Watco Asphalt Easy Fill
- Lightwork of heavy-duty repairs
- Structural strength solutions
Watco Asphalt Easy Fill is a flexible black sealant for cracks in asphalt and tarmac. Its rubberised bitumen formulation seals the opening and helps protect the surface against water ingress and erosion. The cartridge fits a standard skeleton gun, making it convenient for small repairs along a crack or joint.
It can also be used on concrete, metal, stone and brick, with compatibility checked where needed. The sealant moves with the substrate and is suitable for indoor and outdoor applications. Use it where a flexible seal is needed around local surface damage and the joint dimensions fall within Watco’s guidance.
Surface Preparation
Clean the sides of the crack or joint and remove dust, loose debris, grease and contamination that could affect adhesion. Allow the surface to dry. Check the width and depth along the run before estimating the number of cartridges, since a changing profile uses a different amount of sealant.
Prepare the whole area before opening the cartridge. The nozzle allows controlled placement along the gap, while a standard cartridge gun provides steady pressure as you work.
Technical Data
- Pack size is 310ml. The single-pack sealant is black.
- Composition is rubberised bitumen emulsion.
- Movement capability is approximately ±5%, as stated in the technical sheet.
- Allow approximately 24 hours to dry in dry conditions.
- Guide coverage is about 3m at a 10mm-wide × 10mm-deep section.
- The technical sheet gives 5.3m at 10mm wide × 6mm deep, or 1m at 25mm wide × 12mm deep.
- Shelf life is 24 months in an unopened cartridge.
Directions for Use
Cut the cartridge tip without damaging its thread. Trim the nozzle at 45 degrees and screw it securely onto the cartridge. Fit it into the skeleton gun and apply along the prepared crack or joint, controlling the flow so the gap is filled consistently.
Follow the pack instructions for finishing and allow the sealant to dry before returning the repaired area to use. Keep food away during application and curing, and refer to the safety sheet for handling advice.
Limitations
Asphalt Easy Fill is unsuitable for EPDM rubber roofs. Check compatibility with other materials if uncertain. Store in shaded, dry conditions between 5°C and 25°C and protect from freezing.
Coverage figures are guides to a consistent joint section. Make allowance for variations in depth and application waste when ordering. For larger broken-out asphalt defects, check the repair depths of Concrex Asphalt Repair.
Product FAQs
What gun do I need?
The 310ml cartridge fits a standard skeleton or cartridge gun.
How much will one cartridge cover?
Allow about 3m at 10mm wide and 10mm deep. Smaller sections cover more length, and wider or deeper gaps consume more sealant.
Does it remain flexible?
Yes. It is a flexible rubberised bitumen sealant, with approximately ±5% movement capability stated in the technical sheet.
How long should it dry?
Allow approximately 24 hours in dry conditions. Follow the pack instructions and check the repair before returning it to use.
Data Sheets
We aim to deliver your products as quickly, safely and efficiently as possible. Below you'll find a full overview of our delivery process, options, pricing and terms. If you have any questions or a time-sensitive order, our team is always happy to help — just give us a call on 01902 712286.
📦 Standard Delivery
-
Free delivery on all orders over £100 + VAT within UK mainland.
-
For orders under £100 + VAT, a standard shipping fee will apply at checkout.
-
Orders are typically delivered within 2–5 working days after receipt of cleared payment.
We use Parcelforce and FedEx as our main carriers, though this may vary based on location or size of your order.
⚠️ Important Notes on Delivery
-
Orders placed after 12 midday (Monday–Friday) are usually dispatched the next working day.
-
If you require urgent dispatch or Saturday delivery, please call us before placing your order.
-
Do not schedule contractors or start work until goods have arrived and been checked — we cannot be held responsible for project delays due to late or damaged deliveries.
🚚 Next Day & Timed Delivery Options
We offer express shipping for orders needing a quicker turnaround:
| Service | Typical Cost* (Ex. VAT) |
|---|---|
| Next Day Delivery | £10.50 |
| Next Day AM Delivery | £15.00 |
| Specialist Items | £22–£25+ |
*Pricing depends on order contents and size. For mixed/tinted paint or specialist coatings, next-day delivery may cost more due to courier restrictions.
Please contact us if your order is time-sensitive — we’ll confirm what options are available based on your products and location.
📍 Delivery Outside UK Mainland
International Delivery
We are pleased to offer worldwide delivery on both parcel and pallet orders.
Parcel Shipments
All international parcel deliveries are handled by FedEx International. Shipping times and costs vary depending on destination, parcel size, and service availability.
Pallet Shipments (Including Dangerous Goods)
For palletised orders — including those containing dangerous goods - we work with independent specialist freight companies experienced in compliant global hazardous materials transport.
Due to the nature of these shipments, pricing and transit times are provided on a case‑by‑case basis.
Requesting an International Delivery Quote
If you would like to place an international order, simply get in touch and we will prepare a personalised shipping quote. Please provide the following details:
- Your full name
- Delivery address (including country and any required customs information)
- Details of the items you would like to order
- Quantities for each item
Once we have this information, we’ll handle the rest - from calculating the most suitable shipping method to arranging safe and compliant delivery to your destination.
🛠️ Specialist Products & Pallet Deliveries
Some coatings are made to order, particularly from premium brands like Sigma/PPG. These orders:
-
May have longer lead times
-
May carry a £150 + VAT delivery charge
-
Could require pallet delivery — a separate charge may apply
If your order requires palletisation, we’ll contact you after checkout to confirm delivery costs. You're also welcome to contact us first for a delivery quote before placing the order.
📦 Stock & Availability
We hold a large amount of stock ready for immediate dispatch, but:
-
Some products may need to be ordered in from manufacturers
-
Specialist items may be tinted or made to order, causing additional lead time
-
We’ll always aim to part-deliver where possible to avoid unnecessary delays
If you’re on a strict deadline, please get in touch before ordering so we can advise on delivery timeframes.
🚫 Delivery Liability
While we work hard to ensure your order arrives safely and on time, we use third-party carriers and cannot be held liable for:
-
Delays in transit
-
Lost shipments
-
Goods damaged in delivery
If your order is damaged or delayed, please let us know as soon as possible. We are not always informed automatically by the courier, so your input is essential.
We will work with you to resolve any issues — whether that means replacing items or chasing the carrier.
Note: Address changes after dispatch may incur additional charges, so please double-check your delivery details at checkout.
🧾 Payments & Order Processing
Orders are only processed once full cleared payment has been received.
You will receive email updates at each stage of the process:
-
Pending – order received
-
Processing – being picked, packed or manufactured
-
Dispatched – on the way with the carrier
-
Back order / Part dispatched – if stock is split or delayed
Need Help?
If you're unsure about shipping costs, timelines, or need your order by a specific date, we strongly recommend giving us a quick call before placing your order:
📞 01902 712286
📧 info@andrewscoatings.co.uk
We're here to help make sure you get the right product, in the right place, at the right time.
