
  • Structural strength solutions

Watco Masonry Waterproofer is a penetrating cream treatment for protecting porous exterior masonry against wind-driven rain. Its silane and siloxane formulation lines the pores of the material to repel water while allowing the wall to breathe.

The white cream makes freshly treated areas easy to see, then penetrates and turns clear so the appearance of brick, stone or concrete is largely retained. It is suited to sound, unpainted masonry above ground level where a clear water-repellent treatment is preferred to a coloured coating. The cream can be applied with a roller, with a brush used around frames, deeper mortar joints and other details.

  • Clear-drying, breathable water-repellent treatment.
  • For suitable porous brick, stone, concrete and masonry.
  • Usually one coat, without a separate primer.

Surface Preparation

The surface must be clean, dry and absorbent enough for the cream to penetrate. Remove growth and loose material by wire brushing and repair cracks or open joints before treatment. Do not use detergents to prepare the wall. Newly pointed areas must be at least seven days old. Larger crevices need a suitable repair rather than relying on the waterproofer to bridge them.

Technical Data

Pack size 5L
Composition Single pack, silane siloxane emulsion
Finish White cream that dries clear
Intended use Exterior masonry above ground
Minimum application temperature 10°C
Shelf life 12 months unopened

Coverage

Approximately 25m² per 5L (5m²/L), depending on the porosity and texture of the masonry. One coat is usually sufficient. Measure the area and allow for detailed or highly absorbent surfaces.

Directions for Use

  1. Check a small inconspicuous area if the final appearance is important.
  2. Apply evenly by roller, using the temporary white appearance to check coverage.
  3. Brush into deep mortar beds, joints and areas the roller cannot reach. Treat carefully around window frames.
  4. Wipe splashes from paintwork or glass within a few minutes. The cream starts turning clear in about an hour; maximum penetration is generally reached after twenty-four to forty-eight hours.

Limitations

Use only on porous, unpainted surfaces. The treatment is intended for above-ground rain protection and will not solve rising damp or hydrostatic pressure below ground. It is not a crack filler: the technical sheet describes lining pores up to 0.3mm wide, with wider gaps needing repair. Drying and penetration depend on weather and substrate absorption. Store away from heat and direct sunlight and follow the safety sheet.

Product FAQs

Will it change the brick colour?
The cream turns clear as it penetrates, helping retain the masonry's appearance. A small trial is sensible where appearance is critical.

Will it stop rising damp in a cellar?
No. It is intended for above-ground masonry protection against rain, not below-ground hydrostatic pressure or rising damp.

Can it be applied over masonry paint?
No. The surface must be unpainted and porous so the waterproofer can penetrate.

How long before the treatment becomes clear?
It starts turning clear in around one hour and generally reaches maximum penetration in twenty-four to forty-eight hours, depending on conditions.

Data Sheets

Technical Data Sheet

Safety Data Sheet (GB)

We aim to deliver your products as quickly, safely and efficiently as possible. Below you'll find a full overview of our delivery process, options, pricing and terms. If you have any questions or a time-sensitive order, our team is always happy to help — just give us a call on 01902 712286.


📦 Standard Delivery

  • Free delivery on all orders over £100 + VAT within UK mainland.

  • For orders under £100 + VAT, a standard shipping fee will apply at checkout.

  • Orders are typically delivered within 2–5 working days after receipt of cleared payment.

We use Parcelforce and FedEx as our main carriers, though this may vary based on location or size of your order.


⚠️ Important Notes on Delivery

  • Orders placed after 12 midday (Monday–Friday) are usually dispatched the next working day.

  • If you require urgent dispatch or Saturday delivery, please call us before placing your order.

  • Do not schedule contractors or start work until goods have arrived and been checked — we cannot be held responsible for project delays due to late or damaged deliveries.


🚚 Next Day & Timed Delivery Options

We offer express shipping for orders needing a quicker turnaround:

Service Typical Cost* (Ex. VAT)
Next Day Delivery £10.50
Next Day AM Delivery £15.00
Specialist Items £22–£25+

*Pricing depends on order contents and size. For mixed/tinted paint or specialist coatings, next-day delivery may cost more due to courier restrictions.

Please contact us if your order is time-sensitive — we’ll confirm what options are available based on your products and location.


📍 Delivery Outside UK Mainland

International Delivery

We are pleased to offer worldwide delivery on both parcel and pallet orders.

Parcel Shipments

All international parcel deliveries are handled by FedEx International. Shipping times and costs vary depending on destination, parcel size, and service availability.

Pallet Shipments (Including Dangerous Goods)

For palletised orders — including those containing dangerous goods - we work with independent specialist freight companies experienced in compliant global hazardous materials transport.
Due to the nature of these shipments, pricing and transit times are provided on a case‑by‑case basis.

Requesting an International Delivery Quote

If you would like to place an international order, simply get in touch and we will prepare a personalised shipping quote. Please provide the following details:

  • Your full name
  • Delivery address (including country and any required customs information)
  • Details of the items you would like to order
  • Quantities for each item

Once we have this information, we’ll handle the rest - from calculating the most suitable shipping method to arranging safe and compliant delivery to your destination.


🛠️ Specialist Products & Pallet Deliveries

Some coatings are made to order, particularly from premium brands like Sigma/PPG. These orders:

  • May have longer lead times

  • May carry a £150 + VAT delivery charge

  • Could require pallet delivery — a separate charge may apply

If your order requires palletisation, we’ll contact you after checkout to confirm delivery costs. You're also welcome to contact us first for a delivery quote before placing the order.


📦 Stock & Availability

We hold a large amount of stock ready for immediate dispatch, but:

  • Some products may need to be ordered in from manufacturers

  • Specialist items may be tinted or made to order, causing additional lead time

  • We’ll always aim to part-deliver where possible to avoid unnecessary delays

If you’re on a strict deadline, please get in touch before ordering so we can advise on delivery timeframes.


🚫 Delivery Liability

While we work hard to ensure your order arrives safely and on time, we use third-party carriers and cannot be held liable for:

  • Delays in transit

  • Lost shipments

  • Goods damaged in delivery

If your order is damaged or delayed, please let us know as soon as possible. We are not always informed automatically by the courier, so your input is essential.

We will work with you to resolve any issues — whether that means replacing items or chasing the carrier.

Note: Address changes after dispatch may incur additional charges, so please double-check your delivery details at checkout.


🧾 Payments & Order Processing

Orders are only processed once full cleared payment has been received.

You will receive email updates at each stage of the process:

  • Pending – order received

  • Processing – being picked, packed or manufactured

  • Dispatched – on the way with the carrier

  • Back order / Part dispatched – if stock is split or delayed


Need Help?

If you're unsure about shipping costs, timelines, or need your order by a specific date, we strongly recommend giving us a quick call before placing your order:
📞 01902 712286
📧 info@andrewscoatings.co.uk

We're here to help make sure you get the right product, in the right place, at the right time.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

Concrete floor repairs

Engineered for tough jobs. Manufactured to UK Trade Standards
Concrete repair

Anti-slip & GRP step edges

Combat slips & accidents in the workplace with our safety anti-slip solutions
Anti-Slip
Epoxy Floor Paint being applied by roller and pole with a man wearing spiked shoes
Andrews Coatings Ltd

Epoxy Floor Paints

High build, chemical resistance and hard wearing floor coatings

Recently viewed