Watco Bitu-Mend Pour & Restore
Litres required: 0.00L
Based on 0.0666667 m² per litre- Lightwork of heavy-duty repairs
- Structural strength solutions
Watco Bitu-Mend Pour & Restore is a pourable epoxy repair compound for shallow damage in asphalt and tarmac. It restores pitted, worn, cracked and dished areas, helping create a more even surface in car parks, yards and pavements.
The mixed material flows into shallow defects and can be spread with a trowel to follow the surrounding surface. A granite finishing aggregate is scattered over the wet repair to produce a black, slip-resistant finish. This makes it useful for resurfacing local areas of deteriorated asphalt where a deep pothole filler would be difficult to spread in a thin section.
Surface Preparation
Remove loose stones, dirt, oil and other contamination from the repair. Brush out the area thoroughly and leave a sound base. The surface should preferably be dry, although slight dampness is acceptable. Avoid leaving loose debris that could interfere with adhesion or the finished profile.
Check the depth across the whole area before mixing. Pour & Restore is designed for shallow resurfacing between 6.5mm and 20mm thick. Plan the work so the mixed compound can be placed and finished within its short working life.
Technical Data
- Pack size: 15kg; finished colour: black.
- Type: pourable epoxy asphalt repair compound with finishing aggregate.
- Coverage: approximately 1m² per pack at 10mm thick.
- Application depth: 6.5–20mm.
- Working life: approximately 15 minutes at 20°C, shorter in warmer conditions.
- Touch dry: approximately 1 hour at 20–25°C.
- Ready for traffic: approximately 16 hours at 20–25°C.
- Shelf life: 24 months in unopened containers.
Directions for Use
Add the curing agent and, where appropriate, the accelerator to the resin and aggregate in the outer bucket. Mix thoroughly with a wide-bladed tool, ensuring the sides and base are incorporated.
Do not add the accelerator if the temperature is above 23°C, or if you need a longer working life for several small repairs. Follow the technical data sheet for the mixing sequence. Pour into the prepared area and spread with a trowel. Before the compound cures, scatter the supplied finishing aggregate over the surface to complete the repair.
Limitations
Use for shallow resurfacing rather than deep potholes. For deeper defects, consider Watco Bitu-Mend Deep Fill or Watco Bitu-Mend Advanced, checking their individual depth requirements. Coverage varies with depth and surface condition. Keep traffic off until sufficiently cured; cooler conditions extend curing times. Store above 10°C and protect from freezing.
Product FAQs
What type of asphalt damage can it repair?
It is designed for shallow, worn, pitted, cracked or dished asphalt and tarmac, including local repairs in car parks, yards and pavements.
How thick should I apply it?
Apply between 6.5mm and 20mm thick. One 15kg pack covers approximately 1m² at 10mm depth.
When should I leave out the accelerator?
Do not add it when the temperature is above 23°C, or when a longer working life is needed for several small repairs. Follow the technical data sheet's mixing instructions.
When can traffic use the repaired area?
At 20–25°C, the typical traffic-ready time is 16 hours. Lower temperatures extend curing time; keep traffic off until the material has cured sufficiently.
Data Sheets
- Technical Data Sheet
- Safety Data Sheet – Accelerator (GB)
- Safety Data Sheet – Curing Agent (GB)
- Safety Data Sheet – Resin (GB)
- Safety Data Sheet – Scatter Aggregate (GB)
- Safety Data Sheet – Accelerator (GBNI)
- Safety Data Sheet – Curing Agent (GBNI)
- Safety Data Sheet – Resin (GBNI)
- Safety Data Sheet – Scatter Aggregate (GBNI)
We aim to deliver your products as quickly, safely and efficiently as possible. Below you'll find a full overview of our delivery process, options, pricing and terms. If you have any questions or a time-sensitive order, our team is always happy to help — just give us a call on 01902 712286.
