Watco Powerfloat Sealer Anti Slip
Litres required: 0.00L
Based on 8.0 m² per litre- Lightwork of heavy-duty repairs
- Structural strength solutions
Watco Powerfloat Sealer Anti Slip gives suitable smooth concrete a clear protective finish with a fine slip-resistant texture. Designed for indoor power floated and other dense concrete floors, this two part epoxy sealer combines dustproofing and surface protection with an aggregate-enhanced finish.
Choose Gloss or Matt to suit the appearance of the floor. The water based resin is applied by roller, usually in one coat, without a separate primer. It is useful where a smooth industrial floor needs clear protection and improved grip. Correct cleaning, even application and good ventilation remain essential; Watco recommends mechanical preparation where practical, especially on very highly polished concrete.
- Clear, finely textured anti-slip epoxy sealer.
- Gloss and Matt options for interior concrete.
- Aggregate included in the resin component.
Surface Preparation
New concrete should dry for at least twenty-eight days. Remove oil, grease, dust and weak material and ensure the floor is clean and dry. Retained coatings must be sound and firmly bonded. Highly polished surfaces may need mechanical abrasion; confirm suitability and test a small area where appearance or adhesion is critical.
Technical Data
| Pack size | 5L |
|---|---|
| Finish | Clear, fine textured; Gloss or Matt |
| Composition | Two part, water based epoxy |
| Application range | 15–30°C |
| Pot life | Up to 2 hours at 20°C; apply promptly |
| Unopened shelf life | 12 months, as listed on the product page |
Coverage
Approximately 40m² per 5L per coat (8m²/L). Spread the mixed pack across a measured area of at least 40m². Avoid a heavy film: correct application helps the resin dry clear and the texture develop evenly.
Directions for Use
- Stir both components thoroughly, including the aggregate-bearing resin, to distribute the contents evenly.
- Combine the complete resin and curing agent in the outer tin and mix for two to three minutes, scraping the base and sides.
- Decant into a tray and apply with a medium pile roller. Use a brush for edges and maintain an even spread.
- Provide a through draught during cure. Plan for approximately sixteen hours at 15–20°C before general traffic and allow longer in less favourable conditions.
Limitations
For indoor use. Improved slip resistance does not remove the need to control spills and keep floors clean. Do not apply below 15°C or above 30°C. Thick application or inadequate ventilation can leave the finish cloudy. Not for bare metal; obtain advice for self-levelling compounds. Keep food out of the work area during application and cure. Condition material at 15–25°C before use and protect from frost.
Product FAQs
How does it differ from standard Powerfloat Sealer?
The Anti Slip version contains aggregate to produce a fine textured, slip-resistant finish. Standard Powerfloat Sealer produces a smooth finish.
Is the finish clear?
Yes. The liquid starts white or off-white and should cure clear with correct spreading, warmth and ventilation.
Do I add separate grit?
The technical sheet states the aggregate is pre-blended into the resin. Stir thoroughly to distribute it before combining the components.
How much floor does it cover?
Approximately 40m² per 5L for one coat. Measure the area and avoid applying the pack too thickly.
Data Sheets
Safety Data Sheet - Gloss Curing Agent (GB)
Safety Data Sheet - Gloss Resin (GB)
We aim to deliver your products as quickly, safely and efficiently as possible. Below you'll find a full overview of our delivery process, options, pricing and terms. If you have any questions or a time-sensitive order, our team is always happy to help — just give us a call on 01902 712286.
📦 Standard Delivery
-
Free delivery on all orders over £100 + VAT within UK mainland.
-
For orders under £100 + VAT, a standard shipping fee will apply at checkout.
-
Orders are typically delivered within 2–5 working days after receipt of cleared payment.
We use Parcelforce and FedEx as our main carriers, though this may vary based on location or size of your order.
⚠️ Important Notes on Delivery
-
Orders placed after 12 midday (Monday–Friday) are usually dispatched the next working day.
-
If you require urgent dispatch or Saturday delivery, please call us before placing your order.
-
Do not schedule contractors or start work until goods have arrived and been checked — we cannot be held responsible for project delays due to late or damaged deliveries.
🚚 Next Day & Timed Delivery Options
We offer express shipping for orders needing a quicker turnaround:
| Service | Typical Cost* (Ex. VAT) |
|---|---|
| Next Day Delivery | £10.50 |
| Next Day AM Delivery | £15.00 |
| Specialist Items | £22–£25+ |
*Pricing depends on order contents and size. For mixed/tinted paint or specialist coatings, next-day delivery may cost more due to courier restrictions.
Please contact us if your order is time-sensitive — we’ll confirm what options are available based on your products and location.
📍 Delivery Outside UK Mainland
International Delivery
We are pleased to offer worldwide delivery on both parcel and pallet orders.
Parcel Shipments
All international parcel deliveries are handled by FedEx International. Shipping times and costs vary depending on destination, parcel size, and service availability.
Pallet Shipments (Including Dangerous Goods)
For palletised orders — including those containing dangerous goods - we work with independent specialist freight companies experienced in compliant global hazardous materials transport.
Due to the nature of these shipments, pricing and transit times are provided on a case‑by‑case basis.
Requesting an International Delivery Quote
If you would like to place an international order, simply get in touch and we will prepare a personalised shipping quote. Please provide the following details:
- Your full name
- Delivery address (including country and any required customs information)
- Details of the items you would like to order
- Quantities for each item
Once we have this information, we’ll handle the rest - from calculating the most suitable shipping method to arranging safe and compliant delivery to your destination.
🛠️ Specialist Products & Pallet Deliveries
Some coatings are made to order, particularly from premium brands like Sigma/PPG. These orders:
-
May have longer lead times
-
May carry a £150 + VAT delivery charge
-
Could require pallet delivery — a separate charge may apply
If your order requires palletisation, we’ll contact you after checkout to confirm delivery costs. You're also welcome to contact us first for a delivery quote before placing the order.
📦 Stock & Availability
We hold a large amount of stock ready for immediate dispatch, but:
-
Some products may need to be ordered in from manufacturers
-
Specialist items may be tinted or made to order, causing additional lead time
-
We’ll always aim to part-deliver where possible to avoid unnecessary delays
If you’re on a strict deadline, please get in touch before ordering so we can advise on delivery timeframes.
🚫 Delivery Liability
While we work hard to ensure your order arrives safely and on time, we use third-party carriers and cannot be held liable for:
-
Delays in transit
-
Lost shipments
-
Goods damaged in delivery
If your order is damaged or delayed, please let us know as soon as possible. We are not always informed automatically by the courier, so your input is essential.
We will work with you to resolve any issues — whether that means replacing items or chasing the carrier.
Note: Address changes after dispatch may incur additional charges, so please double-check your delivery details at checkout.
🧾 Payments & Order Processing
Orders are only processed once full cleared payment has been received.
You will receive email updates at each stage of the process:
-
Pending – order received
-
Processing – being picked, packed or manufactured
-
Dispatched – on the way with the carrier
-
Back order / Part dispatched – if stock is split or delayed
Need Help?
If you're unsure about shipping costs, timelines, or need your order by a specific date, we strongly recommend giving us a quick call before placing your order:
📞 01902 712286
📧 info@andrewscoatings.co.uk
We're here to help make sure you get the right product, in the right place, at the right time.