📦 Standard Delivery
-
Free delivery on all orders over £100 + VAT within UK mainland.
-
For orders under £100 + VAT, a standard shipping fee will apply at checkout.
-
Orders are typically delivered within 2–5 working days after receipt of cleared payment.
We use Parcelforce and FedEx as our main carriers, though this may vary based on location or size of your order.
⚠️ Important Notes on Delivery
-
Orders placed after 12 midday (Monday–Friday) are usually dispatched the next working day.
-
If you require urgent dispatch or Saturday delivery, please call us before placing your order.
-
Do not schedule contractors or start work until goods have arrived and been checked — we cannot be held responsible for project delays due to late or damaged deliveries.
🚚 Next Day & Timed Delivery Options
We offer express shipping for orders needing a quicker turnaround:
| Service | Typical Cost* (Ex. VAT) |
|---|---|
| Next Day Delivery | £10.50 |
| Next Day AM Delivery | £15.00 |
| Specialist Items | £22–£25+ |
*Pricing depends on order contents and size. For mixed/tinted paint or specialist coatings, next-day delivery may cost more due to courier restrictions.
Please contact us if your order is time-sensitive — we’ll confirm what options are available based on your products and location.
📍 Delivery Outside UK Mainland
International Delivery
We are pleased to offer worldwide delivery on both parcel and pallet orders.
Parcel Shipments
All international parcel deliveries are handled by FedEx International. Shipping times and costs vary depending on destination, parcel size, and service availability.
Pallet Shipments (Including Dangerous Goods)
For palletised orders — including those containing dangerous goods - we work with independent specialist freight companies experienced in compliant global hazardous materials transport.
Due to the nature of these shipments, pricing and transit times are provided on a case‑by‑case basis.
Requesting an International Delivery Quote
If you would like to place an international order, simply get in touch and we will prepare a personalised shipping quote. Please provide the following details:
- Your full name
- Delivery address (including country and any required customs information)
- Details of the items you would like to order
- Quantities for each item
Once we have this information, we’ll handle the rest - from calculating the most suitable shipping method to arranging safe and compliant delivery to your destination.
🛠️ Specialist Products & Pallet Deliveries
Some coatings are made to order, particularly from premium brands like Sigma/PPG. These orders:
-
May have longer lead times
-
May carry a £150 + VAT delivery charge
-
Could require pallet delivery — a separate charge may apply
If your order requires palletisation, we’ll contact you after checkout to confirm delivery costs. You're also welcome to contact us first for a delivery quote before placing the order.
📦 Stock & Availability
We hold a large amount of stock ready for immediate dispatch, but:
-
Some products may need to be ordered in from manufacturers
-
Specialist items may be tinted or made to order, causing additional lead time
-
We’ll always aim to part-deliver where possible to avoid unnecessary delays
If you’re on a strict deadline, please get in touch before ordering so we can advise on delivery timeframes.
🚫 Delivery Liability
While we work hard to ensure your order arrives safely and on time, we use third-party carriers and cannot be held liable for:
-
Delays in transit
-
Lost shipments
-
Goods damaged in delivery
If your order is damaged or delayed, please let us know as soon as possible. We are not always informed automatically by the courier, so your input is essential.
We will work with you to resolve any issues — whether that means replacing items or chasing the carrier.
Note: Address changes after dispatch may incur additional charges, so please double-check your delivery details at checkout.
🧾 Payments & Order Processing
Orders are only processed once full cleared payment has been received.
You will receive email updates at each stage of the process:
-
Pending – order received
-
Processing – being picked, packed or manufactured
-
Dispatched – on the way with the carrier
-
Back order / Part dispatched – if stock is split or delayed
Need Help?
If you're unsure about shipping costs, timelines, or need your order by a specific date, we strongly recommend giving us a quick call before placing your order:
📞 01902 712286
📧 info@andrewscoatings.co.uk
We're here to help make sure you get the right product, in the right place, at the right time.
